* [PATCH RESEND] phy: samsung: exynosautov9-ufs: correct TSRV register configurations
[not found] <CGME20220603050554epcas2p27d36b694e2f48cc796ddc34432c5808f@epcas2p2.samsung.com>
@ 2022-06-03 5:05 ` Chanho Park
2022-06-08 16:26 ` Vinod Koul
0 siblings, 1 reply; 2+ messages in thread
From: Chanho Park @ 2022-06-03 5:05 UTC (permalink / raw)
To: Kishon Vijay Abraham I, Vinod Koul, Krzysztof Kozlowski,
Alim Akhtar
Cc: linux-phy, linux-arm-kernel, Chanho Park
For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register
configurations. So, it must be
s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g
Fixes: d64519249e1d ("phy: samsung-ufs: support exynosauto ufs phy driver")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
- Correct commit message of substitution command
drivers/phy/samsung/phy-exynosautov9-ufs.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/samsung/phy-exynosautov9-ufs.c b/drivers/phy/samsung/phy-exynosautov9-ufs.c
index 36398a15c2db..d043dfdb598a 100644
--- a/drivers/phy/samsung/phy-exynosautov9-ufs.c
+++ b/drivers/phy/samsung/phy-exynosautov9-ufs.c
@@ -31,22 +31,22 @@ static const struct samsung_ufs_phy_cfg exynosautov9_pre_init_cfg[] = {
PHY_COMN_REG_CFG(0x023, 0xc0, PWR_MODE_ANY),
PHY_COMN_REG_CFG(0x023, 0x00, PWR_MODE_ANY),
- PHY_TRSV_REG_CFG(0x042, 0x5d, PWR_MODE_ANY),
- PHY_TRSV_REG_CFG(0x043, 0x80, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x042, 0x5d, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x043, 0x80, PWR_MODE_ANY),
END_UFS_PHY_CFG,
};
/* Calibration for HS mode series A/B */
static const struct samsung_ufs_phy_cfg exynosautov9_pre_pwr_hs_cfg[] = {
- PHY_TRSV_REG_CFG(0x032, 0xbc, PWR_MODE_HS_ANY),
- PHY_TRSV_REG_CFG(0x03c, 0x7f, PWR_MODE_HS_ANY),
- PHY_TRSV_REG_CFG(0x048, 0xc0, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x032, 0xbc, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x03c, 0x7f, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG_AUTOV9(0x048, 0xc0, PWR_MODE_HS_ANY),
- PHY_TRSV_REG_CFG(0x04a, 0x00, PWR_MODE_HS_G3_SER_B),
- PHY_TRSV_REG_CFG(0x04b, 0x10, PWR_MODE_HS_G1_SER_B |
- PWR_MODE_HS_G3_SER_B),
- PHY_TRSV_REG_CFG(0x04d, 0x63, PWR_MODE_HS_G3_SER_B),
+ PHY_TRSV_REG_CFG_AUTOV9(0x04a, 0x00, PWR_MODE_HS_G3_SER_B),
+ PHY_TRSV_REG_CFG_AUTOV9(0x04b, 0x10, PWR_MODE_HS_G1_SER_B |
+ PWR_MODE_HS_G3_SER_B),
+ PHY_TRSV_REG_CFG_AUTOV9(0x04d, 0x63, PWR_MODE_HS_G3_SER_B),
END_UFS_PHY_CFG,
};
--
2.36.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH RESEND] phy: samsung: exynosautov9-ufs: correct TSRV register configurations
2022-06-03 5:05 ` [PATCH RESEND] phy: samsung: exynosautov9-ufs: correct TSRV register configurations Chanho Park
@ 2022-06-08 16:26 ` Vinod Koul
0 siblings, 0 replies; 2+ messages in thread
From: Vinod Koul @ 2022-06-08 16:26 UTC (permalink / raw)
To: Chanho Park
Cc: Kishon Vijay Abraham I, Krzysztof Kozlowski, Alim Akhtar,
linux-phy, linux-arm-kernel
On 03-06-22, 14:05, Chanho Park wrote:
> For exynos auto v9's UFS MPHY, We should use 0x50 offset of TSRV register
> configurations. So, it must be
>
> s/PHY_TRSV_REG_CFG/PHY_TRSV_REG_CFG_AUTOV9/g
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-06-08 16:27 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20220603050554epcas2p27d36b694e2f48cc796ddc34432c5808f@epcas2p2.samsung.com>
2022-06-03 5:05 ` [PATCH RESEND] phy: samsung: exynosautov9-ufs: correct TSRV register configurations Chanho Park
2022-06-08 16:26 ` Vinod Koul
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox