From: Domenico Andreoli <domenico.andreoli@linux.com>
To: Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@bootlin.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] PCI/MSI: mvebu: Re-enable arch fallbacks
Date: Wed, 16 Mar 2022 10:33:15 +0100 [thread overview]
Message-ID: <YjGu2zJo9hGGg/jZ@localhost> (raw)
From: Domenico Andreoli <domenico.andreoli@linux.com>
Since v5.10, my QNAP happily barks at boot as follows (5.17.0-rc8):
[ 0.923811] ------------[ cut here ]------------
[ 0.928458] WARNING: CPU: 0 PID: 1 at drivers/pci/msi/msi.h:17 pci_msi_setup_msi_irqs+0x54/0x6c
[ 0.937219] Modules linked in:
[ 0.940290] CPU: 0 PID: 1 Comm: swapper Not tainted 5.17.0-rc8-marvell #6
[ 0.947117] Hardware name: Marvell Kirkwood (Flattened Device Tree)
[ 0.953428] unwind_backtrace from show_stack+0x10/0x14
[ 0.958698] show_stack from __warn+0xac/0xe4
[ 0.963093] __warn from warn_slowpath_fmt+0x68/0x80
[ 0.968098] warn_slowpath_fmt from pci_msi_setup_msi_irqs+0x54/0x6c
[ 0.974499] pci_msi_setup_msi_irqs from __pci_enable_msi_range+0x260/0x340
[ 0.981509] __pci_enable_msi_range from pci_alloc_irq_vectors_affinity+0xb8/0xf8
[ 0.989043] pci_alloc_irq_vectors_affinity from xhci_run+0x164/0x474
[ 0.995532] xhci_run from usb_add_hcd+0x444/0x6e0
[ 1.000362] usb_add_hcd from usb_hcd_pci_probe+0x30c/0x37c
[ 1.005979] usb_hcd_pci_probe from xhci_pci_probe+0x10/0xec
[ 1.011689] xhci_pci_probe from pci_device_probe+0x74/0xe8
[ 1.017305] pci_device_probe from really_probe+0x1c0/0x3f8
[ 1.022921] really_probe from driver_probe_device+0x30/0xb0
[ 1.028623] driver_probe_device from __driver_attach+0x11c/0x148
[ 1.034762] __driver_attach from bus_for_each_dev+0x54/0x78
[ 1.040466] bus_for_each_dev from bus_add_driver+0x170/0x1d8
[ 1.046256] bus_add_driver from driver_register+0xac/0xf0
[ 1.051783] driver_register from do_one_initcall+0x74/0x1b8
[ 1.057495] do_one_initcall from kernel_init_freeable+0x1a8/0x1ec
[ 1.063723] kernel_init_freeable from kernel_init+0x10/0x108
[ 1.069514] kernel_init from ret_from_fork+0x14/0x3c
[ 1.074604] Exception stack(0xc1835fb0 to 0xc1835ff8)
[ 1.079691] 5fa0: 00000000 00000000 00000000 00000000
[ 1.087915] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.096136] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.102787] ---[ end trace 0000000000000000 ]---
[ 1.107435] ------------[ cut here ]------------
I bisected it down to commit 077ee78e392869e46ae (PCI/MSI: Make
arch_.*_msi_irq[s] fallbacks selectable).
Re-enabling PCI/MSI arch fallbacks restores a clean bootlog.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
---
arch/arm/mach-mvebu/Kconfig | 1 +
1 file changed, 1 insertion(+)
Index: b/arch/arm/mach-mvebu/Kconfig
===================================================================
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -123,6 +123,7 @@ config MACH_KIRKWOOD
select ORION_IRQCHIP
select ORION_TIMER
select FORCE_PCI
+ select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
select PCI_QUIRKS
select PINCTRL_KIRKWOOD
help
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-03-16 9:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-16 9:33 Domenico Andreoli [this message]
2022-03-16 11:37 ` [PATCH] PCI/MSI: mvebu: Re-enable arch fallbacks Marc Zyngier
2022-03-16 13:04 ` Domenico Andreoli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YjGu2zJo9hGGg/jZ@localhost \
--to=domenico.andreoli@linux.com \
--cc=andrew@lunn.ch \
--cc=gregory.clement@bootlin.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).