Re: [BUG] USB broken on rk3568 based R2Pro

From: Vinod Koul <vkoul@kernel.org>
To: Peter Geis <pgwipeout@gmail.com>
Cc: Frank Wunderlich <frank-w@public-files.de>,
	Samuel Holland <samuel@sholland.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"open list:GENERIC PHY FRAMEWORK" <linux-phy@lists.infradead.org>,
	arm-mail-list <linux-arm-kernel@lists.infradead.org>,
	"open list:ARM/Rockchip SoC..."
	<linux-rockchip@lists.infradead.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Heiko Stuebner <heiko@sntech.de>
Subject: Re: [BUG] USB broken on rk3568 based R2Pro
Date: Fri, 8 Jul 2022 10:46:15 +0530	[thread overview]
Message-ID: <Yse9nz9jjRoiPq6K@matsya> (raw)
In-Reply-To: <CAMdYzYrs0oJXVcViOmJk4E7PSTeP5TYs0O_ePHmrcAiKtOAWXQ@mail.gmail.com>

On 07-07-22, 15:41, Peter Geis wrote:
> On Thu, Jul 7, 2022 at 1:51 PM Frank Wunderlich <frank-w@public-files.de> wrote:
> >
> > Hi,
> >
> > traced it down with manual reverts to this one:
> >
> > commit 6a98df08ccd55e87947d253b19925691763e755c
> >     phy: rockchip-inno-usb2: Fix muxed interrupt support
> >
> > luckily i can revert only this and now upper usb-port works again
> >
> > @samuel: have you an idea how to fix your problem without breaking my board? :)
> >
> > @greg/Vinod: maybe we can add a revert of this in mainline till issue is resolved?

Lets give it a few days if we can find a fix, if not we can revert

> >
> > regards Frank
> 
> I don't know what you're running, but with the standard arm64
> defconfig w/ all rockchip stuff built in, I have no issues here on
> 5.19.

Please share the config and other details on what your running so that
Peter can repro this...

> Note, the following changes are necessary to the 5.19 dts here:
> Remove the extcon from usb_host0_xhci, as the production model doesn't
> have automatic switching capabilities. The ID pin was removed in favor
> of the usb debug function which also doesn't work.
> Add dr_mode = "host" to the same node, for the same reason.
> 
> >
> >
> > > Von: "Frank Wunderlich" <frank-w@public-files.de>
> > > i noticed that upper usb-Port (otg) is broken on my Bananapi R2Pro with 5.19-rc1, works with 5.18.0
> > >
> > > this port is a usb3 (xhci) port which includes an usb2-phy and should support otg, but i still want
> > > to use it in host-only mode (USB-A socket).
> > >
> > > already tried setting dr_mode in dts back to "host" as this was changed in rk356x.dtsi by this commit:
> > >
> > > bc405bb3eeee 2022-04-25 arm64: dts: rockchip: enable otg/drd operation of usb_host0_xhci in rk356x
> > >
> > > i see no error in dmesg and usb-controllers seem to be initialized completely (visible in lsusb).
> > >
> > > r2pro has ID-Pin not connected, so i tried also peters Patch without success :(
> >

-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel