From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Beno?t Cousson <bcousson@baylibre.com>,
Tony Lindgren <tony@atomide.com>,
Fabio Estevam <festevam@gmail.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
soc@kernel.org, Andy Gross <agross@kernel.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-arm-msm@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
linux-omap@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] ARM: dts: Fix more boolean properties with values
Date: Mon, 11 Apr 2022 21:26:56 -0500 [thread overview]
Message-ID: <YlTjcNNM/22wtjSY@builder.lan> (raw)
In-Reply-To: <20220407225107.2175958-1-robh@kernel.org>
On Thu 07 Apr 17:51 CDT 2022, Rob Herring wrote:
> Boolean properties in DT are present or not present and don't take a value.
> A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
> matter.
>
> It may have been intended that 0 values are false, but there is no change
> in behavior with this patch.
>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Cc: Sascha Hauer <s.hauer@pengutronix.de>
> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
> Cc: Fabio Estevam <festevam@gmail.com>
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Cc: "Benoît Cousson" <bcousson@baylibre.com>
> Cc: Tony Lindgren <tony@atomide.com>
> Cc: Andy Gross <agross@kernel.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-omap@vger.kernel.org
> Cc: linux-arm-msm@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> arch/arm/boot/dts/at91-sam9_l9260.dts | 2 +-
> arch/arm/boot/dts/imx28-ts4600.dts | 2 +-
> arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi | 4 ++--
> arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++----
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> 4 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
> index 1e2a28c2f365..2fb51b9aca2a 100644
> --- a/arch/arm/boot/dts/at91-sam9_l9260.dts
> +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
> @@ -101,7 +101,7 @@ pinctrl_board_mmc0: mmc0-board {
> nand0: nand@40000000 {
> nand-bus-width = <8>;
> nand-ecc-mode = "soft";
> - nand-on-flash-bbt = <1>;
> + nand-on-flash-bbt;
> status = "okay";
> };
>
> diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
> index 097ec35c62d8..0d58da1c0cc5 100644
> --- a/arch/arm/boot/dts/imx28-ts4600.dts
> +++ b/arch/arm/boot/dts/imx28-ts4600.dts
> @@ -26,7 +26,7 @@ ssp0: spi@80010000 {
> pinctrl-0 = <&mmc0_4bit_pins_a
> &mmc0_sck_cfg
> &en_sd_pwr>;
> - broken-cd = <1>;
> + broken-cd;
> bus-width = <4>;
> vmmc-supply = <®_vddio_sd0>;
> status = "okay";
> diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
> index b4664ab00256..d3da8b1b473b 100644
> --- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
> +++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
> @@ -118,8 +118,8 @@ usb@6,0 {
> gpmc,device-width = <2>;
> gpmc,wait-pin = <0>;
> gpmc,burst-length = <4>;
> - gpmc,cycle2cycle-samecsen = <1>;
> - gpmc,cycle2cycle-diffcsen = <1>;
> + gpmc,cycle2cycle-samecsen;
> + gpmc,cycle2cycle-diffcsen;
> gpmc,cs-on-ns = <0>;
> gpmc,cs-rd-off-ns = <45>;
> gpmc,cs-wr-off-ns = <45>;
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 996f4458d9fc..8cb04aa8ed2f 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -972,7 +972,7 @@ gmac0: ethernet@37000000 {
>
> snps,axi-config = <&stmmac_axi_setup>;
> snps,pbl = <32>;
> - snps,aal = <1>;
> + snps,aal;
>
> qcom,nss-common = <&nss_common>;
> qcom,qsgmii-csr = <&qsgmii_csr>;
> @@ -996,7 +996,7 @@ gmac1: ethernet@37200000 {
>
> snps,axi-config = <&stmmac_axi_setup>;
> snps,pbl = <32>;
> - snps,aal = <1>;
> + snps,aal;
>
> qcom,nss-common = <&nss_common>;
> qcom,qsgmii-csr = <&qsgmii_csr>;
> @@ -1020,7 +1020,7 @@ gmac2: ethernet@37400000 {
>
> snps,axi-config = <&stmmac_axi_setup>;
> snps,pbl = <32>;
> - snps,aal = <1>;
> + snps,aal;
>
> qcom,nss-common = <&nss_common>;
> qcom,qsgmii-csr = <&qsgmii_csr>;
> @@ -1044,7 +1044,7 @@ gmac3: ethernet@37600000 {
>
> snps,axi-config = <&stmmac_axi_setup>;
> snps,pbl = <32>;
> - snps,aal = <1>;
> + snps,aal;
>
> qcom,nss-common = <&nss_common>;
> qcom,qsgmii-csr = <&qsgmii_csr>;
> --
> 2.32.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2022-04-12 2:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 22:51 [PATCH] ARM: dts: Fix more boolean properties with values Rob Herring
2022-04-08 6:16 ` Claudiu.Beznea
2022-04-12 2:26 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YlTjcNNM/22wtjSY@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=alexandre.belloni@bootlin.com \
--cc=bcousson@baylibre.com \
--cc=claudiu.beznea@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-omap@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=soc@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).