From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "Andrew Lunn" <andrew@lunn.ch>,
"Heiner Kallweit" <hkallweit1@gmail.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Alvin __ipraga" <alsi@bang-olufsen.dk>,
"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
"Claudiu Manoil" <claudiu.manoil@nxp.com>,
"Daniel Scally" <djrscally@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"DENG Qingfang" <dqfext@gmail.com>,
"Eric Dumazet" <edumazet@google.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"George McCollister" <george.mccollister@gmail.com>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Heikki Krogerus" <heikki.krogerus@linux.intel.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Kurt Kanzenbach" <kurt@linutronix.de>,
"Landen Chao" <Landen.Chao@mediatek.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mediatek@lists.infradead.org,
"Matthias Brugger" <matthias.bgg@gmail.com>,
netdev@vger.kernel.org, "Paolo Abeni" <pabeni@redhat.com>,
"Rafael J. Wysocki" <rafael@kernel.org>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Sean Wang" <sean.wang@mediatek.com>,
UNGLinuxDriver@microchip.com,
"Vivien Didelot" <vivien.didelot@gmail.com>,
"Vladimir Oltean" <olteanv@gmail.com>,
"Woojung Huh" <woojung.huh@microchip.com>,
"Marek Behún" <kabel@kernel.org>
Subject: Re: [PATCH RFC net-next v2 2/6] software node: allow named software node to be created
Date: Fri, 15 Jul 2022 09:42:20 +0100 [thread overview]
Message-ID: <YtEobF3wRaOKwPZT@shell.armlinux.org.uk> (raw)
In-Reply-To: <E1oBd1n-006UCq-JK@rmk-PC.armlinux.org.uk>
Hi Andy,
Please can you let me know whether you happy with this patch? I would
like to send this series to net-next today.
Thanks.
On Wed, Jul 13, 2022 at 03:07:47PM +0100, Russell King wrote:
> From: Vladimir Oltean <vladimir.oltean@nxp.com>
>
> Allow a named software node to be created, which is needed for software
> nodes for a fixed-link specification for DSA.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
> drivers/base/swnode.c | 14 ++++++++++++--
> include/linux/property.h | 4 ++++
> 2 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c
> index 0a482212c7e8..b2ea08f0e898 100644
> --- a/drivers/base/swnode.c
> +++ b/drivers/base/swnode.c
> @@ -972,8 +972,9 @@ void software_node_unregister(const struct software_node *node)
> EXPORT_SYMBOL_GPL(software_node_unregister);
>
> struct fwnode_handle *
> -fwnode_create_software_node(const struct property_entry *properties,
> - const struct fwnode_handle *parent)
> +fwnode_create_named_software_node(const struct property_entry *properties,
> + const struct fwnode_handle *parent,
> + const char *name)
> {
> struct fwnode_handle *fwnode;
> struct software_node *node;
> @@ -991,6 +992,7 @@ fwnode_create_software_node(const struct property_entry *properties,
> return ERR_CAST(node);
>
> node->parent = p ? p->node : NULL;
> + node->name = name;
>
> fwnode = swnode_register(node, p, 1);
> if (IS_ERR(fwnode))
> @@ -998,6 +1000,14 @@ fwnode_create_software_node(const struct property_entry *properties,
>
> return fwnode;
> }
> +EXPORT_SYMBOL_GPL(fwnode_create_named_software_node);
> +
> +struct fwnode_handle *
> +fwnode_create_software_node(const struct property_entry *properties,
> + const struct fwnode_handle *parent)
> +{
> + return fwnode_create_named_software_node(properties, parent, NULL);
> +}
> EXPORT_SYMBOL_GPL(fwnode_create_software_node);
>
> void fwnode_remove_software_node(struct fwnode_handle *fwnode)
> diff --git a/include/linux/property.h b/include/linux/property.h
> index a5b429d623f6..23330ae2b1fa 100644
> --- a/include/linux/property.h
> +++ b/include/linux/property.h
> @@ -492,6 +492,10 @@ void software_node_unregister(const struct software_node *node);
> struct fwnode_handle *
> fwnode_create_software_node(const struct property_entry *properties,
> const struct fwnode_handle *parent);
> +struct fwnode_handle *
> +fwnode_create_named_software_node(const struct property_entry *properties,
> + const struct fwnode_handle *parent,
> + const char *name);
> void fwnode_remove_software_node(struct fwnode_handle *fwnode);
>
> int device_add_software_node(struct device *dev, const struct software_node *node);
> --
> 2.30.2
>
>
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-07-15 8:43 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 14:06 [PATCH RFC v2 0/6] net: dsa: always use phylink Russell King (Oracle)
2022-07-13 14:07 ` [PATCH RFC net-next v2 1/6] net: phylink: split out and export interface to caps translation Russell King (Oracle)
2022-07-13 14:44 ` Marek Behún
2022-07-13 14:07 ` [PATCH RFC net-next v2 2/6] software node: allow named software node to be created Russell King
2022-07-13 14:43 ` Marek Behún
2022-07-15 8:42 ` Russell King (Oracle) [this message]
2022-07-13 14:07 ` [PATCH RFC net-next v2 3/6] net: dsa: add support for retrieving the interface mode Russell King (Oracle)
2022-07-13 14:07 ` [PATCH RFC net-next v2 4/6] net: dsa: mv88e6xxx: report the default interface mode for the port Russell King (Oracle)
2022-07-13 14:08 ` [PATCH RFC net-next v2 5/6] net: dsa: create swnode fixed-link if using default params Russell King (Oracle)
2022-07-13 14:48 ` Marek Behún
2022-07-13 14:08 ` [PATCH RFC net-next v2 6/6] net: dsa: mv88e6xxx: remove handling for DSA and CPU ports Russell King (Oracle)
2022-07-13 14:49 ` Marek Behún
2022-07-15 8:30 ` [PATCH RFC v2 0/6] net: dsa: always use phylink Marcin Wojtas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YtEobF3wRaOKwPZT@shell.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=Landen.Chao@mediatek.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alsi@bang-olufsen.dk \
--cc=andrew@lunn.ch \
--cc=andriy.shevchenko@linux.intel.com \
--cc=claudiu.manoil@nxp.com \
--cc=davem@davemloft.net \
--cc=djrscally@gmail.com \
--cc=dqfext@gmail.com \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=george.mccollister@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hauke@hauke-m.de \
--cc=heikki.krogerus@linux.intel.com \
--cc=hkallweit1@gmail.com \
--cc=kabel@kernel.org \
--cc=kuba@kernel.org \
--cc=kurt@linutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=rafael@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=sean.wang@mediatek.com \
--cc=vivien.didelot@gmail.com \
--cc=woojung.huh@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).