Re: [RFC v2 PATCH 04/10] net: ti: prueth: Adds link detection, RX and TX support.

[Joe Damato <jdamato@fastly.com>]

On Fri, Jan 24, 2025 at 07:10:50PM +0530, Basharath Hussain Khaja wrote:
> From: Roger Quadros <rogerq@ti.com>
> 
> Changes corresponding to link configuration such as speed and duplexity.
> IRQ and handler initializations are performed for packet reception.Firmware
> receives the packet from the wire and stores it into OCMC queue. Next, it
> notifies the CPU via interrupt. Upon receiving the interrupt CPU will
> service the IRQ and packet will be processed by pushing the newly allocated
> SKB to upper layers.
> 
> When the user application want to transmit a packet, it will invoke
> sys_send() which will inturn invoke the PRUETH driver, then it will write
> the packet into OCMC queues. PRU firmware will pick up the packet and
> transmit it on to the wire.
> 
> Signed-off-by: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> Signed-off-by: Parvathi Pudi <parvathi@couthit.com>
> Signed-off-by: Basharath Hussain Khaja <basharath@couthit.com>
> ---
>  drivers/net/ethernet/ti/icssm/icssm_prueth.c | 599 ++++++++++++++++++-
>  drivers/net/ethernet/ti/icssm/icssm_prueth.h |  46 ++
>  2 files changed, 640 insertions(+), 5 deletions(-)

Looks like this patch was duplicated and posted twice ?