public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: sean.wang@mediatek.com, matthias.bgg@gmail.com,
	dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	kernel@collabora.com, nfraprado@collabora.com
Subject: Re: [PATCH v2 1/2] dmaengine: mediatek-cqdma: Add SoC-specific match data
Date: Thu, 19 May 2022 23:30:50 +0530	[thread overview]
Message-ID: <YoaF0mOudZ7zll/7@matsya> (raw)
In-Reply-To: <20220503140624.117213-2-angelogioacchino.delregno@collabora.com>

On 03-05-22, 16:06, AngeloGioacchino Del Regno wrote:
> On some SoCs the DST2 and SRC2 registers may be at a different offset:
> add a match data structure and assign it to mt6765 as a preparation
> for adding support for more SoCs.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  drivers/dma/mediatek/mtk-cqdma.c | 35 +++++++++++++++++++++++++-------
>  1 file changed, 28 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/dma/mediatek/mtk-cqdma.c b/drivers/dma/mediatek/mtk-cqdma.c
> index f8847c48ba03..a2fb538d9483 100644
> --- a/drivers/dma/mediatek/mtk-cqdma.c
> +++ b/drivers/dma/mediatek/mtk-cqdma.c
> @@ -48,8 +48,6 @@
>  #define MTK_CQDMA_DST			0x20
>  #define MTK_CQDMA_LEN1			0x24
>  #define MTK_CQDMA_LEN2			0x28
> -#define MTK_CQDMA_SRC2			0x60
> -#define MTK_CQDMA_DST2			0x64
>  
>  /* Registers setting */
>  #define MTK_CQDMA_EN_BIT		BIT(0)
> @@ -126,9 +124,20 @@ struct mtk_cqdma_vchan {
>  	bool issue_synchronize;
>  };
>  
> +/**
> + * struct mtk_cqdma_plat_data - SoC specific parameters
> + * @reg_dst2:               dst2 register offset
> + * @reg_src2:               src2 register offset
> + */
> +struct mtk_cqdma_plat_data {
> +	u8 reg_src2;
> +	u8 reg_dst2;
> +};
> +
>  /**
>   * struct mtk_cqdma_device - The struct holding info describing CQDMA
>   *                          device
> + * @plat:                   SoC-specific platform data
>   * @ddev:                   An instance for struct dma_device
>   * @clk:                    The clock that device internal is using
>   * @dma_requests:           The number of VCs the device supports to
> @@ -137,6 +146,7 @@ struct mtk_cqdma_vchan {
>   * @pc:                     The pointer to all the underlying PCs
>   */
>  struct mtk_cqdma_device {
> +	const struct mtk_cqdma_plat_data *plat;
>  	struct dma_device ddev;
>  	struct clk *clk;
>  
> @@ -231,6 +241,8 @@ static int mtk_cqdma_hard_reset(struct mtk_cqdma_pchan *pc)
>  static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,
>  			    struct mtk_cqdma_vdesc *cvd)
>  {
> +	struct mtk_cqdma_device *cqdma = to_cqdma_dev(cvd->ch);
> +
>  	/* wait for the previous transaction done */
>  	if (mtk_cqdma_poll_engine_done(pc, true) < 0)
>  		dev_err(cqdma2dev(to_cqdma_dev(cvd->ch)), "cqdma wait transaction timeout\n");
> @@ -243,17 +255,17 @@ static void mtk_cqdma_start(struct mtk_cqdma_pchan *pc,
>  	/* setup the source */
>  	mtk_dma_set(pc, MTK_CQDMA_SRC, cvd->src & MTK_CQDMA_ADDR_LIMIT);
>  #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
> -	mtk_dma_set(pc, MTK_CQDMA_SRC2, cvd->src >> MTK_CQDMA_ADDR2_SHFIT);
> +	mtk_dma_set(pc, cqdma->plat->reg_src2, cvd->src >> MTK_CQDMA_ADDR2_SHFIT);
>  #else
> -	mtk_dma_set(pc, MTK_CQDMA_SRC2, 0);
> +	mtk_dma_set(pc, cqdma->plat->reg_src2, 0);
>  #endif
>  
>  	/* setup the destination */
>  	mtk_dma_set(pc, MTK_CQDMA_DST, cvd->dest & MTK_CQDMA_ADDR_LIMIT);
>  #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
> -	mtk_dma_set(pc, MTK_CQDMA_DST2, cvd->dest >> MTK_CQDMA_ADDR2_SHFIT);
> +	mtk_dma_set(pc, cqdma->plat->reg_dst2, cvd->dest >> MTK_CQDMA_ADDR2_SHFIT);
>  #else
> -	mtk_dma_set(pc, MTK_CQDMA_DST2, 0);
> +	mtk_dma_set(pc, cqdma->plat->reg_dst2, 0);
>  #endif
>  
>  	/* setup the length */
> @@ -740,8 +752,13 @@ static void mtk_cqdma_hw_deinit(struct mtk_cqdma_device *cqdma)
>  	pm_runtime_disable(cqdma2dev(cqdma));
>  }
>  
> +static const struct mtk_cqdma_plat_data cqdma_mt6765 = {
> +	.reg_dst2 = 0x64,
> +	.reg_src2 = 0x60,

Please use the macros instead of magic numbers here

> +};
> +
>  static const struct of_device_id mtk_cqdma_match[] = {
> -	{ .compatible = "mediatek,mt6765-cqdma" },
> +	{ .compatible = "mediatek,mt6765-cqdma", .data = &cqdma_mt6765 },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mtk_cqdma_match);
> @@ -758,6 +775,10 @@ static int mtk_cqdma_probe(struct platform_device *pdev)
>  	if (!cqdma)
>  		return -ENOMEM;
>  
> +	cqdma->plat = device_get_match_data(&pdev->dev);
> +	if (cqdma->plat)
> +		return -EINVAL;
> +
>  	dd = &cqdma->ddev;
>  
>  	cqdma->clk = devm_clk_get(&pdev->dev, "cqdma");
> -- 
> 2.35.1

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-05-19 18:02 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-03 14:06 [PATCH v2 0/2] MediaTek Helio X10 MT6795 - CQDMA driver AngeloGioacchino Del Regno
2022-05-03 14:06 ` [PATCH v2 1/2] dmaengine: mediatek-cqdma: Add SoC-specific match data AngeloGioacchino Del Regno
2022-05-19 18:00   ` Vinod Koul [this message]
2022-05-03 14:06 ` [PATCH v2 2/2] dmaengine: mediatek-cqdma: Add support for MediaTek MT6795 AngeloGioacchino Del Regno
2022-05-19 18:01   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YoaF0mOudZ7zll/7@matsya \
    --to=vkoul@kernel.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=nfraprado@collabora.com \
    --cc=sean.wang@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox