[PATCH v2] usb: phy: mxs: silence EPROBE_DEFER error on boot

[PATCH v2] usb: phy: mxs: silence EPROBE_DEFER error on boot

[Dominique Martinet]

Use dev_err_probe to silence EPROBE_DEFER error on boot on i.MX8ULP:
[    0.127301] mxs_phy 29910000.usb-phy: can't get the clock, err=-517

Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
---
Changes in v2:
- removed redundant error message and now useless braces, thank you for
  the quick feedback!
- adjusted message alignment (that was also bugging me...)
- Link to v1: https://lore.kernel.org/r/20250203-defer_usb2-v1-1-2366f26462e0@atmark-techno.com
---
 drivers/usb/phy/phy-mxs-usb.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 7490f1798b461c39c29bb74e1e57e0a4adce2bd7..39b75199d11c6f9ec21174c20d0465cb79c133fb 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -769,11 +769,9 @@ static int mxs_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(base);
 
 	clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev,
-			"can't get the clock, err=%ld", PTR_ERR(clk));
-		return PTR_ERR(clk);
-	}
+	if (IS_ERR(clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk),
+				     "can't get the clock");
 
 	mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
 	if (!mxs_phy)

---
base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b
change-id: 20250203-defer_usb2-ee26f66a01ad

Best regards,
-- 
Dominique Martinet <dominique.martinet@atmark-techno.com>

Re: [PATCH v2] usb: phy: mxs: silence EPROBE_DEFER error on boot

[Dominique Martinet]

Dominique Martinet wrote on Mon, Feb 03, 2025 at 03:32:05PM +0900:
> Use dev_err_probe to silence EPROBE_DEFER error on boot on i.MX8ULP:
> [    0.127301] mxs_phy 29910000.usb-phy: can't get the clock, err=-517
> 
> Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
> ---
> Changes in v2:
> - removed redundant error message and now useless braces, thank you for
>   the quick feedback!
> - adjusted message alignment (that was also bugging me...)
> - Link to v1: https://lore.kernel.org/r/20250203-defer_usb2-v1-1-2366f26462e0@atmark-techno.com
> ---
>  drivers/usb/phy/phy-mxs-usb.c | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
> index 7490f1798b461c39c29bb74e1e57e0a4adce2bd7..39b75199d11c6f9ec21174c20d0465cb79c133fb 100644
> --- a/drivers/usb/phy/phy-mxs-usb.c
> +++ b/drivers/usb/phy/phy-mxs-usb.c
> @@ -769,11 +769,9 @@ static int mxs_phy_probe(struct platform_device *pdev)
>  		return PTR_ERR(base);
>  
>  	clk = devm_clk_get(&pdev->dev, NULL);
> -	if (IS_ERR(clk)) {
> -		dev_err(&pdev->dev,
> -			"can't get the clock, err=%ld", PTR_ERR(clk));
> -		return PTR_ERR(clk);
> -	}
> +	if (IS_ERR(clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(clk),
> +				     "can't get the clock");

Looking at the usb251xb patch also made me notice this is missing a
trailing newline, but I'm surprised because it "worked fine" (I don't
see garbage at the end of the line in my dmesg with the old 517 error)

There's no other missing \n in this file though so I guess I'll just
send a v3 in doubt, but I'm now curious if it really is needed and
couldn't find anything about that.

Anyway, sorry for the spam, and thanks for the quick review earlier!
-- 
Dominique