From: Mark Rutland <mark.rutland@arm.com>
To: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
Marc Zyngier <maz@kernel.org>, Will Deacon <will@kernel.org>,
Kees Cook <keescook@chromium.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Mark Brown <broonie@kernel.org>,
Anshuman Khandual <anshuman.khandual@arm.com>
Subject: Re: [PATCH v5 03/21] arm64: head: move assignment of idmap_t0sz to C code
Date: Sun, 26 Jun 2022 10:36:37 +0100 [thread overview]
Message-ID: <YrgopfW5O0RnRwup@FVFF77S0Q05N> (raw)
In-Reply-To: <20220624150651.1358849-4-ardb@kernel.org>
On Fri, Jun 24, 2022 at 05:06:33PM +0200, Ard Biesheuvel wrote:
> Setting idmap_t0sz involves fiddling with the caches if done with the
> MMU off. Since we will be creating an initial ID map with the MMU and
> caches off, and the permanent ID map with the MMU and caches on, let's
> move this assignment of idmap_t0sz out of the startup code, and replace
> it with a macro that simply issues the three instructions needed to
> calculate the value wherever it is needed before the MMU is turned on.
>
> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
> ---
> arch/arm64/include/asm/assembler.h | 14 ++++++++++++++
> arch/arm64/include/asm/mmu_context.h | 2 +-
> arch/arm64/kernel/head.S | 13 +------------
> arch/arm64/mm/mmu.c | 4 +++-
> arch/arm64/mm/proc.S | 2 +-
> 5 files changed, 20 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
> index 8c5a61aeaf8e..9468f45c07a6 100644
> --- a/arch/arm64/include/asm/assembler.h
> +++ b/arch/arm64/include/asm/assembler.h
> @@ -359,6 +359,20 @@ alternative_cb_end
> bfi \valreg, \t1sz, #TCR_T1SZ_OFFSET, #TCR_TxSZ_WIDTH
> .endm
>
> +/*
> + * idmap_get_t0sz - get the T0SZ value needed to cover the ID map
> + *
> + * Calculate the maximum allowed value for TCR_EL1.T0SZ so that the
> + * entire ID map region can be mapped. As T0SZ == (64 - #bits used),
> + * this number conveniently equals the number of leading zeroes in
> + * the physical address of _end.
> + */
> + .macro idmap_get_t0sz, reg
> + adrp \reg, _end
> + orr \reg, \reg, #(1 << VA_BITS_MIN) - 1
> + clz \reg, \reg
> + .endm
I understand we ORR in the VA_BITS_MIN case so that we don't calculate a
smaller size than we'll create tables for. That might be worht a comment, but either way:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Mark.
> +
> /*
> * tcr_compute_pa_size - set TCR.(I)PS to the highest supported
> * ID_AA64MMFR0_EL1.PARange value
> diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
> index 6770667b34a3..6ac0086ebb1a 100644
> --- a/arch/arm64/include/asm/mmu_context.h
> +++ b/arch/arm64/include/asm/mmu_context.h
> @@ -60,7 +60,7 @@ static inline void cpu_switch_mm(pgd_t *pgd, struct mm_struct *mm)
> * TCR_T0SZ(VA_BITS), unless system RAM is positioned very high in
> * physical memory, in which case it will be smaller.
> */
> -extern u64 idmap_t0sz;
> +extern int idmap_t0sz;
> extern u64 idmap_ptrs_per_pgd;
>
> /*
> diff --git a/arch/arm64/kernel/head.S b/arch/arm64/kernel/head.S
> index dc07858eb673..7f361bc72d12 100644
> --- a/arch/arm64/kernel/head.S
> +++ b/arch/arm64/kernel/head.S
> @@ -299,22 +299,11 @@ SYM_FUNC_START_LOCAL(__create_page_tables)
> * physical address space. So for the ID map, use an extended virtual
> * range in that case, and configure an additional translation level
> * if needed.
> - *
> - * Calculate the maximum allowed value for TCR_EL1.T0SZ so that the
> - * entire ID map region can be mapped. As T0SZ == (64 - #bits used),
> - * this number conveniently equals the number of leading zeroes in
> - * the physical address of __idmap_text_end.
> */
> - adrp x5, __idmap_text_end
> - clz x5, x5
> + idmap_get_t0sz x5
> cmp x5, TCR_T0SZ(VA_BITS_MIN) // default T0SZ small enough?
> b.ge 1f // .. then skip VA range extension
>
> - adr_l x6, idmap_t0sz
> - str x5, [x6]
> - dmb sy
> - dc ivac, x6 // Invalidate potentially stale cache line
> -
> #if (VA_BITS < 48)
> #define EXTRA_SHIFT (PGDIR_SHIFT + PAGE_SHIFT - 3)
> #define EXTRA_PTRS (1 << (PHYS_MASK_SHIFT - EXTRA_SHIFT))
> diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
> index a6392656d589..f875c4954e22 100644
> --- a/arch/arm64/mm/mmu.c
> +++ b/arch/arm64/mm/mmu.c
> @@ -43,7 +43,7 @@
> #define NO_CONT_MAPPINGS BIT(1)
> #define NO_EXEC_MAPPINGS BIT(2) /* assumes FEAT_HPDS is not used */
>
> -u64 idmap_t0sz = TCR_T0SZ(VA_BITS_MIN);
> +int idmap_t0sz __ro_after_init;
> u64 idmap_ptrs_per_pgd = PTRS_PER_PGD;
>
> #if VA_BITS > 48
> @@ -774,6 +774,8 @@ void __init paging_init(void)
> {
> pgd_t *pgdp = pgd_set_fixmap(__pa_symbol(swapper_pg_dir));
>
> + idmap_t0sz = 63UL - __fls(__pa_symbol(_end) | GENMASK(VA_BITS_MIN - 1, 0));
> +
> map_kernel(pgdp);
> map_mem(pgdp);
>
> diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
> index 972ce8d7f2c5..97cd67697212 100644
> --- a/arch/arm64/mm/proc.S
> +++ b/arch/arm64/mm/proc.S
> @@ -470,7 +470,7 @@ SYM_FUNC_START(__cpu_setup)
> add x9, x9, #64
> tcr_set_t1sz tcr, x9
> #else
> - ldr_l x9, idmap_t0sz
> + idmap_get_t0sz x9
> #endif
> tcr_set_t0sz tcr, x9
>
> --
> 2.35.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-06-26 9:37 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-24 15:06 [PATCH v5 00/21] arm64: refactor boot flow Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 01/21] arm64: head: move kimage_vaddr variable into C file Ard Biesheuvel
2022-06-26 9:22 ` Mark Rutland
2022-06-24 15:06 ` [PATCH v5 02/21] arm64: mm: make vabits_actual a build time constant if possible Ard Biesheuvel
2022-06-26 9:31 ` Mark Rutland
2022-06-24 15:06 ` [PATCH v5 03/21] arm64: head: move assignment of idmap_t0sz to C code Ard Biesheuvel
2022-06-26 9:36 ` Mark Rutland [this message]
2022-06-24 15:06 ` [PATCH v5 04/21] arm64: head: drop idmap_ptrs_per_pgd Ard Biesheuvel
2022-06-26 9:37 ` Mark Rutland
2022-06-24 15:06 ` [PATCH v5 05/21] arm64: head: simplify page table mapping macros (slightly) Ard Biesheuvel
2022-06-26 10:07 ` Mark Rutland
2022-06-24 15:06 ` [PATCH v5 06/21] arm64: head: switch to map_memory macro for the extended ID map Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 07/21] arm64: head: split off idmap creation code Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 08/21] arm64: kernel: drop unnecessary PoC cache clean+invalidate Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 09/21] arm64: head: pass ID map root table address to __enable_mmu() Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 10/21] arm64: mm: provide idmap pointer to cpu_replace_ttbr1() Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 11/21] arm64: head: add helper function to remap regions in early page tables Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 12/21] arm64: head: cover entire kernel image in initial ID map Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 13/21] arm64: head: use relative references to the RELA and RELR tables Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 14/21] arm64: head: create a temporary FDT mapping in the initial ID map Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 15/21] arm64: idreg-override: use early FDT mapping in " Ard Biesheuvel
2022-07-11 15:39 ` Mark Rutland
2022-07-12 17:03 ` Ard Biesheuvel
2022-07-13 14:09 ` Mark Rutland
2022-06-24 15:06 ` [PATCH v5 16/21] arm64: head: factor out TTBR1 assignment into a macro Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 17/21] arm64: head: populate kernel page tables with MMU and caches on Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 18/21] arm64: head: record CPU boot mode after enabling the MMU Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 19/21] arm64: kaslr: defer initialization to initcall where permitted Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 20/21] arm64: head: avoid relocating the kernel twice for KASLR Ard Biesheuvel
2022-06-24 15:06 ` [PATCH v5 21/21] arm64: setup: drop early FDT pointer helpers Ard Biesheuvel
2022-06-24 17:13 ` [PATCH v5 00/21] arm64: refactor boot flow Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YrgopfW5O0RnRwup@FVFF77S0Q05N \
--to=mark.rutland@arm.com \
--cc=anshuman.khandual@arm.com \
--cc=ardb@kernel.org \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=keescook@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox