Re: [PATCH v5 03/11] media: dt-bindings: media: add bindings for rockchip rk3568 vicap

[Sakari Ailus <sakari.ailus@linux.intel.com>]

Hi Krzysztof, Michael,

On Fri, Mar 07, 2025 at 08:51:54AM +0100, Krzysztof Kozlowski wrote:
> On Thu, Mar 06, 2025 at 05:56:04PM +0100, Michael Riesch wrote:
> > Add documentation for the Rockchip RK3568 Video Capture (VICAP) unit.
> > 
> > Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
> 
> subject: only one media prefix, the first
> 
> A nit, subject: drop second/last, redundant "bindings". The
> "dt-bindings" prefix is already stating that these are bindings.
> See also:
> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
> 
> > ---
> >  .../bindings/media/rockchip,rk3568-vicap.yaml      | 169 +++++++++++++++++++++
> >  MAINTAINERS                                        |   1 +
> >  2 files changed, 170 insertions(+)
> > 
> 
> ...
> 
> > +  clocks:
> > +    items:
> > +      - description: ACLK
> > +      - description: HCLK
> > +      - description: DCLK
> > +      - description: ICLK
> > +
> > +  clock-names:
> > +    items:
> > +      - const: aclk
> > +      - const: hclk
> > +      - const: dclk
> > +      - const: iclk
> > +
> > +  rockchip,cif-clk-delaynum:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    minimum: 0
> > +    maximum: 127
> > +    description:
> > +      Delay the DVP path clock input to align the sampling phase, only valid
> > +      in dual edge sampling mode. Delay is zero by default and can be adjusted
> > +      optionally.
> 
> default: 0

And this is technically specific to the DVP port (0). Should (or could?) it
be located there?

> 
> > +
> > +  iommus:
> > +    maxItems: 1
> > +
> > +  resets:
> > +    items:
> > +      - description: ARST
> > +      - description: HRST
> > +      - description: DRST
> > +      - description: PRST
> > +      - description: IRST
> > +
> > +  reset-names:
> > +    items:
> > +      - const: arst
> > +      - const: hrst
> > +      - const: drst
> > +      - const: prst
> > +      - const: irst
> > +
> > +  rockchip,grf:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description: Phandle to general register file used for video input block control.
> > +
> > +  power-domains:
> > +    maxItems: 1
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port@0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: The digital video port (DVP, a parallel video interface).
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              bus-type:
> > +                enum: [5, 6]
> > +
> > +            required:
> > +              - bus-type
> > +
> > +      port@1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: Internal port connected to a MIPI CSI-2 host.
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> 
> Hm, does it actually work? graph/port does not allow any other
> properties. You should use graph/port-base and probably still narrow
> lanes for both of port@0 and port@1.

I'd list the relevant properties for both DVP and CSI-2, either as
mandatory or with defaults (could be reasonable for DVP signal polarities
but not e.g. on number of CSI-2 lanes).

> 
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - clocks
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/rk3568-cru.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/power/rk3568-power.h>
> > +    #include <dt-bindings/media/video-interfaces.h>
> > +
> > +    parent {
> 
> soc {
> 
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> 
> Best regards,
> Krzysztof
> 

-- 
Kind regards,

Sakari Ailus