From: Frank Li <Frank.li@nxp.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: helgaas@kernel.org, bhelgaas@google.com,
devicetree@vger.kernel.org, gustavo.pimentel@synopsys.com,
imx@lists.linux.dev, kw@linux.com, leoyang.li@nxp.com,
linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
lorenzo.pieralisi@arm.com, lpieralisi@kernel.org,
mani@kernel.org, minghuan.lian@nxp.com, mingkai.hu@nxp.com,
robh+dt@kernel.org, roy.zang@nxp.com, shawnguo@kernel.org,
zhiqiang.hou@nxp.com
Subject: Re: [PATCH v10 resent 3/3] PCI: layerscape: Add power management support for ls1028a
Date: Wed, 9 Aug 2023 11:28:03 -0400 [thread overview]
Message-ID: <ZNOwg6En8e+epmGR@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20230809061604.GC5348@thinkpad>
On Wed, Aug 09, 2023 at 11:46:04AM +0530, Manivannan Sadhasivam wrote:
> On Mon, Aug 07, 2023 at 12:52:38PM -0400, Frank Li wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> >
> > Add PME_Turn_off/PME_TO_Ack handshake sequence for ls1028a platform. Call
> > common dwc dw_pcie_suspend(resume)_noirq() function when system enter/exit
> > suspend state.
> >
> > Acked-by: Manivannan Sadhasivam <mani@kernel.org>
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> > drivers/pci/controller/dwc/pci-layerscape.c | 130 ++++++++++++++++++--
> > 1 file changed, 121 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> > index ed5fb492fe084..7586aece769b2 100644
> > --- a/drivers/pci/controller/dwc/pci-layerscape.c
> > +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> > @@ -8,9 +8,11 @@
> > * Author: Minghuan Lian <Minghuan.Lian@freescale.com>
> > */
> >
> > +#include <linux/delay.h>
> > #include <linux/kernel.h>
> > #include <linux/interrupt.h>
> > #include <linux/init.h>
> > +#include <linux/iopoll.h>
> > #include <linux/of_pci.h>
> > #include <linux/of_platform.h>
> > #include <linux/of_address.h>
> > @@ -20,6 +22,7 @@
> > #include <linux/mfd/syscon.h>
> > #include <linux/regmap.h>
> >
> > +#include "../../pci.h"
> > #include "pcie-designware.h"
> >
> > /* PEX Internal Configuration Registers */
> > @@ -27,12 +30,26 @@
> > #define PCIE_ABSERR 0x8d0 /* Bridge Slave Error Response Register */
> > #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */
> >
> > +/* PF Message Command Register */
> > +#define LS_PCIE_PF_MCR 0x2c
> > +#define PF_MCR_PTOMR BIT(0)
> > +#define PF_MCR_EXL2S BIT(1)
> > +
> > #define PCIE_IATU_NUM 6
> >
> > +struct ls_pcie_drvdata {
> > + const u32 pf_off;
> > + bool pm_support;
> > +};
> > +
> > struct ls_pcie {
> > struct dw_pcie *pci;
> > + const struct ls_pcie_drvdata *drvdata;
> > + void __iomem *pf_base;
> > + bool big_endian;
> > };
> >
> > +#define ls_pcie_pf_readl_addr(addr) ls_pcie_pf_readl(pcie, addr)
> > #define to_ls_pcie(x) dev_get_drvdata((x)->dev)
> >
> > static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> > @@ -73,6 +90,60 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
> > iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
> > }
> >
> > +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> > +{
> > + if (pcie->big_endian)
> > + return ioread32be(pcie->pf_base + off);
> > +
> > + return ioread32(pcie->pf_base + off);
> > +}
> > +
> > +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> > +{
> > + if (pcie->big_endian)
> > + iowrite32be(val, pcie->pf_base + off);
> > + else
> > + iowrite32(val, pcie->pf_base + off);
> > +}
> > +
> > +static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> > +{
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > + u32 val;
> > + int ret;
> > +
> > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > + val |= PF_MCR_PTOMR;
> > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > +
> > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > + val, !(val & PF_MCR_PTOMR),
> > + PCIE_PME_TO_L2_TIMEOUT_US/10,
> > + PCIE_PME_TO_L2_TIMEOUT_US);
> > + if (ret)
> > + dev_err(pcie->pci->dev, "poll turn off message timeout\n");
> > +}
> > +
> > +static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> > +{
> > + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > + struct ls_pcie *pcie = to_ls_pcie(pci);
> > + u32 val;
> > + int ret;
> > +
> > + val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> > + val |= PF_MCR_EXL2S;
> > + ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> > +
> > + ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> > + val, !(val & PF_MCR_EXL2S),
> > + PCIE_PME_TO_L2_TIMEOUT_US/10,
> > + PCIE_PME_TO_L2_TIMEOUT_US);
> > + if (ret)
> > + dev_err(pcie->pci->dev, "poll exit L2 state timeout\n");
>
> I specifically mentioned that you need to change this error message and the one
> below before adding my Acked-by tag. But you just added the tag without
> incorporating the changes :/
Sorry, I found I forget run 'git add' when I run git commit --amend.
Change just leave in local tree.
Will Send v11.
Frank
>
> - Mani
>
> > +}
> > +
> > static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> > {
> > struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> > @@ -91,18 +162,28 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
> >
> > static const struct dw_pcie_host_ops ls_pcie_host_ops = {
> > .host_init = ls_pcie_host_init,
> > + .pme_turn_off = ls_pcie_send_turnoff_msg,
> > + .exit_from_l2 = ls_pcie_exit_from_l2,
> > +};
> > +
> > +static const struct ls_pcie_drvdata ls1021a_drvdata = {
> > +};
> > +
> > +static const struct ls_pcie_drvdata layerscape_drvdata = {
> > + .pf_off = 0xc0000,
> > + .pm_support = true,
> > };
> >
> > static const struct of_device_id ls_pcie_of_match[] = {
> > - { .compatible = "fsl,ls1012a-pcie", },
> > - { .compatible = "fsl,ls1021a-pcie", },
> > - { .compatible = "fsl,ls1028a-pcie", },
> > - { .compatible = "fsl,ls1043a-pcie", },
> > - { .compatible = "fsl,ls1046a-pcie", },
> > - { .compatible = "fsl,ls2080a-pcie", },
> > - { .compatible = "fsl,ls2085a-pcie", },
> > - { .compatible = "fsl,ls2088a-pcie", },
> > - { .compatible = "fsl,ls1088a-pcie", },
> > + { .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
> > + { .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> > + { .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata },
> > + { .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata },
> > { },
> > };
> >
> > @@ -121,6 +202,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
> > if (!pci)
> > return -ENOMEM;
> >
> > + pcie->drvdata = of_device_get_match_data(dev);
> > +
> > pci->dev = dev;
> > pci->pp.ops = &ls_pcie_host_ops;
> >
> > @@ -131,6 +214,10 @@ static int ls_pcie_probe(struct platform_device *pdev)
> > if (IS_ERR(pci->dbi_base))
> > return PTR_ERR(pci->dbi_base);
> >
> > + pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
> > +
> > + pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> > +
> > if (!ls_pcie_is_bridge(pcie))
> > return -ENODEV;
> >
> > @@ -139,12 +226,37 @@ static int ls_pcie_probe(struct platform_device *pdev)
> > return dw_pcie_host_init(&pci->pp);
> > }
> >
> > +static int ls_pcie_suspend_noirq(struct device *dev)
> > +{
> > + struct ls_pcie *pcie = dev_get_drvdata(dev);
> > +
> > + if (!pcie->drvdata->pm_support)
> > + return 0;
> > +
> > + return dw_pcie_suspend_noirq(pcie->pci);
> > +}
> > +
> > +static int ls_pcie_resume_noirq(struct device *dev)
> > +{
> > + struct ls_pcie *pcie = dev_get_drvdata(dev);
> > +
> > + if (!pcie->drvdata->pm_support)
> > + return 0;
> > +
> > + return dw_pcie_resume_noirq(pcie->pci);
> > +}
> > +
> > +static const struct dev_pm_ops ls_pcie_pm_ops = {
> > + NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq, ls_pcie_resume_noirq)
> > +};
> > +
> > static struct platform_driver ls_pcie_driver = {
> > .probe = ls_pcie_probe,
> > .driver = {
> > .name = "layerscape-pcie",
> > .of_match_table = ls_pcie_of_match,
> > .suppress_bind_attrs = true,
> > + .pm = &ls_pcie_pm_ops,
> > },
> > };
> > builtin_platform_driver(ls_pcie_driver);
> > --
> > 2.34.1
> >
>
> --
> மணிவண்ணன் சதாசிவம்
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2023-08-09 15:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-07 16:52 [PATCH v10 resend 0/3] dwc general suspend/resume functionality Frank Li
2023-08-07 16:52 ` [PATCH v10 resent 1/3] PCI: Add macro PCIE_PME_TO_L2_TIMEOUT_US Frank Li
2023-08-07 16:52 ` [PATCH v10 resent 2/3] PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitions Frank Li
2023-08-07 16:52 ` [PATCH v10 resent 3/3] PCI: layerscape: Add power management support for ls1028a Frank Li
2023-08-09 6:16 ` Manivannan Sadhasivam
2023-08-09 15:28 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZNOwg6En8e+epmGR@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=helgaas@kernel.org \
--cc=imx@lists.linux.dev \
--cc=kw@linux.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=robh+dt@kernel.org \
--cc=roy.zang@nxp.com \
--cc=shawnguo@kernel.org \
--cc=zhiqiang.hou@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox