[PATCH v3] i2c: imx: add imx7d compatible string for applying errata ERR007805

[PATCH v3] i2c: imx: add imx7d compatible string for applying errata ERR007805

[Carlos Song]

Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
compatible string table, at the result, "fsl,imx21-i2c" will be
matched, but it will cause errata ERR007805 not be applied in fact.

So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
the errata ERR007805(https://www.nxp.com/webapp/Download?colCode=
IMX7DS_2N09P).

"fsl,imx7d-i2c" already is documented in binding doc. This errata
fix has been included in imx6_i2c_hwdata and it is the same in all
I.MX6/7/8, so just reuse it.

Signed-off-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
Change for V3:
- No ACK, so resend this patch.
Change for V2:
- I have tried to fix this issue at imx7s.dtsi in V1, according to
  the community suggestion, I make V2 patch for i2c-imx driver to
  avoid updating the FDT to fix an errata. Discussion in V1:
  Subject: [PATCH] ARM: dts: imx7s: change i2c compatible string for applying errata ERR007805
  Message-ID: <20241021031148.2682015-1-carlos.song@nxp.com> (raw)
---
 drivers/i2c/busses/i2c-imx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 350346a7892c..9d5caa032c5c 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -335,6 +335,7 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx6sll-i2c", .data = &imx6_i2c_hwdata, },
 	{ .compatible = "fsl,imx6sx-i2c", .data = &imx6_i2c_hwdata, },
 	{ .compatible = "fsl,imx6ul-i2c", .data = &imx6_i2c_hwdata, },
+	{ .compatible = "fsl,imx7d-i2c", .data = &imx6_i2c_hwdata, },
 	{ .compatible = "fsl,imx7s-i2c", .data = &imx6_i2c_hwdata, },
 	{ .compatible = "fsl,imx8mm-i2c", .data = &imx6_i2c_hwdata, },
 	{ .compatible = "fsl,imx8mn-i2c", .data = &imx6_i2c_hwdata, },
-- 
2.34.1

Re: [PATCH v3] i2c: imx: add imx7d compatible string for applying errata ERR007805

[Frank Li]

On Wed, Dec 18, 2024 at 12:42:38PM +0800, Carlos Song wrote:
> Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
> compatible string table, at the result, "fsl,imx21-i2c" will be
> matched, but it will cause errata ERR007805 not be applied in fact.
>
> So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
> the errata ERR007805(https://www.nxp.com/webapp/Download?colCode=
> IMX7DS_2N09P).
>
> "fsl,imx7d-i2c" already is documented in binding doc. This errata
> fix has been included in imx6_i2c_hwdata and it is the same in all
> I.MX6/7/8, so just reuse it.
>
> Signed-off-by: Carlos Song <carlos.song@nxp.com>
> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
> Change for V3:
> - No ACK, so resend this patch.
> Change for V2:
> - I have tried to fix this issue at imx7s.dtsi in V1, according to
>   the community suggestion, I make V2 patch for i2c-imx driver to
>   avoid updating the FDT to fix an errata. Discussion in V1:
>   Subject: [PATCH] ARM: dts: imx7s: change i2c compatible string for applying errata ERR007805
>   Message-ID: <20241021031148.2682015-1-carlos.song@nxp.com> (raw)
> ---
>  drivers/i2c/busses/i2c-imx.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 350346a7892c..9d5caa032c5c 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -335,6 +335,7 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
>  	{ .compatible = "fsl,imx6sll-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx6sx-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx6ul-i2c", .data = &imx6_i2c_hwdata, },
> +	{ .compatible = "fsl,imx7d-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx7s-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx8mm-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx8mn-i2c", .data = &imx6_i2c_hwdata, },
> --
> 2.34.1
>

Re: [PATCH v3] i2c: imx: add imx7d compatible string for applying errata ERR007805

[Oleksij Rempel]

On Wed, Dec 18, 2024 at 12:42:38PM +0800, Carlos Song wrote:
> Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
                                       do not exist?
> compatible string table, at the result, "fsl,imx21-i2c" will be
> matched, but it will cause errata ERR007805 not be applied in fact.
> 
> So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
> the errata ERR007805(https://www.nxp.com/webapp/Download?colCode=
> IMX7DS_2N09P).

This link is not working, may be this one:
https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf

More practical is to include the erratum text with list of affected SoC
variants.

> "fsl,imx7d-i2c" already is documented in binding doc. This errata

s/errata/erratum

Errata is plural
Erratum is singular

> fix has been included in imx6_i2c_hwdata and it is the same in all
> I.MX6/7/8, so just reuse it.
> 

Please Fixes tag, this patch should go stable:
Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
Cc: stable@vger.kernel.org

> Signed-off-by: Carlos Song <carlos.song@nxp.com>
> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

With fixes in the commit message you can add my:
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>

> ---
> Change for V3:
> - No ACK, so resend this patch.
> Change for V2:
> - I have tried to fix this issue at imx7s.dtsi in V1, according to
>   the community suggestion, I make V2 patch for i2c-imx driver to
>   avoid updating the FDT to fix an errata. Discussion in V1:
>   Subject: [PATCH] ARM: dts: imx7s: change i2c compatible string for applying errata ERR007805
>   Message-ID: <20241021031148.2682015-1-carlos.song@nxp.com> (raw)
> ---
>  drivers/i2c/busses/i2c-imx.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 350346a7892c..9d5caa032c5c 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -335,6 +335,7 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
>  	{ .compatible = "fsl,imx6sll-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx6sx-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx6ul-i2c", .data = &imx6_i2c_hwdata, },
> +	{ .compatible = "fsl,imx7d-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx7s-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx8mm-i2c", .data = &imx6_i2c_hwdata, },
>  	{ .compatible = "fsl,imx8mn-i2c", .data = &imx6_i2c_hwdata, },
> -- 
> 2.34.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH v3] i2c: imx: add imx7d compatible string for applying errata ERR007805

[Carlos Song]

> -----Original Message-----
> From: Oleksij Rempel <o.rempel@pengutronix.de>
> Sent: Thursday, December 19, 2024 1:55 PM
> To: Carlos Song <carlos.song@nxp.com>
> Cc: andi.shyti@kernel.org; Frank Li <frank.li@nxp.com>;
> kernel@pengutronix.de; shawnguo@kernel.org; s.hauer@pengutronix.de;
> festevam@gmail.com; linux-i2c@vger.kernel.org; imx@lists.linux.dev;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; Bough
> Chen <haibo.chen@nxp.com>
> Subject: [EXT] Re: [PATCH v3] i2c: imx: add imx7d compatible string for applying
> errata ERR007805
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report this
> email' button
>
>
> On Wed, Dec 18, 2024 at 12:42:38PM +0800, Carlos Song wrote:
> > Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
>                                        do not exist?
> > compatible string table, at the result, "fsl,imx21-i2c" will be
> > matched, but it will cause errata ERR007805 not be applied in fact.
> >
> > So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
> > the errata
> > ERR007805(https://eur01.safelinks.protection.outlook.com/?url=https%3A
> > %2F%2Fwww.nxp.com%2Fwebapp%2FDownload%3FcolCode%3D&data=05%
> 7C02%7Ccarl
> >
> os.song%40nxp.com%7C958101ea901c4404272f08dd1ff1bb7f%7C686ea1d3bc2
> b4c6
> >
> fa92cd99c5c301635%7C0%7C0%7C638701845332883650%7CUnknown%7CTW
> FpbGZsb3d
> >
> 8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoi
> T
> >
> WFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=gLJgTRfX8KgwxAIm7GHP
> TKgbQx3
> > 4f6p2lyaRna0BD%2BU%3D&reserved=0
> > IMX7DS_2N09P).
>
> This link is not working, may be this one:
> https://www.nxp/
> .com%2Fdocs%2Fen%2Ferrata%2FIMX7DS_3N09P.pdf&data=05%7C02%7Ccarl
> os.song%40nxp.com%7C958101ea901c4404272f08dd1ff1bb7f%7C686ea1d3bc2
> b4c6fa92cd99c5c301635%7C0%7C0%7C638701845332903180%7CUnknown%7
> CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXa
> W4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=xhrAk7
> %2FVbIWyXGr9ltpprMNimJjAX%2BfFrxQ%2BUvj7wZs%3D&reserved=0
>
> More practical is to include the erratum text with list of affected SoC variants.
>
> > "fsl,imx7d-i2c" already is documented in binding doc. This errata
>
> s/errata/erratum
>
> Errata is plural
> Erratum is singular
>
> > fix has been included in imx6_i2c_hwdata and it is the same in all
> > I.MX6/7/8, so just reuse it.
> >
>
> Please Fixes tag, this patch should go stable:
> Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus
> frequency limit")
> Cc: stable@vger.kernel.org
>
> > Signed-off-by: Carlos Song <carlos.song@nxp.com>
> > Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
>
> With fixes in the commit message you can add my:
> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
>

Hi, I have remake the commit log referring to your comment.
Is this what you expected? If yes, please let me know. I will apply it at V4 and add your
Acked-by.

It will be this in V4:

    i2c: imx: add imx7d compatible string for applying erratum ERR007805

    Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
    compatible string table, at the result, "fsl,imx21-i2c" will be
    matched, but it will cause erratum ERR007805 not be applied in fact.

    So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
    the erratum ERR007805(https://www.nxp.com/docs/en/errata/IMX7DS_3N09P.pdf).

    "
    ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
    the SCL low period violates the I2C spec of 1.3 uS min

    Description: When the I2C module is programmed to operate at the
    maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
    clock low period violates the I2C spec of 1.3 uS min. The user must
    reduce the clock speed to obtain the SCL low time to meet the 1.3us
    I2C minimum required. This behavior means the SoC is not compliant
    to the I2C spec at 400kHz.

    Workaround: To meet the clock low period requirement in fast speed
    mode, SCL must be configured to 384KHz or less.
    "

    "fsl,imx7d-i2c" already is documented in binding doc. This erratum
    fix has been included in imx6_i2c_hwdata and it is the same in all
    I.MX6/7/8, so just reuse it.

    Fixes: 39c025721d70 ("i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit")
    Cc: stable@vger.kernel.org
    Signed-off-by: Carlos Song <carlos.song@nxp.com>
    Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

> > ---
> > Change for V3:
> > - No ACK, so resend this patch.
> > Change for V2:
> > - I have tried to fix this issue at imx7s.dtsi in V1, according to
> >   the community suggestion, I make V2 patch for i2c-imx driver to
> >   avoid updating the FDT to fix an errata. Discussion in V1:
> >   Subject: [PATCH] ARM: dts: imx7s: change i2c compatible string for
> applying errata ERR007805
> >   Message-ID: <20241021031148.2682015-1-carlos.song@nxp.com> (raw)
> > ---
> >  drivers/i2c/busses/i2c-imx.c | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/drivers/i2c/busses/i2c-imx.c
> > b/drivers/i2c/busses/i2c-imx.c index 350346a7892c..9d5caa032c5c 100644
> > --- a/drivers/i2c/busses/i2c-imx.c
> > +++ b/drivers/i2c/busses/i2c-imx.c
> > @@ -335,6 +335,7 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
> >       { .compatible = "fsl,imx6sll-i2c", .data = &imx6_i2c_hwdata, },
> >       { .compatible = "fsl,imx6sx-i2c", .data = &imx6_i2c_hwdata, },
> >       { .compatible = "fsl,imx6ul-i2c", .data = &imx6_i2c_hwdata, },
> > +     { .compatible = "fsl,imx7d-i2c", .data = &imx6_i2c_hwdata, },
> >       { .compatible = "fsl,imx7s-i2c", .data = &imx6_i2c_hwdata, },
> >       { .compatible = "fsl,imx8mm-i2c", .data = &imx6_i2c_hwdata, },
> >       { .compatible = "fsl,imx8mn-i2c", .data = &imx6_i2c_hwdata, },
> > --
> > 2.34.1
> >
> >
>
> --
> Pengutronix e.K.                           |
> |
> Steuerwalder Str. 21                       |
> http://www.pen/
> gutronix.de%2F&data=05%7C02%7Ccarlos.song%40nxp.com%7C958101ea901c
> 4404272f08dd1ff1bb7f%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7
> C638701845332917054%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOn
> RydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3
> D%3D%7C0%7C%7C%7C&sdata=Zc4%2BMIZBmbv7BsAELQk9jKNtmhMTGxcdT
> mytHTYdNag%3D&reserved=0  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0
> |
> Amtsgericht Hildesheim, HRA 2686           | Fax:
> +49-5121-206917-5555 |

Re: [PATCH v3] i2c: imx: add imx7d compatible string for applying errata ERR007805

[Andi Shyti]

Hi Carlos,

> It will be this in V4:

no need to send a v4.

Andi

Re: [PATCH v3] i2c: imx: add imx7d compatible string for applying errata ERR007805

[Andi Shyti]

Hi Carlos,

On Wed, Dec 18, 2024 at 12:42:38PM +0800, Carlos Song wrote:
> Compatible string "fsl,imx7d-i2c" is not exited at i2c-imx driver
> compatible string table, at the result, "fsl,imx21-i2c" will be
> matched, but it will cause errata ERR007805 not be applied in fact.
> 
> So Add "fsl,imx7d-i2c" compatible string in i2c-imx driver to apply
> the errata ERR007805(https://www.nxp.com/webapp/Download?colCode=
> IMX7DS_2N09P).
> 
> "fsl,imx7d-i2c" already is documented in binding doc. This errata
> fix has been included in imx6_i2c_hwdata and it is the same in all
> I.MX6/7/8, so just reuse it.
> 
> Signed-off-by: Carlos Song <carlos.song@nxp.com>
> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

with the commit log changes, merged to i2c/i2c-host-fixes.

Thanks,
Andi