From: Abel Vesa <abel.vesa@nxp.com>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: sboyd@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V2 1/2] clk: imx: add mcore_booted module paratemter
Date: Tue, 12 Apr 2022 13:48:44 +0300 [thread overview]
Message-ID: <YlVZDGhbY0rCWHnk@abelvesa> (raw)
In-Reply-To: <20220228124112.3974242-1-peng.fan@oss.nxp.com>
On 22-02-28 20:41:11, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> Add mcore_booted boot parameter which could simplify AMP clock
> management. To i.MX8M, there is CCM(clock control Module) to generate
> clock root clock, anatop(analog PLL module) to generate PLL, and CCGR
> (clock gating) to gate clocks to peripherals. As below:
> anatop->ccm->ccgr->peripheral
>
> Linux handles the clock management and the auxiliary core is under
> control of Linux. Although there is per hardware domain control for CCGR
> and CCM, auxiliary core normally only use CCGR hardware domain control
> to avoid linux gate off the clk to peripherals and leave CCM ana anatop
> to Linux.
>
> Per NXP hardware design, because CCGR already support gate to
> peripherals, and clk root gate power leakage is negligible. So
> when in AMP case, we could not register the clk root gate.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied both, thanks.
> ---
>
> V2:
> Switch to use module parameter, tested on i.MX8MP-EVK
>
> drivers/clk/imx/clk-imx8mm.c | 2 ++
> drivers/clk/imx/clk-imx8mn.c | 2 ++
> drivers/clk/imx/clk-imx8mp.c | 2 ++
> drivers/clk/imx/clk-imx8mq.c | 2 ++
> drivers/clk/imx/clk.c | 3 +++
> drivers/clk/imx/clk.h | 1 +
> 6 files changed, 12 insertions(+)
>
> diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
> index e8cbe181ec06..a452fd1bb891 100644
> --- a/drivers/clk/imx/clk-imx8mm.c
> +++ b/drivers/clk/imx/clk-imx8mm.c
> @@ -639,6 +639,8 @@ static struct platform_driver imx8mm_clk_driver = {
> },
> };
> module_platform_driver(imx8mm_clk_driver);
> +module_param(mcore_booted, bool, S_IRUGO);
> +MODULE_PARM_DESC(mcore_booted, "See Cortex-M core is booted or not");
>
> MODULE_AUTHOR("Bai Ping <ping.bai@nxp.com>");
> MODULE_DESCRIPTION("NXP i.MX8MM clock driver");
> diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
> index 92fcbab4f5be..dc69b7464b3d 100644
> --- a/drivers/clk/imx/clk-imx8mn.c
> +++ b/drivers/clk/imx/clk-imx8mn.c
> @@ -594,6 +594,8 @@ static struct platform_driver imx8mn_clk_driver = {
> },
> };
> module_platform_driver(imx8mn_clk_driver);
> +module_param(mcore_booted, bool, S_IRUGO);
> +MODULE_PARM_DESC(mcore_booted, "See Cortex-M core is booted or not");
>
> MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
> MODULE_DESCRIPTION("NXP i.MX8MN clock driver");
> diff --git a/drivers/clk/imx/clk-imx8mp.c b/drivers/clk/imx/clk-imx8mp.c
> index 18f5b7c3ca9d..250e45d9f844 100644
> --- a/drivers/clk/imx/clk-imx8mp.c
> +++ b/drivers/clk/imx/clk-imx8mp.c
> @@ -721,6 +721,8 @@ static struct platform_driver imx8mp_clk_driver = {
> },
> };
> module_platform_driver(imx8mp_clk_driver);
> +module_param(mcore_booted, bool, S_IRUGO);
> +MODULE_PARM_DESC(mcore_booted, "See Cortex-M core is booted or not");
>
> MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
> MODULE_DESCRIPTION("NXP i.MX8MP clock driver");
> diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
> index 83cc2b1c3294..33897b56130d 100644
> --- a/drivers/clk/imx/clk-imx8mq.c
> +++ b/drivers/clk/imx/clk-imx8mq.c
> @@ -632,6 +632,8 @@ static struct platform_driver imx8mq_clk_driver = {
> },
> };
> module_platform_driver(imx8mq_clk_driver);
> +module_param(mcore_booted, bool, S_IRUGO);
> +MODULE_PARM_DESC(mcore_booted, "See Cortex-M core is booted or not");
>
> MODULE_AUTHOR("Abel Vesa <abel.vesa@nxp.com>");
> MODULE_DESCRIPTION("NXP i.MX8MQ clock driver");
> diff --git a/drivers/clk/imx/clk.c b/drivers/clk/imx/clk.c
> index 7cc669934253..4bd6ad060eea 100644
> --- a/drivers/clk/imx/clk.c
> +++ b/drivers/clk/imx/clk.c
> @@ -17,6 +17,9 @@
> DEFINE_SPINLOCK(imx_ccm_lock);
> EXPORT_SYMBOL_GPL(imx_ccm_lock);
>
> +bool mcore_booted;
> +EXPORT_SYMBOL_GPL(mcore_booted);
> +
> void imx_unregister_clocks(struct clk *clks[], unsigned int count)
> {
> unsigned int i;
> diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
> index a7cbbcd1a3f4..5061a06468df 100644
> --- a/drivers/clk/imx/clk.h
> +++ b/drivers/clk/imx/clk.h
> @@ -7,6 +7,7 @@
> #include <linux/clk-provider.h>
>
> extern spinlock_t imx_ccm_lock;
> +extern bool mcore_booted;
>
> void imx_check_clocks(struct clk *clks[], unsigned int count);
> void imx_check_clk_hws(struct clk_hw *clks[], unsigned int count);
> --
> 2.25.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2022-04-12 11:25 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-28 12:41 [PATCH V2 1/2] clk: imx: add mcore_booted module paratemter Peng Fan (OSS)
2022-02-28 12:41 ` [PATCH V2 2/2] clk: imx8m: check mcore_booted before register clk Peng Fan (OSS)
2022-03-17 19:38 ` Stephen Boyd
2022-03-18 1:15 ` Peng Fan
2022-04-12 8:11 ` Abel Vesa
2022-04-12 8:14 ` Abel Vesa
2022-03-17 19:37 ` [PATCH V2 1/2] clk: imx: add mcore_booted module paratemter Stephen Boyd
2022-03-18 1:14 ` Peng Fan
2022-04-12 7:58 ` Abel Vesa
2022-04-12 10:48 ` Abel Vesa [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YlVZDGhbY0rCWHnk@abelvesa \
--to=abel.vesa@nxp.com \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.fan@nxp.com \
--cc=peng.fan@oss.nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).