From: Jisheng Zhang <jszhang@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
arm@kernel.org, soc@kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Rob Herring <robh@kernel.org>
Subject: Re: [RESEND PATCH] arm64: dts: synaptics: remove unused DTSI for AS370
Date: Tue, 17 May 2022 20:49:37 +0800 [thread overview]
Message-ID: <YoOZ4TawKslvu01w@xhacker> (raw)
In-Reply-To: <20220407204115.34350-1-krzysztof.kozlowski@linaro.org>
On Thu, Apr 07, 2022 at 10:41:15PM +0200, Krzysztof Kozlowski wrote:
> The as370.dtsi for Synaptics AS370 SoC does not have a user (DTS board
> file), is uncompilable and untestable. It was added back in 2018. No
> user appeared since that time, so assume it won't be added.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Jisheng Zhang <jszhang@kernel.org>
Hi Arnd, Olof,
This is the only one patch of berlin-soc for v5.19, Can you please
take it?
Thanks in advance
>
> ---
>
> The AS370 board was submitted for review in Aug 2021 [1] but after few
> comments there were no resubmits, so basically this is still a dead
> DTSI.
>
> [1] https://lore.kernel.org/all/CAK8P3a2vkZVt1bb7-iDGaSHp20U9d8QXu6AcrUMceJSS9Q_-4Q@mail.gmail.com/
> ---
> .../devicetree/bindings/arm/syna.txt | 4 -
> arch/arm64/boot/dts/synaptics/as370.dtsi | 173 ------------------
> 2 files changed, 177 deletions(-)
> delete mode 100644 arch/arm64/boot/dts/synaptics/as370.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/syna.txt b/Documentation/devicetree/bindings/arm/syna.txt
> index d8b48f2edf1b..851f48ead927 100644
> --- a/Documentation/devicetree/bindings/arm/syna.txt
> +++ b/Documentation/devicetree/bindings/arm/syna.txt
> @@ -18,10 +18,6 @@ stable binding/ABI.
>
> ---------------------------------------------------------------
>
> -Boards with the Synaptics AS370 SoC shall have the following properties:
> - Required root node property:
> - compatible: "syna,as370"
> -
> Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
> shall have the following properties:
>
> diff --git a/arch/arm64/boot/dts/synaptics/as370.dtsi b/arch/arm64/boot/dts/synaptics/as370.dtsi
> deleted file mode 100644
> index 4bb5d650df9c..000000000000
> --- a/arch/arm64/boot/dts/synaptics/as370.dtsi
> +++ /dev/null
> @@ -1,173 +0,0 @@
> -// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> -/*
> - * Copyright (C) 2018 Synaptics Incorporated
> - *
> - * Author: Jisheng Zhang <jszhang@kernel.org>
> - */
> -
> -#include <dt-bindings/interrupt-controller/arm-gic.h>
> -
> -/ {
> - compatible = "syna,as370";
> - interrupt-parent = <&gic>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> -
> - psci {
> - compatible = "arm,psci-1.0";
> - method = "smc";
> - };
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - cpu0: cpu@0 {
> - compatible = "arm,cortex-a53";
> - device_type = "cpu";
> - reg = <0x0>;
> - enable-method = "psci";
> - next-level-cache = <&l2>;
> - cpu-idle-states = <&CPU_SLEEP_0>;
> - };
> -
> - cpu1: cpu@1 {
> - compatible = "arm,cortex-a53";
> - device_type = "cpu";
> - reg = <0x1>;
> - enable-method = "psci";
> - next-level-cache = <&l2>;
> - cpu-idle-states = <&CPU_SLEEP_0>;
> - };
> -
> - cpu2: cpu@2 {
> - compatible = "arm,cortex-a53";
> - device_type = "cpu";
> - reg = <0x2>;
> - enable-method = "psci";
> - next-level-cache = <&l2>;
> - cpu-idle-states = <&CPU_SLEEP_0>;
> - };
> -
> - cpu3: cpu@3 {
> - compatible = "arm,cortex-a53";
> - device_type = "cpu";
> - reg = <0x3>;
> - enable-method = "psci";
> - next-level-cache = <&l2>;
> - cpu-idle-states = <&CPU_SLEEP_0>;
> - };
> -
> - l2: cache {
> - compatible = "cache";
> - };
> -
> - idle-states {
> - entry-method = "psci";
> - CPU_SLEEP_0: cpu-sleep-0 {
> - compatible = "arm,idle-state";
> - local-timer-stop;
> - arm,psci-suspend-param = <0x0010000>;
> - entry-latency-us = <75>;
> - exit-latency-us = <155>;
> - min-residency-us = <1000>;
> - };
> - };
> - };
> -
> - osc: osc {
> - compatible = "fixed-clock";
> - #clock-cells = <0>;
> - clock-frequency = <25000000>;
> - };
> -
> - pmu {
> - compatible = "arm,cortex-a53-pmu";
> - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-affinity = <&cpu0>,
> - <&cpu1>,
> - <&cpu2>,
> - <&cpu3>;
> - };
> -
> - timer {
> - compatible = "arm,armv8-timer";
> - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
> - };
> -
> - soc@f7000000 {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0 0xf7000000 0x1000000>;
> -
> - gic: interrupt-controller@901000 {
> - compatible = "arm,gic-400";
> - #interrupt-cells = <3>;
> - interrupt-controller;
> - reg = <0x901000 0x1000>,
> - <0x902000 0x2000>,
> - <0x904000 0x2000>,
> - <0x906000 0x2000>;
> - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> - };
> -
> - apb@e80000 {
> - compatible = "simple-bus";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0xe80000 0x10000>;
> -
> - uart0: serial@c00 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0xc00 0x100>;
> - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&osc>;
> - reg-shift = <2>;
> - status = "disabled";
> - };
> -
> - gpio0: gpio@1800 {
> - compatible = "snps,dw-apb-gpio";
> - reg = <0x1800 0x400>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - porta: gpio-port@0 {
> - compatible = "snps,dw-apb-gpio-port";
> - gpio-controller;
> - #gpio-cells = <2>;
> - ngpios = <32>;
> - reg = <0>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> - };
> - };
> -
> - gpio1: gpio@2000 {
> - compatible = "snps,dw-apb-gpio";
> - reg = <0x2000 0x400>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - portb: gpio-port@1 {
> - compatible = "snps,dw-apb-gpio-port";
> - gpio-controller;
> - #gpio-cells = <2>;
> - ngpios = <32>;
> - reg = <0>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> - };
> - };
> - };
> - };
> -};
> --
> 2.32.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-05-17 13:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-07 20:41 [RESEND PATCH] arm64: dts: synaptics: remove unused DTSI for AS370 Krzysztof Kozlowski
2022-05-17 12:49 ` Jisheng Zhang [this message]
2022-05-17 14:56 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YoOZ4TawKslvu01w@xhacker \
--to=jszhang@kernel.org \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox