linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Yeoreum Yun <yeoreum.yun@arm.com>
To: Mike Leach <mike.leach@linaro.org>
Cc: suzuki.poulose@arm.com, james.clark@linaro.org,
	alexander.shishkin@linux.intel.com, bigeasy@linutronix.de,
	clrkwllms@kernel.org, rostedt@goodmis.org,
	coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rt-devel@lists.linux.dev
Subject: Re: [PATCH v3 0/9] coresight: change some driver' spinlock type to raw_spinlock_t
Date: Fri, 20 Dec 2024 10:06:27 +0000	[thread overview]
Message-ID: <Z2VBoxu/pAnkiWMh@e129823.arm.com> (raw)
In-Reply-To: <CAJ9a7VhxG_8R6j5uRCzOhLpy4ZmzyVvyW0+ryCcd4w7wqpZ2ew@mail.gmail.com>

Hi Mike,

> Hi,
>
> On Mon, 16 Dec 2024 at 11:50, Yeoreum Yun <yeoreum.yun@arm.com> wrote:
> >
> > In some coresight drivers, drvdata->spinlock can be held during __schedule()
> > by perf_event_task_sched_out()/in().
> >
> > Since drvdata->spinlock type is spinlock_t and
> > perf_event_task_sched_out()/in() is called after acquiring rq_lock,
> > which is raw_spinlock_t (an unsleepable lock),
> > this poses an issue in PREEMPT_RT kernel where spinlock_t is sleepable.
> >
> > To address this,change type drvdata->spinlock in some coresight drivers,
> > which can be called by perf_event_task_sched_out()/in(),
> > from spinlock_t to raw_spinlock_t.
> >
> > Reviewed-by: James Clark <james.clark@linaro.org>
> >
> > v2 to v3:
> >     - Fix build error
> >
> > v1 to v2:
> >     - seperate patchsets to change locktype and apply gurad API.
> >
> > Yeoreum Yun (9):
> >   coresight: change coresight_device lock type to  raw_spinlock_t
> >   coresight-etm4x: change etmv4_drvdata spinlock type to  raw_spinlock_t
> >   coresight: change coresight_trace_id_map's lock type to
> >     raw_spinlock_t
> >   coresight-cti: change cti_drvdata spinlock's type to raw_spinlock_t
> >   coresight-etb10: change etb_drvdata spinlock's type to raw_spinlock_t
> >   coresight-funnel: change funnel_drvdata spinlock's type to
> >     raw_spinlock_t
> >   coresight-replicator: change replicator_drvdata spinlock's type to
> >     raw_spinlock_t
> >   coresight-tmc: change tmc_drvdata spinlock's type to raw_spinlock_t
> >   coresight/ultrasoc: change cti_drvdata spinlock's type to
> >     raw_spinlock_t
> >
> >  .../hwtracing/coresight/coresight-config.c    |   8 +-
> >  .../hwtracing/coresight/coresight-config.h    |   2 +-
> >  drivers/hwtracing/coresight/coresight-core.c  |   2 +-
> >  .../hwtracing/coresight/coresight-cti-core.c  |  44 +--
> >  .../hwtracing/coresight/coresight-cti-sysfs.c |  76 +++---
> >  drivers/hwtracing/coresight/coresight-cti.h   |   2 +-
> >  drivers/hwtracing/coresight/coresight-etb10.c |  26 +-
> >  .../coresight/coresight-etm4x-core.c          |  18 +-
> >  .../coresight/coresight-etm4x-sysfs.c         | 250 +++++++++---------
> >  drivers/hwtracing/coresight/coresight-etm4x.h |   2 +-
> >  .../hwtracing/coresight/coresight-funnel.c    |  12 +-
> >  .../coresight/coresight-replicator.c          |  12 +-
> >  .../hwtracing/coresight/coresight-syscfg.c    |  26 +-
> >  .../hwtracing/coresight/coresight-tmc-core.c  |   6 +-
> >  .../hwtracing/coresight/coresight-tmc-etf.c   |  48 ++--
> >  .../hwtracing/coresight/coresight-tmc-etr.c   |  40 +--
> >  drivers/hwtracing/coresight/coresight-tmc.h   |   2 +-
> >  .../hwtracing/coresight/coresight-trace-id.c  |  22 +-
> >  drivers/hwtracing/coresight/ultrasoc-smb.c    |  12 +-
> >  drivers/hwtracing/coresight/ultrasoc-smb.h    |   2 +-
> >  include/linux/coresight.h                     |   4 +-
> >  21 files changed, 308 insertions(+), 308 deletions(-)
> >
> > --
> > LEVI:{C3F47F37-75D8-414A-A8BA-3980EC8A46D7}
> >
>
> Notably missing is the same changes for the etm3x driver. The ETMv3.x
> and PTM1.x are supported by this driver, and these trace source
> variants are also supported in perf in the cs_etm.c code.
>
> STM is also missing, though this is not directly enabled via perf -
> but could perhaps run concurrently as it can be a target output for
> ftrace.
>
> Regards

Thanks for review. okay I'll back with new patch set including etm3 /
stm.

Thanks!

> --
> Mike Leach
> Principal Engineer, ARM Ltd.
> Manchester Design Centre. UK


  reply	other threads:[~2024-12-20 10:18 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-16 11:49 [PATCH v3 0/9] coresight: change some driver' spinlock type to raw_spinlock_t Yeoreum Yun
2024-12-16 11:49 ` [PATCH v3 1/9] coresight: change coresight_device lock " Yeoreum Yun
2024-12-19 12:23   ` Mike Leach
2024-12-16 11:49 ` [PATCH v3 2/9] coresight-etm4x: change etmv4_drvdata spinlock " Yeoreum Yun
2024-12-19 12:24   ` Mike Leach
2024-12-20 10:13     ` Yeoreum Yun
2024-12-16 11:50 ` [PATCH v3 3/9] coresight: change coresight_trace_id_map's lock " Yeoreum Yun
2024-12-19 12:24   ` Mike Leach
2024-12-16 11:50 ` [PATCH v3 4/9] coresight-cti: change cti_drvdata spinlock's " Yeoreum Yun
2024-12-19 12:24   ` Mike Leach
2024-12-16 11:50 ` [PATCH v3 5/9] coresight-etb10: change etb_drvdata " Yeoreum Yun
2024-12-19 12:24   ` Mike Leach
2024-12-16 11:50 ` [PATCH v3 6/9] coresight-funnel: change funnel_drvdata " Yeoreum Yun
2024-12-19 12:24   ` Mike Leach
2024-12-16 11:50 ` [PATCH v3 7/9] coresight-replicator: change replicator_drvdata " Yeoreum Yun
2024-12-19 12:24   ` Mike Leach
2024-12-16 11:50 ` [PATCH v3 8/9] coresight-tmc: change tmc_drvdata " Yeoreum Yun
2024-12-19 12:23   ` Mike Leach
2024-12-16 11:50 ` [PATCH v3 9/9] coresight/ultrasoc: change cti_drvdata " Yeoreum Yun
2024-12-19 12:24   ` Mike Leach
2024-12-20 10:07     ` Yeoreum Yun
2024-12-19 12:27 ` [PATCH v3 0/9] coresight: change some driver' spinlock " Mike Leach
2024-12-20 10:06   ` Yeoreum Yun [this message]
2024-12-20 10:38   ` Yeoreum Yun
2024-12-20 11:35     ` Suzuki K Poulose
2024-12-20 11:39       ` Yeoreum Yun
2024-12-20 11:48         ` Suzuki K Poulose
2024-12-20 11:50           ` Yeoreum Yun
2024-12-21 17:02           ` Yeoreum Yun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z2VBoxu/pAnkiWMh@e129823.arm.com \
    --to=yeoreum.yun@arm.com \
    --cc=alexander.shishkin@linux.intel.com \
    --cc=bigeasy@linutronix.de \
    --cc=clrkwllms@kernel.org \
    --cc=coresight@lists.linaro.org \
    --cc=james.clark@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rt-devel@lists.linux.dev \
    --cc=mike.leach@linaro.org \
    --cc=rostedt@goodmis.org \
    --cc=suzuki.poulose@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).