From: Oliver Upton <oliver.upton@linux.dev>
To: Jing Zhang <jingzhangos@google.com>
Cc: KVM <kvm@vger.kernel.org>, KVMARM <kvmarm@lists.linux.dev>,
ARMLinux <linux-arm-kernel@lists.infradead.org>,
Marc Zyngier <maz@kernel.org>, Oliver Upton <oupton@google.com>,
Will Deacon <will@kernel.org>,
Paolo Bonzini <pbonzini@redhat.com>,
James Morse <james.morse@arm.com>,
Alexandru Elisei <alexandru.elisei@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Fuad Tabba <tabba@google.com>, Reiji Watanabe <reijiw@google.com>,
Raghavendra Rao Ananta <rananta@google.com>,
Suraj Jitindar Singh <surajjs@amazon.com>
Subject: Re: [PATCH v4 3/4] KVM: arm64: Enable writable for ID_AA64PFR0_EL1
Date: Mon, 26 Jun 2023 16:48:54 +0000 [thread overview]
Message-ID: <ZJnBdtkzeQuPqQGO@linux.dev> (raw)
In-Reply-To: <20230607194554.87359-4-jingzhangos@google.com>
On Wed, Jun 07, 2023 at 07:45:53PM +0000, Jing Zhang wrote:
> Return an error if userspace tries to set SVE field of the register
> to a value that conflicts with SVE configuration for the guest.
> SIMD/FP/SVE fields of the requested value are validated according to
> Arm ARM.
>
> Signed-off-by: Jing Zhang <jingzhangos@google.com>
> ---
> arch/arm64/kvm/sys_regs.c | 31 +++++++++++++++++++++++++++++--
> 1 file changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
> index 3964a85a89fe..8f3ad9c12b27 100644
> --- a/arch/arm64/kvm/sys_regs.c
> +++ b/arch/arm64/kvm/sys_regs.c
> @@ -1509,9 +1509,36 @@ static u64 read_sanitised_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
>
> val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_AMU);
>
> + if (!system_supports_sve())
> + val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_SVE);
> +
If the system doesn't support SVE, wouldn't the sanitised system-wide
value hide the feature as well? A few lines up we already mask this
field based on whether or not the vCPU has the feature, which is
actually meaningful.
> return val;
> }
>
> +static int set_id_aa64pfr0_el1(struct kvm_vcpu *vcpu,
> + const struct sys_reg_desc *rd,
> + u64 val)
> +{
> + int fp, simd;
> + bool has_sve = id_aa64pfr0_sve(val);
> +
> + simd = cpuid_feature_extract_signed_field(val, ID_AA64PFR0_EL1_AdvSIMD_SHIFT);
> + fp = cpuid_feature_extract_signed_field(val, ID_AA64PFR0_EL1_FP_SHIFT);
> + /* AdvSIMD field must have the same value as FP field */
> + if (simd != fp)
> + return -EINVAL;
> +
> + /* fp must be supported when sve is supported */
> + if (has_sve && (fp < 0))
> + return -EINVAL;
> +
> + /* Check if there is a conflict with a request via KVM_ARM_VCPU_INIT */
> + if (vcpu_has_sve(vcpu) ^ has_sve)
> + return -EPERM;
Same comment here on cross-field plumbing.
--
Thanks,
Oliver
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-06-26 16:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-07 19:45 [PATCH v4 0/4] Enable writable for idregs DFR0,PFR0, MMFR{0,1,2} Jing Zhang
2023-06-07 19:45 ` [PATCH v4 1/4] KVM: arm64: Enable writable for ID_AA64DFR0_EL1 Jing Zhang
2023-06-26 16:34 ` Oliver Upton
2023-07-04 15:06 ` Cornelia Huck
2023-07-04 16:04 ` Oliver Upton
2023-07-05 8:48 ` Cornelia Huck
2023-07-05 19:28 ` Jing Zhang
2023-06-07 19:45 ` [PATCH v4 2/4] KVM: arm64: Enable writable for ID_DFR0_EL1 Jing Zhang
2023-06-07 19:45 ` [PATCH v4 3/4] KVM: arm64: Enable writable for ID_AA64PFR0_EL1 Jing Zhang
2023-06-26 16:48 ` Oliver Upton [this message]
2023-07-05 19:30 ` Jing Zhang
2023-06-07 19:45 ` [PATCH v4 4/4] KVM: arm64: Enable writable for ID_AA64MMFR{0, 1, 2}_EL1 Jing Zhang
2023-06-26 20:52 ` [PATCH v4 0/4] Enable writable for idregs DFR0,PFR0, MMFR{0,1,2} Oliver Upton
2023-07-05 19:25 ` Jing Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZJnBdtkzeQuPqQGO@linux.dev \
--to=oliver.upton@linux.dev \
--cc=alexandru.elisei@arm.com \
--cc=james.morse@arm.com \
--cc=jingzhangos@google.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=maz@kernel.org \
--cc=oupton@google.com \
--cc=pbonzini@redhat.com \
--cc=rananta@google.com \
--cc=reijiw@google.com \
--cc=surajjs@amazon.com \
--cc=suzuki.poulose@arm.com \
--cc=tabba@google.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).