Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<imx@lists.linux.dev>,
	"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
	<linux-arm-kernel@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes
Date: Mon, 6 Jan 2025 14:33:30 -0500	[thread overview]
Message-ID: <Z3wwChng4CcJi8On@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <Z3wvWXVnuPQPTw7u@lizhi-Precision-Tower-5810>

On Mon, Jan 06, 2025 at 02:30:33PM -0500, Frank Li wrote:
> On Mon, Oct 28, 2024 at 06:03:18PM -0400, Frank Li wrote:
> > Add audio-codec cs42888, enable esai0 and asrc0.
> >
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
>
> Shawn:
>
> 	Any comments for this patches?

Sorry, I ping at old thread, v2 should be

https://lore.kernel.org/imx/Z3wvqEupL6TxCqct@lizhi-Precision-Tower-5810/T/#t

Frank

>
> Frank
>
> >  arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 82 ++++++++++++++++++++
> >  1 file changed, 82 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> > index e983633a4bb31..31cf02275ca9e 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> > @@ -134,6 +134,13 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
> >  		enable-active-high;
> >  	};
> >
> > +	reg_audio: regulator-audio {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "cs42888_supply";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +	};
> > +
> >  	reg_fec2_supply: regulator-fec2-nvcc {
> >  		compatible = "regulator-fixed";
> >  		regulator-name = "fec2_nvcc";
> > @@ -223,6 +230,27 @@ simple-audio-card,codec {
> >  		};
> >  	};
> >
> > +	sound-cs42888 {
> > +		compatible = "fsl,imx-audio-cs42888";
> > +		model = "imx-cs42888";
> > +		audio-cpu = <&esai0>;
> > +		audio-codec = <&cs42888>;
> > +		audio-asrc = <&asrc0>;
> > +		audio-routing = "Line Out Jack", "AOUT1L",
> > +				"Line Out Jack", "AOUT1R",
> > +				"Line Out Jack", "AOUT2L",
> > +				"Line Out Jack", "AOUT2R",
> > +				"Line Out Jack", "AOUT3L",
> > +				"Line Out Jack", "AOUT3R",
> > +				"Line Out Jack", "AOUT4L",
> > +				"Line Out Jack", "AOUT4R",
> > +				"AIN1L", "Line In Jack",
> > +				"AIN1R", "Line In Jack",
> > +				"AIN2L", "Line In Jack",
> > +				"AIN2R", "Line In Jack";
> > +		status = "okay";
> > +	};
> > +
> >  	sound-wm8960 {
> >  		compatible = "fsl,imx-audio-wm8960";
> >  		model = "wm8960-audio";
> > @@ -301,12 +329,45 @@ pca6416: gpio@20 {
> >  		gpio-controller;
> >  		#gpio-cells = <2>;
> >  	};
> > +
> > +	cs42888: audio-codec@48 {
> > +		compatible = "cirrus,cs42888";
> > +		reg = <0x48>;
> > +		clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
> > +		clock-names = "mclk";
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_cs42888_reset>;
> > +		VA-supply = <&reg_audio>;
> > +		VD-supply = <&reg_audio>;
> > +		VLS-supply = <&reg_audio>;
> > +		VLC-supply = <&reg_audio>;
> > +		reset-gpios = <&lsio_gpio4 25 GPIO_ACTIVE_LOW>;
> > +		assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> > +				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> > +				  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> > +				  <&mclkout0_lpcg IMX_LPCG_CLK_0>;
> > +		assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
> > +		status = "okay";
> > +	};
> >  };
> >
> >  &cm41_intmux {
> >  	status = "okay";
> >  };
> >
> > +&esai0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_esai0>;
> > +	assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
> > +			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> > +			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> > +			  <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> > +			  <&esai0_lpcg IMX_LPCG_CLK_4>;
> > +	assigned-clock-parents = <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>;
> > +	assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
> > +	status = "okay";
> > +};
> > +
> >  &hsio_phy {
> >  	fsl,hsio-cfg = "pciea-pcieb-sata";
> >  	fsl,refclk-pad-mode = "input";
> > @@ -691,6 +752,12 @@ IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31			0x0600004c
> >  		>;
> >  	};
> >
> > +	pinctrl_cs42888_reset: cs42888_resetgrp {
> > +		fsl,pins = <
> > +			IMX8QM_QSPI1A_DATA1_LSIO_GPIO4_IO25			0x0600004c
> > +		>;
> > +	};
> > +
> >  	pinctrl_i2c0: i2c0grp {
> >  		fsl,pins = <
> >  			IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL			0x06000021
> > @@ -725,6 +792,21 @@ IMX8QM_M41_I2C0_SCL_M41_I2C0_SCL			0x0600004c
> >  		>;
> >  	};
> >
> > +	pinctrl_esai0: esai0grp {
> > +		fsl,pins = <
> > +			IMX8QM_ESAI0_FSR_AUD_ESAI0_FSR				0xc6000040
> > +			IMX8QM_ESAI0_FST_AUD_ESAI0_FST				0xc6000040
> > +			IMX8QM_ESAI0_SCKR_AUD_ESAI0_SCKR			0xc6000040
> > +			IMX8QM_ESAI0_SCKT_AUD_ESAI0_SCKT			0xc6000040
> > +			IMX8QM_ESAI0_TX0_AUD_ESAI0_TX0				0xc6000040
> > +			IMX8QM_ESAI0_TX1_AUD_ESAI0_TX1				0xc6000040
> > +			IMX8QM_ESAI0_TX2_RX3_AUD_ESAI0_TX2_RX3			0xc6000040
> > +			IMX8QM_ESAI0_TX3_RX2_AUD_ESAI0_TX3_RX2			0xc6000040
> > +			IMX8QM_ESAI0_TX4_RX1_AUD_ESAI0_TX4_RX1			0xc6000040
> > +			IMX8QM_ESAI0_TX5_RX0_AUD_ESAI0_TX5_RX0			0xc6000040
> > +		>;
> > +	};
> > +
> >  	pinctrl_fec1: fec1grp {
> >  		fsl,pins = <
> >  			IMX8QM_ENET0_MDC_CONN_ENET0_MDC				0x06000020
> > --
> > 2.34.1
> >


      reply	other threads:[~2025-01-06 19:35 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-28 22:03 [PATCH 1/1] arm64: dts: imx8qm-mek: add audio-codec cs42888 and related nodes Frank Li
2024-10-29  0:21 ` Francesco Dolcini
2025-01-06 19:30 ` Frank Li
2025-01-06 19:33   ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Z3wwChng4CcJi8On@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox