[PATCH 1/7] dt-bindings: net: dsa: mediatek,mt7530: correct brand name

[PATCH 1/7] dt-bindings: net: dsa: mediatek,mt7530: correct brand name

[arinc9.unal]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

The brand name is MediaTek, change it to that.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index e532c6b795f4..6df995478275 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Mediatek MT7530 and MT7531 Ethernet Switches
+title: MediaTek MT7530 and MT7531 Ethernet Switches
 
 maintainers:
   - Arınç ÜNAL <arinc.unal@arinc9.com>
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/7] dt-bindings: net: dsa: mediatek,mt7530: improve MCM and MT7988 information

[arinc9.unal]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

Improve the description of the schema.

The MT7620 SoCs described are not part of the multi-chip module but rather
built into the SoC. Mention the MT7530 MMIO driver not supporting them.

Move information for the switch on the MT7988 SoC below MT7531, and improve
it.

List maintainers in alphabetical order by first name.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../bindings/net/dsa/mediatek,mt7530.yaml     | 25 ++++++++++---------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 6df995478275..7045a98d9593 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -8,29 +8,30 @@ title: MediaTek MT7530 and MT7531 Ethernet Switches
 
 maintainers:
   - Arınç ÜNAL <arinc.unal@arinc9.com>
+  - Daniel Golle <daniel@makrotopia.org>
   - Landen Chao <Landen.Chao@mediatek.com>
   - DENG Qingfang <dqfext@gmail.com>
   - Sean Wang <sean.wang@mediatek.com>
-  - Daniel Golle <daniel@makrotopia.org>
 
 description: |
-  There are three versions of MT7530, standalone, in a multi-chip module and
-  built-into a SoC.
+  There are three versions of MT7530, standalone, in a multi-chip module, and
+  built into an SoC.
 
-  MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
-  MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
-
-  The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
-  Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
-  memory map rather than using MDIO. The switch got an internally connected 10G
-  CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
+  MT7530 is a part of the multi-chip module in MT7621AT, MT7621DAT, MT7621ST and
+  MT7623AI SoCs.
 
   MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
-  and the switch registers are directly mapped into SoC's memory map rather than
-  using MDIO. The DSA driver currently doesn't support MT7620 variants.
+  and the switch registers are directly mapped into the SoC's memory map rather
+  than using MDIO. The MT7530 MMIO driver currently doesn't support these SoCs.
 
   There is only the standalone version of MT7531.
 
+  The MT7988 SoC comes with a built-in switch with four Gigabit Ethernet PHYs.
+  The characteristics of the switch is similar to MT7531. The switch registers
+  are directly mapped into the SoC's memory map rather than using MDIO. The
+  switch has got an internally connected 10G CPU port and 4 user ports connected
+  to the built-in Gigabit Ethernet PHYs.
+
   Port 5 on MT7530 has got various ways of configuration:
 
     - Port 5 can be used as a CPU port.
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/7] dt-bindings: net: dsa: mediatek,mt7530: improve MCM and MT7988 information

[Daniel Golle]

On Thu, Apr 06, 2023 at 11:01:36AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> Improve the description of the schema.
> 
> The MT7620 SoCs described are not part of the multi-chip module but rather
> built into the SoC. Mention the MT7530 MMIO driver not supporting them.
> 
> Move information for the switch on the MT7988 SoC below MT7531, and improve
> it.
> 
> List maintainers in alphabetical order by first name.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  .../bindings/net/dsa/mediatek,mt7530.yaml     | 25 ++++++++++---------
>  1 file changed, 13 insertions(+), 12 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 6df995478275..7045a98d9593 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -8,29 +8,30 @@ title: MediaTek MT7530 and MT7531 Ethernet Switches
>  
>  maintainers:
>    - Arınç ÜNAL <arinc.unal@arinc9.com>
> +  - Daniel Golle <daniel@makrotopia.org>
>    - Landen Chao <Landen.Chao@mediatek.com>
>    - DENG Qingfang <dqfext@gmail.com>
>    - Sean Wang <sean.wang@mediatek.com>
> -  - Daniel Golle <daniel@makrotopia.org>
>  
>  description: |
> -  There are three versions of MT7530, standalone, in a multi-chip module and
> -  built-into a SoC.
> +  There are three versions of MT7530, standalone, in a multi-chip module, and
> +  built into an SoC.
>  
> -  MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
> -  MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
> -
> -  The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
> -  Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
> -  memory map rather than using MDIO. The switch got an internally connected 10G
> -  CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
> +  MT7530 is a part of the multi-chip module in MT7621AT, MT7621DAT, MT7621ST and
> +  MT7623AI SoCs.
>  
>    MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
> -  and the switch registers are directly mapped into SoC's memory map rather than
> -  using MDIO. The DSA driver currently doesn't support MT7620 variants.
> +  and the switch registers are directly mapped into the SoC's memory map rather
> +  than using MDIO. The MT7530 MMIO driver currently doesn't support these SoCs.
>  
>    There is only the standalone version of MT7531.
>  
> +  The MT7988 SoC comes with a built-in switch with four Gigabit Ethernet PHYs.
> +  The characteristics of the switch is similar to MT7531. The switch registers
> +  are directly mapped into the SoC's memory map rather than using MDIO. The
> +  switch has got an internally connected 10G CPU port and 4 user ports connected
> +  to the built-in Gigabit Ethernet PHYs.
> +
>    Port 5 on MT7530 has got various ways of configuration:
>  
>      - Port 5 can be used as a CPU port.
> -- 
> 2.37.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/7] dt-bindings: net: dsa: mediatek,mt7530: improve MCM and MT7988 information

[Krzysztof Kozlowski]

On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> Improve the description of the schema.
> 
> The MT7620 SoCs described are not part of the multi-chip module but rather
> built into the SoC. Mention the MT7530 MMIO driver not supporting them.
> 
> Move information for the switch on the MT7988 SoC below MT7531, and improve
> it.
> 
> List maintainers in alphabetical order by first name.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[arinc9.unal]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
to be used is internal. Add this.

Some bindings are incorrect for this switch now, so move them to more
specific places.

Address the incorrect information of which ports can be used as a user
port. Any port can be used as a user port.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
 1 file changed, 46 insertions(+), 17 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 7045a98d9593..605888ce2bc6 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -160,22 +160,6 @@ patternProperties:
       "^(ethernet-)?port@[0-9]+$":
         type: object
 
-        properties:
-          reg:
-            description:
-              Port address described must be 5 or 6 for CPU port and from 0 to 5
-              for user ports.
-
-        allOf:
-          - if:
-              required: [ ethernet ]
-            then:
-              properties:
-                reg:
-                  enum:
-                    - 5
-                    - 6
-
 required:
   - compatible
   - reg
@@ -186,9 +170,21 @@ $defs:
       "^(ethernet-)?ports$":
         patternProperties:
           "^(ethernet-)?port@[0-9]+$":
+            properties:
+              reg:
+                description:
+                  Port address described must be 5 or 6 for the CPU port. User
+                  ports can be 0 to 6.
+
             if:
               required: [ ethernet ]
             then:
+              properties:
+                reg:
+                  enum:
+                    - 5
+                    - 6
+
               if:
                 properties:
                   reg:
@@ -212,9 +208,21 @@ $defs:
       "^(ethernet-)?ports$":
         patternProperties:
           "^(ethernet-)?port@[0-9]+$":
+            properties:
+              reg:
+                description:
+                  Port address described must be 5 or 6 for the CPU port. User
+                  ports can be 0 to 6.
+
             if:
               required: [ ethernet ]
             then:
+              properties:
+                reg:
+                  enum:
+                    - 5
+                    - 6
+
               if:
                 properties:
                   reg:
@@ -235,6 +243,27 @@ $defs:
                       - 2500base-x
                       - sgmii
 
+  mt7988-dsa-port:
+    patternProperties:
+      "^(ethernet-)?ports$":
+        patternProperties:
+          "^(ethernet-)?port@[0-9]+$":
+            properties:
+              reg:
+                description:
+                  Port address described must be 6 for the CPU port. User ports
+                  can be 0 to 3, and 6.
+
+            if:
+              required: [ ethernet ]
+            then:
+              properties:
+                reg:
+                  const: 6
+
+                phy-mode:
+                  const: internal
+
 allOf:
   - $ref: dsa.yaml#/$defs/ethernet-ports
   - if:
@@ -285,7 +314,7 @@ allOf:
         compatible:
           const: mediatek,mt7988-switch
     then:
-      $ref: "#/$defs/mt7530-dsa-port"
+      $ref: "#/$defs/mt7988-dsa-port"
       properties:
         gpio-controller: false
         mediatek,mcm: false
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Daniel Golle]

On Thu, Apr 06, 2023 at 11:01:37AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
> to be used is internal. Add this.
> 
> Some bindings are incorrect for this switch now, so move them to more
> specific places.
> 
> Address the incorrect information of which ports can be used as a user
> port. Any port can be used as a user port.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>  1 file changed, 46 insertions(+), 17 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 7045a98d9593..605888ce2bc6 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -160,22 +160,6 @@ patternProperties:
>        "^(ethernet-)?port@[0-9]+$":
>          type: object
>  
> -        properties:
> -          reg:
> -            description:
> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
> -              for user ports.
> -
> -        allOf:
> -          - if:
> -              required: [ ethernet ]
> -            then:
> -              properties:
> -                reg:
> -                  enum:
> -                    - 5
> -                    - 6
> -
>  required:
>    - compatible
>    - reg
> @@ -186,9 +170,21 @@ $defs:
>        "^(ethernet-)?ports$":
>          patternProperties:
>            "^(ethernet-)?port@[0-9]+$":
> +            properties:
> +              reg:
> +                description:
> +                  Port address described must be 5 or 6 for the CPU port. User
> +                  ports can be 0 to 6.
> +
>              if:
>                required: [ ethernet ]
>              then:
> +              properties:
> +                reg:
> +                  enum:
> +                    - 5
> +                    - 6
> +
>                if:
>                  properties:
>                    reg:
> @@ -212,9 +208,21 @@ $defs:
>        "^(ethernet-)?ports$":
>          patternProperties:
>            "^(ethernet-)?port@[0-9]+$":
> +            properties:
> +              reg:
> +                description:
> +                  Port address described must be 5 or 6 for the CPU port. User
> +                  ports can be 0 to 6.
> +
>              if:
>                required: [ ethernet ]
>              then:
> +              properties:
> +                reg:
> +                  enum:
> +                    - 5
> +                    - 6
> +
>                if:
>                  properties:
>                    reg:
> @@ -235,6 +243,27 @@ $defs:
>                        - 2500base-x
>                        - sgmii
>  
> +  mt7988-dsa-port:
> +    patternProperties:
> +      "^(ethernet-)?ports$":
> +        patternProperties:
> +          "^(ethernet-)?port@[0-9]+$":
> +            properties:
> +              reg:
> +                description:
> +                  Port address described must be 6 for the CPU port. User ports
> +                  can be 0 to 3, and 6.
> +
> +            if:
> +              required: [ ethernet ]
> +            then:
> +              properties:
> +                reg:
> +                  const: 6
> +
> +                phy-mode:
> +                  const: internal
> +
>  allOf:
>    - $ref: dsa.yaml#/$defs/ethernet-ports
>    - if:
> @@ -285,7 +314,7 @@ allOf:
>          compatible:
>            const: mediatek,mt7988-switch
>      then:
> -      $ref: "#/$defs/mt7530-dsa-port"
> +      $ref: "#/$defs/mt7988-dsa-port"
>        properties:
>          gpio-controller: false
>          mediatek,mcm: false
> -- 
> 2.37.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Krzysztof Kozlowski]

On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
> to be used is internal. Add this.
> 
> Some bindings are incorrect for this switch now, so move them to more
> specific places.
> 
> Address the incorrect information of which ports can be used as a user
> port. Any port can be used as a user port.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
>  .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>  1 file changed, 46 insertions(+), 17 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 7045a98d9593..605888ce2bc6 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -160,22 +160,6 @@ patternProperties:
>        "^(ethernet-)?port@[0-9]+$":
>          type: object
>  
> -        properties:
> -          reg:
> -            description:
> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
> -              for user ports.
> -
> -        allOf:
> -          - if:
> -              required: [ ethernet ]
> -            then:
> -              properties:
> -                reg:
> -                  enum:
> -                    - 5
> -                    - 6
> -

I have doubts that the binding is still maintainable/reviewable. First,
why do you need all above patterns after removal of entire contents?

Second, amount of if-then-if-then located in existing blocks (not
top-level) is quite big. I counted if-then-using defs, where defs has
patternProps-patternProps-if-then-if-then-properties.... OMG. :)

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Arınç ÜNAL]

On 6.04.2023 22:07, Krzysztof Kozlowski wrote:
> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>
>> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
>> to be used is internal. Add this.
>>
>> Some bindings are incorrect for this switch now, so move them to more
>> specific places.
>>
>> Address the incorrect information of which ports can be used as a user
>> port. Any port can be used as a user port.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>>   .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>>   1 file changed, 46 insertions(+), 17 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> index 7045a98d9593..605888ce2bc6 100644
>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> @@ -160,22 +160,6 @@ patternProperties:
>>         "^(ethernet-)?port@[0-9]+$":
>>           type: object
>>   
>> -        properties:
>> -          reg:
>> -            description:
>> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
>> -              for user ports.
>> -
>> -        allOf:
>> -          - if:
>> -              required: [ ethernet ]
>> -            then:
>> -              properties:
>> -                reg:
>> -                  enum:
>> -                    - 5
>> -                    - 6
>> -
> 
> I have doubts that the binding is still maintainable/reviewable. First,
> why do you need all above patterns after removal of entire contents?

The 'type: object' item is still globally used. I'd have to define that 
on each definitions, I suppose?

> 
> Second, amount of if-then-if-then located in existing blocks (not
> top-level) is quite big. I counted if-then-using defs, where defs has
> patternProps-patternProps-if-then-if-then-properties.... OMG. :)

Yup, not much to do if we want to keep the information. I'm still 
maintaining this though. ¯\_(ツ)_/¯

Arınç

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Krzysztof Kozlowski]

On 06/04/2023 21:18, Arınç ÜNAL wrote:
> On 6.04.2023 22:07, Krzysztof Kozlowski wrote:
>> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>
>>> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
>>> to be used is internal. Add this.
>>>
>>> Some bindings are incorrect for this switch now, so move them to more
>>> specific places.
>>>
>>> Address the incorrect information of which ports can be used as a user
>>> port. Any port can be used as a user port.
>>>
>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>> ---
>>>   .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>>>   1 file changed, 46 insertions(+), 17 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>> index 7045a98d9593..605888ce2bc6 100644
>>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>> @@ -160,22 +160,6 @@ patternProperties:
>>>         "^(ethernet-)?port@[0-9]+$":
>>>           type: object
>>>   
>>> -        properties:
>>> -          reg:
>>> -            description:
>>> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
>>> -              for user ports.
>>> -
>>> -        allOf:
>>> -          - if:
>>> -              required: [ ethernet ]
>>> -            then:
>>> -              properties:
>>> -                reg:
>>> -                  enum:
>>> -                    - 5
>>> -                    - 6
>>> -
>>
>> I have doubts that the binding is still maintainable/reviewable. First,
>> why do you need all above patterns after removal of entire contents?
> 
> The 'type: object' item is still globally used. I'd have to define that 
> on each definitions, I suppose?

Doesn't it come from dsa.yaml/dsa-port.yaml schema?

> 
>>
>> Second, amount of if-then-if-then located in existing blocks (not
>> top-level) is quite big. I counted if-then-using defs, where defs has
>> patternProps-patternProps-if-then-if-then-properties.... OMG. :)
> 
> Yup, not much to do if we want to keep the information. I'm still 
> maintaining this though. ¯\_(ツ)_/¯

Maybe it should be split into few bindings sharing common part.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Arınç ÜNAL]

On 7.04.2023 12:07, Krzysztof Kozlowski wrote:
> On 06/04/2023 21:18, Arınç ÜNAL wrote:
>> On 6.04.2023 22:07, Krzysztof Kozlowski wrote:
>>> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>>>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>>
>>>> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
>>>> to be used is internal. Add this.
>>>>
>>>> Some bindings are incorrect for this switch now, so move them to more
>>>> specific places.
>>>>
>>>> Address the incorrect information of which ports can be used as a user
>>>> port. Any port can be used as a user port.
>>>>
>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>> ---
>>>>    .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>>>>    1 file changed, 46 insertions(+), 17 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>> index 7045a98d9593..605888ce2bc6 100644
>>>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>> @@ -160,22 +160,6 @@ patternProperties:
>>>>          "^(ethernet-)?port@[0-9]+$":
>>>>            type: object
>>>>    
>>>> -        properties:
>>>> -          reg:
>>>> -            description:
>>>> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
>>>> -              for user ports.
>>>> -
>>>> -        allOf:
>>>> -          - if:
>>>> -              required: [ ethernet ]
>>>> -            then:
>>>> -              properties:
>>>> -                reg:
>>>> -                  enum:
>>>> -                    - 5
>>>> -                    - 6
>>>> -
>>>
>>> I have doubts that the binding is still maintainable/reviewable. First,
>>> why do you need all above patterns after removal of entire contents?
>>
>> The 'type: object' item is still globally used. I'd have to define that
>> on each definitions, I suppose?
> 
> Doesn't it come from dsa.yaml/dsa-port.yaml schema?

It comes from dsa.yaml#/$defs/ethernet-ports which this schema already 
refers to. I'll remove the patterns above.

Though 'type: object' is not there for "^(ethernet-)?port@[0-9]+$". I 
think I should add it there as the dsa-port.yaml schema defines the 
properties of the DSA switch port object. So the value matching the 
"^(ethernet-)?port@[0-9]+$" regular expression is expected to be an 
object conforming to the structure defined in dsa-port.yaml.

Does that make sense?

> 
>>
>>>
>>> Second, amount of if-then-if-then located in existing blocks (not
>>> top-level) is quite big. I counted if-then-using defs, where defs has
>>> patternProps-patternProps-if-then-if-then-properties.... OMG. :)
>>
>> Yup, not much to do if we want to keep the information. I'm still
>> maintaining this though. ¯\_(ツ)_/¯
> 
> Maybe it should be split into few bindings sharing common part.

Agreed, I think it makes sense to split this to MT7530, MT7531, and 
MT7988. I will do this after this series.

Arınç

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Krzysztof Kozlowski]

On 07/04/2023 11:46, Arınç ÜNAL wrote:
> On 7.04.2023 12:07, Krzysztof Kozlowski wrote:
>> On 06/04/2023 21:18, Arınç ÜNAL wrote:
>>> On 6.04.2023 22:07, Krzysztof Kozlowski wrote:
>>>> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>>>>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>>>
>>>>> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
>>>>> to be used is internal. Add this.
>>>>>
>>>>> Some bindings are incorrect for this switch now, so move them to more
>>>>> specific places.
>>>>>
>>>>> Address the incorrect information of which ports can be used as a user
>>>>> port. Any port can be used as a user port.
>>>>>
>>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>>> ---
>>>>>    .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>>>>>    1 file changed, 46 insertions(+), 17 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>>> index 7045a98d9593..605888ce2bc6 100644
>>>>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>>> @@ -160,22 +160,6 @@ patternProperties:
>>>>>          "^(ethernet-)?port@[0-9]+$":
>>>>>            type: object
>>>>>    
>>>>> -        properties:
>>>>> -          reg:
>>>>> -            description:
>>>>> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
>>>>> -              for user ports.
>>>>> -
>>>>> -        allOf:
>>>>> -          - if:
>>>>> -              required: [ ethernet ]
>>>>> -            then:
>>>>> -              properties:
>>>>> -                reg:
>>>>> -                  enum:
>>>>> -                    - 5
>>>>> -                    - 6
>>>>> -
>>>>
>>>> I have doubts that the binding is still maintainable/reviewable. First,
>>>> why do you need all above patterns after removal of entire contents?
>>>
>>> The 'type: object' item is still globally used. I'd have to define that
>>> on each definitions, I suppose?
>>
>> Doesn't it come from dsa.yaml/dsa-port.yaml schema?
> 
> It comes from dsa.yaml#/$defs/ethernet-ports which this schema already 
> refers to. I'll remove the patterns above.
> 
> Though 'type: object' is not there for "^(ethernet-)?port@[0-9]+$". I 
> think I should add it there as the dsa-port.yaml schema defines the 
> properties of the DSA switch port object. 

It has ref, which is enough.

> So the value matching the 
> "^(ethernet-)?port@[0-9]+$" regular expression is expected to be an 
> object conforming to the structure defined in dsa-port.yaml.
> 
> Does that make sense?

Hm, no, sorry, I still do not see what exactly is missing from
dsa.yaml/port that you need to define here.


Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/7] dt-bindings: net: dsa: mediatek,mt7530: add port bindings for MT7988

[Arınç ÜNAL]

On 12.04.2023 19:39, Krzysztof Kozlowski wrote:
> On 07/04/2023 11:46, Arınç ÜNAL wrote:
>> On 7.04.2023 12:07, Krzysztof Kozlowski wrote:
>>> On 06/04/2023 21:18, Arınç ÜNAL wrote:
>>>> On 6.04.2023 22:07, Krzysztof Kozlowski wrote:
>>>>> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>>>>>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>>>>
>>>>>> The switch on MT7988 has got only port 6 as a CPU port. The only phy-mode
>>>>>> to be used is internal. Add this.
>>>>>>
>>>>>> Some bindings are incorrect for this switch now, so move them to more
>>>>>> specific places.
>>>>>>
>>>>>> Address the incorrect information of which ports can be used as a user
>>>>>> port. Any port can be used as a user port.
>>>>>>
>>>>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>>>> ---
>>>>>>     .../bindings/net/dsa/mediatek,mt7530.yaml     | 63 ++++++++++++++-----
>>>>>>     1 file changed, 46 insertions(+), 17 deletions(-)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>>>> index 7045a98d9593..605888ce2bc6 100644
>>>>>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>>>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>>>>> @@ -160,22 +160,6 @@ patternProperties:
>>>>>>           "^(ethernet-)?port@[0-9]+$":
>>>>>>             type: object
>>>>>>     
>>>>>> -        properties:
>>>>>> -          reg:
>>>>>> -            description:
>>>>>> -              Port address described must be 5 or 6 for CPU port and from 0 to 5
>>>>>> -              for user ports.
>>>>>> -
>>>>>> -        allOf:
>>>>>> -          - if:
>>>>>> -              required: [ ethernet ]
>>>>>> -            then:
>>>>>> -              properties:
>>>>>> -                reg:
>>>>>> -                  enum:
>>>>>> -                    - 5
>>>>>> -                    - 6
>>>>>> -
>>>>>
>>>>> I have doubts that the binding is still maintainable/reviewable. First,
>>>>> why do you need all above patterns after removal of entire contents?
>>>>
>>>> The 'type: object' item is still globally used. I'd have to define that
>>>> on each definitions, I suppose?
>>>
>>> Doesn't it come from dsa.yaml/dsa-port.yaml schema?
>>
>> It comes from dsa.yaml#/$defs/ethernet-ports which this schema already
>> refers to. I'll remove the patterns above.
>>
>> Though 'type: object' is not there for "^(ethernet-)?port@[0-9]+$". I
>> think I should add it there as the dsa-port.yaml schema defines the
>> properties of the DSA switch port object.
> 
> It has ref, which is enough.
> 
>> So the value matching the
>> "^(ethernet-)?port@[0-9]+$" regular expression is expected to be an
>> object conforming to the structure defined in dsa-port.yaml.
>>
>> Does that make sense?
> 
> Hm, no, sorry, I still do not see what exactly is missing from
> dsa.yaml/port that you need to define here.

Nothing, I forgot defining either ref or type is enough.

Arınç

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/7] dt-bindings: net: dsa: mediatek,mt7530: allow delayed rgmii phy-modes

[arinc9.unal]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

According to mt7530_mac_port_get_caps() and mt7531_mac_port_get_caps(), all
rgmii phy-modes on port 5 are supported. Add the remaining to
mt7530-dsa-ports and mt7531-dsa-ports definitions.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml        | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 605888ce2bc6..9d99f7303453 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -196,6 +196,9 @@ $defs:
                       - gmii
                       - mii
                       - rgmii
+                      - rgmii-id
+                      - rgmii-rxid
+                      - rgmii-txid
               else:
                 properties:
                   phy-mode:
@@ -234,6 +237,9 @@ $defs:
                       - 1000base-x
                       - 2500base-x
                       - rgmii
+                      - rgmii-id
+                      - rgmii-rxid
+                      - rgmii-txid
                       - sgmii
               else:
                 properties:
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/7] dt-bindings: net: dsa: mediatek,mt7530: allow delayed rgmii phy-modes

[Daniel Golle]

On Thu, Apr 06, 2023 at 11:01:38AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> According to mt7530_mac_port_get_caps() and mt7531_mac_port_get_caps(), all
> rgmii phy-modes on port 5 are supported. Add the remaining to
> mt7530-dsa-ports and mt7531-dsa-ports definitions.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml        | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 605888ce2bc6..9d99f7303453 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -196,6 +196,9 @@ $defs:
>                        - gmii
>                        - mii
>                        - rgmii
> +                      - rgmii-id
> +                      - rgmii-rxid
> +                      - rgmii-txid
>                else:
>                  properties:
>                    phy-mode:
> @@ -234,6 +237,9 @@ $defs:
>                        - 1000base-x
>                        - 2500base-x
>                        - rgmii
> +                      - rgmii-id
> +                      - rgmii-rxid
> +                      - rgmii-txid
>                        - sgmii
>                else:
>                  properties:
> -- 
> 2.37.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/7] dt-bindings: net: dsa: mediatek,mt7530: disallow reset without mediatek,mcm

[arinc9.unal]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

The resets and reset-names properties are used only if mediatek,mcm is
used. Set them to false if mediatek,mcm is not used.

Remove now unnecessary 'reset-names: false' from MT7988.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml         | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 9d99f7303453..3fd953b1453e 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -282,6 +282,10 @@ allOf:
       required:
         - resets
         - reset-names
+    else:
+      properties:
+        resets: false
+        reset-names: false
 
   - dependencies:
       interrupt-controller: [ interrupts ]
@@ -324,7 +328,6 @@ allOf:
       properties:
         gpio-controller: false
         mediatek,mcm: false
-        reset-names: false
 
 unevaluatedProperties: false
 
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/7] dt-bindings: net: dsa: mediatek,mt7530: disallow reset without mediatek,mcm

[Daniel Golle]

On Thu, Apr 06, 2023 at 11:01:39AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The resets and reset-names properties are used only if mediatek,mcm is
> used. Set them to false if mediatek,mcm is not used.
> 
> Remove now unnecessary 'reset-names: false' from MT7988.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml         | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 9d99f7303453..3fd953b1453e 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -282,6 +282,10 @@ allOf:
>        required:
>          - resets
>          - reset-names
> +    else:
> +      properties:
> +        resets: false
> +        reset-names: false
>  
>    - dependencies:
>        interrupt-controller: [ interrupts ]
> @@ -324,7 +328,6 @@ allOf:
>        properties:
>          gpio-controller: false
>          mediatek,mcm: false
> -        reset-names: false
>  
>  unevaluatedProperties: false
>  
> -- 
> 2.37.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/7] dt-bindings: net: dsa: mediatek,mt7530: disallow reset without mediatek,mcm

[Krzysztof Kozlowski]

On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The resets and reset-names properties are used only if mediatek,mcm is
> used. Set them to false if mediatek,mcm is not used.
> 
> Remove now unnecessary 'reset-names: false' from MT7988.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
>  .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml         | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 9d99f7303453..3fd953b1453e 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -282,6 +282,10 @@ allOf:
>        required:
>          - resets
>          - reset-names
> +    else:
> +      properties:
> +        resets: false
> +        reset-names: false
>  
>    - dependencies:
>        interrupt-controller: [ interrupts ]
> @@ -324,7 +328,6 @@ allOf:
>        properties:
>          gpio-controller: false
>          mediatek,mcm: false
> -        reset-names: false

I don't see such hunk in linux-next.


Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/7] dt-bindings: net: dsa: mediatek,mt7530: disallow reset without mediatek,mcm

[Arınç ÜNAL]

On 6.04.2023 22:08, Krzysztof Kozlowski wrote:
> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>
>> The resets and reset-names properties are used only if mediatek,mcm is
>> used. Set them to false if mediatek,mcm is not used.
>>
>> Remove now unnecessary 'reset-names: false' from MT7988.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>>   .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml         | 5 ++++-
>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> index 9d99f7303453..3fd953b1453e 100644
>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>> @@ -282,6 +282,10 @@ allOf:
>>         required:
>>           - resets
>>           - reset-names
>> +    else:
>> +      properties:
>> +        resets: false
>> +        reset-names: false
>>   
>>     - dependencies:
>>         interrupt-controller: [ interrupts ]
>> @@ -324,7 +328,6 @@ allOf:
>>         properties:
>>           gpio-controller: false
>>           mediatek,mcm: false
>> -        reset-names: false
> 
> I don't see such hunk in linux-next.

This was added very recently so it's only on net-next at the moment.

Arınç

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 5/7] dt-bindings: net: dsa: mediatek,mt7530: disallow reset without mediatek,mcm

[Krzysztof Kozlowski]

On 06/04/2023 21:19, Arınç ÜNAL wrote:
> On 6.04.2023 22:08, Krzysztof Kozlowski wrote:
>> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>>
>>> The resets and reset-names properties are used only if mediatek,mcm is
>>> used. Set them to false if mediatek,mcm is not used.
>>>
>>> Remove now unnecessary 'reset-names: false' from MT7988.
>>>
>>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>>> ---
>>>   .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml         | 5 ++++-
>>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>> index 9d99f7303453..3fd953b1453e 100644
>>> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
>>> @@ -282,6 +282,10 @@ allOf:
>>>         required:
>>>           - resets
>>>           - reset-names
>>> +    else:
>>> +      properties:
>>> +        resets: false
>>> +        reset-names: false
>>>   
>>>     - dependencies:
>>>         interrupt-controller: [ interrupts ]
>>> @@ -324,7 +328,6 @@ allOf:
>>>         properties:
>>>           gpio-controller: false
>>>           mediatek,mcm: false
>>> -        reset-names: false
>>
>> I don't see such hunk in linux-next.
> 
> This was added very recently so it's only on net-next at the moment.

OK, I was checking one few days old.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/7] dt-bindings: net: dsa: mediatek,mt7530: disallow core-supply and io-supply

[arinc9.unal]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

The core-supply and io-supply properties are used only on hardware that
uses the mediatek,mt7530 compatible string. Set them to false if the
compatible string is not mediatek,mt7530.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml          | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 3fd953b1453e..0095b7fcef72 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -299,6 +299,10 @@ allOf:
       required:
         - core-supply
         - io-supply
+    else:
+      properties:
+        core-supply: false
+        io-supply: false
 
   - if:
       properties:
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 6/7] dt-bindings: net: dsa: mediatek,mt7530: disallow core-supply and io-supply

[Daniel Golle]

On Thu, Apr 06, 2023 at 11:01:40AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The core-supply and io-supply properties are used only on hardware that
> uses the mediatek,mt7530 compatible string. Set them to false if the
> compatible string is not mediatek,mt7530.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml          | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 3fd953b1453e..0095b7fcef72 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -299,6 +299,10 @@ allOf:
>        required:
>          - core-supply
>          - io-supply
> +    else:
> +      properties:
> +        core-supply: false
> +        io-supply: false
>  
>    - if:
>        properties:
> -- 
> 2.37.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/7] dt-bindings: net: dsa: mediatek,mt7530: allow mediatek,mcm on MT7531

[arinc9.unal]

From: Arınç ÜNAL <arinc.unal@arinc9.com>

Allow mediatek,mcm on MT7531. There's code specific to MT7531 that checks
if the switch is part of an MCM.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 0095b7fcef72..b1dc1600f0dc 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -312,7 +312,6 @@ allOf:
       $ref: "#/$defs/mt7531-dsa-port"
       properties:
         gpio-controller: false
-        mediatek,mcm: false
 
   - if:
       properties:
-- 
2.37.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 7/7] dt-bindings: net: dsa: mediatek,mt7530: allow mediatek,mcm on MT7531

[Daniel Golle]

On Thu, Apr 06, 2023 at 11:01:41AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> Allow mediatek,mcm on MT7531. There's code specific to MT7531 that checks
> if the switch is part of an MCM.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index 0095b7fcef72..b1dc1600f0dc 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -312,7 +312,6 @@ allOf:
>        $ref: "#/$defs/mt7531-dsa-port"
>        properties:
>          gpio-controller: false
> -        mediatek,mcm: false
>  
>    - if:
>        properties:
> -- 
> 2.37.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/7] dt-bindings: net: dsa: mediatek,mt7530: correct brand name

[Daniel Golle]

On Thu, Apr 06, 2023 at 11:01:35AM +0300, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The brand name is MediaTek, change it to that.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>

Acked-by: Daniel Golle <daniel@makrotopia.org>

> ---
>  Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> index e532c6b795f4..6df995478275 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
> @@ -4,7 +4,7 @@
>  $id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Mediatek MT7530 and MT7531 Ethernet Switches
> +title: MediaTek MT7530 and MT7531 Ethernet Switches
>  
>  maintainers:
>    - Arınç ÜNAL <arinc.unal@arinc9.com>
> -- 
> 2.37.2
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/7] dt-bindings: net: dsa: mediatek,mt7530: correct brand name

[Krzysztof Kozlowski]

On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> The brand name is MediaTek, change it to that.
> 
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
>  Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 2 +-


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

although maybe this would be a lot of churn if done per-file.

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/7] dt-bindings: net: dsa: mediatek,mt7530: correct brand name

[Arınç ÜNAL]

On 6.04.2023 22:00, Krzysztof Kozlowski wrote:
> On 06/04/2023 10:01, arinc9.unal@gmail.com wrote:
>> From: Arınç ÜNAL <arinc.unal@arinc9.com>
>>
>> The brand name is MediaTek, change it to that.
>>
>> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
>> ---
>>   Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 2 +-
> 
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> although maybe this would be a lot of churn if done per-file.

I don't intend to. There's only this schema of MediaTek for DSA, and I 
happen to maintain it. Maybe I can do a treewide change for other 
schemas in the future.

Arınç

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel