From: Frank Li <Frank.li@nxp.com>
To: Michael Nazzareno Trimarchi <michael@amarulasolutions.com>,
imx@lists.linux.dev
Cc: Fabio Estevam <festevam@gmail.com>,
shawnguo@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
ariel.dalessandro@collabora.com, Fabio Estevam <festevam@denx.de>,
Dario Binacchi <dario.binacchi@amarulasolutions.com>
Subject: Re: [PATCH] arm64: dts: imx8mn-bsh-smm-s2pro: Remove invalid audio codec clock
Date: Fri, 13 Dec 2024 16:23:12 -0500 [thread overview]
Message-ID: <Z1ylwPiSt/jRJV8w@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <CAOf5uwmg83-TVQvbNOCnzBh9JdQAC=5hpgbCeT-6qJ=+YBrssg@mail.gmail.com>
On Thu, Oct 17, 2024 at 01:50:13PM +0200, Michael Nazzareno Trimarchi wrote:
> Hi Fabio
>
> On Thu, Oct 17, 2024 at 1:43 PM Fabio Estevam <festevam@gmail.com> wrote:
> >
> > Hi Michael,
> >
> > On Tue, Aug 27, 2024 at 9:03 AM Michael Nazzareno Trimarchi
> > <michael@amarulasolutions.com> wrote:
> > >
> > > Hi Fabio
> > >
> > > On Wed, Aug 21, 2024 at 4:34 PM Fabio Estevam <festevam@gmail.com> wrote:
> > > >
> > > > From: Fabio Estevam <festevam@denx.de>
> > > >
> > > > According to ti,tlv320dac3100.yaml, 'clocks' is not a valid
> > > > property.
> > > >
> > > > Remove it to fix the following dt-schema warning:
> > > >
> > > > Unevaluated properties are not allowed ('clocks' was unexpected)
> > > >
> > > > Signed-off-by: Fabio Estevam <festevam@denx.de>
> > > > ---
> > > > arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts | 1 -
> > > > 1 file changed, 1 deletion(-)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> > > > index c6ad65becc97..475cbf9e0d1e 100644
> > > > --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> > > > @@ -64,7 +64,6 @@ tlv320dac3101: audio-codec@18 {
> > > > DVDD-supply = <&buck5_reg>;
> > > > reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> > > > ai31xx-micbias-vg = <MICBIAS_AVDDV>;
> > > > - clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
> > > > };
> > > > };
> > >
> > > Let's just give a test to the board
> >
> > Have you had a chance to test it?
>
> I will test on monday ;). Is that ok?
Any update ?
Frank
>
> Michael
>
> --
> Michael Nazzareno Trimarchi
> Co-Founder & Chief Executive Officer
> M. +39 347 913 2170
> michael@amarulasolutions.com
> __________________________________
>
> Amarula Solutions BV
> Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> T. +31 (0)85 111 9172
> info@amarulasolutions.com
> www.amarulasolutions.com
parent reply other threads:[~2024-12-13 21:24 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <CAOf5uwmg83-TVQvbNOCnzBh9JdQAC=5hpgbCeT-6qJ=+YBrssg@mail.gmail.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Z1ylwPiSt/jRJV8w@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=ariel.dalessandro@collabora.com \
--cc=conor+dt@kernel.org \
--cc=dario.binacchi@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@denx.de \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=michael@amarulasolutions.com \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox