* [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface"
@ 2023-08-26 10:02 Russell King (Oracle)
2023-08-28 20:00 ` patchwork-bot+netdevbpf
2023-08-29 12:38 ` Alexander Stein
0 siblings, 2 replies; 5+ messages in thread
From: Russell King (Oracle) @ 2023-08-26 10:02 UTC (permalink / raw)
To: Alexandre Torgue, Jose Abreu
Cc: Andrew Lunn, David S. Miller, Eric Dumazet, Feiyang Chen,
Heiner Kallweit, Jakub Kicinski, linux-arm-kernel, linux-stm32,
Maxime Coquelin, netdev, Paolo Abeni, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team,
Vladimir Zapolskiy, Emil Renner Berthing, Samin Guo, Chen-Yu Tsai,
Jernej Skrabec, Samuel Holland, Matthias Brugger,
AngeloGioacchino Del Regno, linux-sunxi, linux-mediatek
Clarify the difference between "interface" and "phy_interface" in
struct plat_stmmacenet_data, both by adding a comment, and also
renaming "interface" to be "mac_interface". The difference between
these are:
MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media
^ ^
mac_interface phy_interface
Note that phylink currently only deals with phy_interface.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
One last patch before Sunday - I would like to get this merged as it
touches multiple stmmac platforms before any further are added.
This patch merely renames the "plat_dat->interface" to "->mac_interface"
but doesn't change which any code uses.
All code which uses plat->interface (now plat->mac_interface) are
determining the interface from the MAC side not the PHY side. These
need a code review against the docs to check whether that is correct.
Essentially, every .c file touched by this needs a code review. This
code review should not affect whether this patch is merged.
.../net/ethernet/stmicro/stmmac/dwmac-imx.c | 14 ++++++-------
.../ethernet/stmicro/stmmac/dwmac-ingenic.c | 20 +++++++++----------
.../ethernet/stmicro/stmmac/dwmac-loongson.c | 2 +-
.../ethernet/stmicro/stmmac/dwmac-lpc18xx.c | 4 ++--
.../ethernet/stmicro/stmmac/dwmac-mediatek.c | 2 +-
.../ethernet/stmicro/stmmac/dwmac-socfpga.c | 2 +-
.../ethernet/stmicro/stmmac/dwmac-starfive.c | 4 ++--
.../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 8 ++++----
.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 6 +++---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++--
.../ethernet/stmicro/stmmac/stmmac_platform.c | 6 +++---
include/linux/stmmac.h | 15 +++++++++++++-
12 files changed, 52 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
index 535856fffaea..df34e34cc14f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c
@@ -70,7 +70,7 @@ static int imx8mp_set_intf_mode(struct plat_stmmacenet_data *plat_dat)
struct imx_priv_data *dwmac = plat_dat->bsp_priv;
int val;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
val = GPR_ENET_QOS_INTF_SEL_MII;
break;
@@ -87,7 +87,7 @@ static int imx8mp_set_intf_mode(struct plat_stmmacenet_data *plat_dat)
break;
default:
pr_debug("imx dwmac doesn't support %d interface\n",
- plat_dat->interface);
+ plat_dat->mac_interface);
return -EINVAL;
}
@@ -110,7 +110,7 @@ static int imx93_set_intf_mode(struct plat_stmmacenet_data *plat_dat)
struct imx_priv_data *dwmac = plat_dat->bsp_priv;
int val;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
val = MX93_GPR_ENET_QOS_INTF_SEL_MII;
break;
@@ -125,7 +125,7 @@ static int imx93_set_intf_mode(struct plat_stmmacenet_data *plat_dat)
break;
default:
dev_dbg(dwmac->dev, "imx dwmac doesn't support %d interface\n",
- plat_dat->interface);
+ plat_dat->mac_interface);
return -EINVAL;
}
@@ -192,8 +192,8 @@ static void imx_dwmac_fix_speed(void *priv, unsigned int speed, unsigned int mod
plat_dat = dwmac->plat_dat;
if (dwmac->ops->mac_rgmii_txclk_auto_adj ||
- (plat_dat->interface == PHY_INTERFACE_MODE_RMII) ||
- (plat_dat->interface == PHY_INTERFACE_MODE_MII))
+ (plat_dat->mac_interface == PHY_INTERFACE_MODE_RMII) ||
+ (plat_dat->mac_interface == PHY_INTERFACE_MODE_MII))
return;
switch (speed) {
@@ -260,7 +260,7 @@ static int imx_dwmac_mx93_reset(void *priv, void __iomem *ioaddr)
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) {
+ if (plat_dat->mac_interface == PHY_INTERFACE_MODE_RMII) {
usleep_range(100, 200);
writel(RMII_RESET_SPEED, ioaddr + MAC_CTRL_REG);
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
index e22ef0d6bc73..0a20c3d24722 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
@@ -89,7 +89,7 @@ static int jz4775_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
struct ingenic_mac *mac = plat_dat->bsp_priv;
unsigned int val;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
val = FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT) |
FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_MII);
@@ -118,7 +118,7 @@ static int jz4775_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
break;
default:
- dev_err(mac->dev, "Unsupported interface %d", plat_dat->interface);
+ dev_err(mac->dev, "Unsupported interface %d", plat_dat->mac_interface);
return -EINVAL;
}
@@ -130,13 +130,13 @@ static int x1000_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
{
struct ingenic_mac *mac = plat_dat->bsp_priv;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_RMII:
dev_dbg(mac->dev, "MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n");
break;
default:
- dev_err(mac->dev, "Unsupported interface %d", plat_dat->interface);
+ dev_err(mac->dev, "Unsupported interface %d", plat_dat->mac_interface);
return -EINVAL;
}
@@ -149,14 +149,14 @@ static int x1600_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
struct ingenic_mac *mac = plat_dat->bsp_priv;
unsigned int val;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_RMII:
val = FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII);
dev_dbg(mac->dev, "MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n");
break;
default:
- dev_err(mac->dev, "Unsupported interface %d", plat_dat->interface);
+ dev_err(mac->dev, "Unsupported interface %d", plat_dat->mac_interface);
return -EINVAL;
}
@@ -169,7 +169,7 @@ static int x1830_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
struct ingenic_mac *mac = plat_dat->bsp_priv;
unsigned int val;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_RMII:
val = FIELD_PREP(MACPHYC_MODE_SEL_MASK, MACPHYC_MODE_SEL_RMII) |
FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII);
@@ -177,7 +177,7 @@ static int x1830_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
break;
default:
- dev_err(mac->dev, "Unsupported interface %d", plat_dat->interface);
+ dev_err(mac->dev, "Unsupported interface %d", plat_dat->mac_interface);
return -EINVAL;
}
@@ -190,7 +190,7 @@ static int x2000_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
struct ingenic_mac *mac = plat_dat->bsp_priv;
unsigned int val;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_RMII:
val = FIELD_PREP(MACPHYC_TX_SEL_MASK, MACPHYC_TX_SEL_ORIGIN) |
FIELD_PREP(MACPHYC_RX_SEL_MASK, MACPHYC_RX_SEL_ORIGIN) |
@@ -220,7 +220,7 @@ static int x2000_mac_set_mode(struct plat_stmmacenet_data *plat_dat)
break;
default:
- dev_err(mac->dev, "Unsupported interface %d", plat_dat->interface);
+ dev_err(mac->dev, "Unsupported interface %d", plat_dat->mac_interface);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index a25c187d3185..2cd6fce5c993 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -117,7 +117,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
}
plat->phy_interface = phy_mode;
- plat->interface = PHY_INTERFACE_MODE_GMII;
+ plat->mac_interface = PHY_INTERFACE_MODE_GMII;
pci_set_master(pdev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
index 18e84ba693a6..d0aa674ce705 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
@@ -50,9 +50,9 @@ static int lpc18xx_dwmac_probe(struct platform_device *pdev)
goto err_remove_config_dt;
}
- if (plat_dat->interface == PHY_INTERFACE_MODE_MII) {
+ if (plat_dat->mac_interface == PHY_INTERFACE_MODE_MII) {
ethmode = LPC18XX_CREG_CREG6_ETHMODE_MII;
- } else if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) {
+ } else if (plat_dat->mac_interface == PHY_INTERFACE_MODE_RMII) {
ethmode = LPC18XX_CREG_CREG6_ETHMODE_RMII;
} else {
dev_err(&pdev->dev, "Only MII and RMII mode supported\n");
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
index 7580077383c0..cd796ec04132 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c
@@ -587,7 +587,7 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev,
{
int i;
- plat->interface = priv_plat->phy_mode;
+ plat->mac_interface = priv_plat->phy_mode;
if (priv_plat->mac_wol)
plat->flags |= STMMAC_FLAG_USE_PHY_WOL;
else
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 7db176e8691f..9bf102bbc6a0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -236,7 +236,7 @@ static int socfpga_get_plat_phymode(struct socfpga_dwmac *dwmac)
struct net_device *ndev = dev_get_drvdata(dwmac->dev);
struct stmmac_priv *priv = netdev_priv(ndev);
- return priv->plat->interface;
+ return priv->plat->mac_interface;
}
static void socfpga_sgmii_config(struct socfpga_dwmac *dwmac, bool enable)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
index 892612564694..9289bb87c3e3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c
@@ -60,7 +60,7 @@ static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
unsigned int mode;
int err;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_RMII:
mode = STARFIVE_DWMAC_PHY_INFT_RMII;
break;
@@ -72,7 +72,7 @@ static int starfive_dwmac_set_mode(struct plat_stmmacenet_data *plat_dat)
default:
dev_err(dwmac->dev, "unsupported interface %d\n",
- plat_dat->interface);
+ plat_dat->mac_interface);
return -EINVAL;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
index 3a09085819dc..26ea8c687881 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
@@ -171,7 +171,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
clk_rate = clk_get_rate(dwmac->clk_eth_ck);
dwmac->enable_eth_ck = false;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk)
dwmac->enable_eth_ck = true;
@@ -210,7 +210,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data *plat_dat)
break;
default:
pr_debug("SYSCFG init : Do not manage %d interface\n",
- plat_dat->interface);
+ plat_dat->mac_interface);
/* Do not manage others interfaces */
return -EINVAL;
}
@@ -230,7 +230,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
u32 reg = dwmac->mode_reg;
int val;
- switch (plat_dat->interface) {
+ switch (plat_dat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
val = SYSCFG_MCU_ETH_SEL_MII;
pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n");
@@ -241,7 +241,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data *plat_dat)
break;
default:
pr_debug("SYSCFG init : Do not manage %d interface\n",
- plat_dat->interface);
+ plat_dat->mac_interface);
/* Do not manage others interfaces */
return -EINVAL;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index c23420863a8d..01e77368eef1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -1016,7 +1016,7 @@ static int sun8i_dwmac_set_syscon(struct device *dev,
if (gmac->variant->support_rmii)
reg &= ~SYSCON_RMII_EN;
- switch (plat->interface) {
+ switch (plat->mac_interface) {
case PHY_INTERFACE_MODE_MII:
/* default */
break;
@@ -1031,7 +1031,7 @@ static int sun8i_dwmac_set_syscon(struct device *dev,
break;
default:
dev_err(dev, "Unsupported interface mode: %s",
- phy_modes(plat->interface));
+ phy_modes(plat->mac_interface));
return -EINVAL;
}
@@ -1231,7 +1231,7 @@ static int sun8i_dwmac_probe(struct platform_device *pdev)
/* platform data specifying hardware features and callbacks.
* hardware features were copied from Allwinner drivers.
*/
- plat_dat->interface = interface;
+ plat_dat->mac_interface = interface;
plat_dat->rx_coe = STMMAC_RX_COE_TYPE2;
plat_dat->tx_coe = 1;
plat_dat->flags |= STMMAC_FLAG_HAS_SUN8I;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index e52ae165c968..c92bab6e2341 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1119,7 +1119,7 @@ static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
*/
static void stmmac_check_pcs_mode(struct stmmac_priv *priv)
{
- int interface = priv->plat->interface;
+ int interface = priv->plat->mac_interface;
if (priv->dma_cap.pcs) {
if ((interface == PHY_INTERFACE_MODE_RGMII) ||
@@ -1214,7 +1214,9 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
priv->phylink_config.ovr_an_inband =
mdio_bus_data->xpcs_an_inband;
- /* Set the platform/firmware specified interface mode */
+ /* Set the platform/firmware specified interface mode. Note, phylink
+ * deals with the PHY interface mode, not the MAC interface mode.
+ */
__set_bit(mode, priv->phylink_config.supported_interfaces);
/* If we have an xpcs, it defines which PHY interfaces are supported. */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index ff330423ee66..35f4b1484029 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -419,9 +419,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
return ERR_PTR(phy_mode);
plat->phy_interface = phy_mode;
- plat->interface = stmmac_of_get_mac_mode(np);
- if (plat->interface < 0)
- plat->interface = plat->phy_interface;
+ plat->mac_interface = stmmac_of_get_mac_mode(np);
+ if (plat->mac_interface < 0)
+ plat->mac_interface = plat->phy_interface;
/* Some wrapper drivers still rely on phy_node. Let's save it while
* they are not converted to phylink. */
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index b2ccd827bb80..ce89cc3e4913 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -223,7 +223,20 @@ struct dwmac4_addrs {
struct plat_stmmacenet_data {
int bus_id;
int phy_addr;
- int interface;
+ /* MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media
+ * ^ ^
+ * mac_interface phy_interface
+ *
+ * mac_interface is the MAC-side interface, which may be the same
+ * as phy_interface if there is no intervening PCS. If there is a
+ * PCS, then mac_interface describes the interface mode between the
+ * MAC and PCS, and phy_interface describes the interface mode
+ * between the PCS and PHY.
+ */
+ phy_interface_t mac_interface;
+ /* phy_interface is the PHY-side interface - the interface used by
+ * an attached PHY.
+ */
phy_interface_t phy_interface;
struct stmmac_mdio_bus_data *mdio_bus_data;
struct device_node *phy_node;
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface" 2023-08-26 10:02 [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface" Russell King (Oracle) @ 2023-08-28 20:00 ` patchwork-bot+netdevbpf 2023-08-29 12:38 ` Alexander Stein 1 sibling, 0 replies; 5+ messages in thread From: patchwork-bot+netdevbpf @ 2023-08-28 20:00 UTC (permalink / raw) To: Russell King Cc: alexandre.torgue, joabreu, andrew, davem, edumazet, chenfeiyang, hkallweit1, kuba, linux-arm-kernel, linux-stm32, mcoquelin.stm32, netdev, pabeni, shawnguo, s.hauer, kernel, festevam, linux-imx, vz, kernel, samin.guo, wens, jernej.skrabec, samuel, matthias.bgg, angelogioacchino.delregno, linux-sunxi, linux-mediatek Hello: This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Sat, 26 Aug 2023 11:02:51 +0100 you wrote: > Clarify the difference between "interface" and "phy_interface" in > struct plat_stmmacenet_data, both by adding a comment, and also > renaming "interface" to be "mac_interface". The difference between > these are: > > MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media > ^ ^ > mac_interface phy_interface > > [...] Here is the summary with links: - [net-next] net: stmmac: clarify difference between "interface" and "phy_interface" https://git.kernel.org/netdev/net-next/c/a014c35556b9 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface" 2023-08-26 10:02 [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface" Russell King (Oracle) 2023-08-28 20:00 ` patchwork-bot+netdevbpf @ 2023-08-29 12:38 ` Alexander Stein 2023-08-29 13:10 ` Russell King (Oracle) 1 sibling, 1 reply; 5+ messages in thread From: Alexander Stein @ 2023-08-29 12:38 UTC (permalink / raw) To: Russell King (Oracle) Cc: Alexandre Torgue, Jose Abreu, Andrew Lunn, David S. Miller, Eric Dumazet, Feiyang Chen, Heiner Kallweit, Jakub Kicinski, linux-arm-kernel, linux-stm32, Maxime Coquelin, netdev, Paolo Abeni, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Vladimir Zapolskiy, Emil Renner Berthing, Samin Guo, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Matthias Brugger, AngeloGioacchino Del Regno, linux-sunxi, linux-mediatek Hi Russel, Am Samstag, 26. August 2023, 12:02:51 CEST schrieb Russell King (Oracle): > Clarify the difference between "interface" and "phy_interface" in > struct plat_stmmacenet_data, both by adding a comment, and also > renaming "interface" to be "mac_interface". The difference between > these are: > > MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media > ^ ^ > mac_interface phy_interface > > Note that phylink currently only deals with phy_interface. > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > --- > > One last patch before Sunday - I would like to get this merged as it > touches multiple stmmac platforms before any further are added. > > This patch merely renames the "plat_dat->interface" to "->mac_interface" > but doesn't change which any code uses. > > All code which uses plat->interface (now plat->mac_interface) are > determining the interface from the MAC side not the PHY side. These > need a code review against the docs to check whether that is correct. > Essentially, every .c file touched by this needs a code review. This > code review should not affect whether this patch is merged. > > .../net/ethernet/stmicro/stmmac/dwmac-imx.c | 14 ++++++------- > .../ethernet/stmicro/stmmac/dwmac-ingenic.c | 20 +++++++++---------- > .../ethernet/stmicro/stmmac/dwmac-loongson.c | 2 +- > .../ethernet/stmicro/stmmac/dwmac-lpc18xx.c | 4 ++-- > .../ethernet/stmicro/stmmac/dwmac-mediatek.c | 2 +- > .../ethernet/stmicro/stmmac/dwmac-socfpga.c | 2 +- > .../ethernet/stmicro/stmmac/dwmac-starfive.c | 4 ++-- > .../net/ethernet/stmicro/stmmac/dwmac-stm32.c | 8 ++++---- > .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 6 +++--- > .../net/ethernet/stmicro/stmmac/stmmac_main.c | 6 ++++-- > .../ethernet/stmicro/stmmac/stmmac_platform.c | 6 +++--- > include/linux/stmmac.h | 15 +++++++++++++- > 12 files changed, 52 insertions(+), 37 deletions(-) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c index > 535856fffaea..df34e34cc14f 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c > @@ -70,7 +70,7 @@ static int imx8mp_set_intf_mode(struct > plat_stmmacenet_data *plat_dat) struct imx_priv_data *dwmac = > plat_dat->bsp_priv; > int val; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_MII: > val = GPR_ENET_QOS_INTF_SEL_MII; > break; > @@ -87,7 +87,7 @@ static int imx8mp_set_intf_mode(struct > plat_stmmacenet_data *plat_dat) break; > default: > pr_debug("imx dwmac doesn't support %d interface\n", > - plat_dat->interface); > + plat_dat->mac_interface); > return -EINVAL; > } > > @@ -110,7 +110,7 @@ static int imx93_set_intf_mode(struct > plat_stmmacenet_data *plat_dat) struct imx_priv_data *dwmac = > plat_dat->bsp_priv; > int val; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_MII: > val = MX93_GPR_ENET_QOS_INTF_SEL_MII; > break; > @@ -125,7 +125,7 @@ static int imx93_set_intf_mode(struct > plat_stmmacenet_data *plat_dat) break; > default: > dev_dbg(dwmac->dev, "imx dwmac doesn't support %d interface\n", > - plat_dat->interface); > + plat_dat->mac_interface); > return -EINVAL; > } > > @@ -192,8 +192,8 @@ static void imx_dwmac_fix_speed(void *priv, unsigned int > speed, unsigned int mod plat_dat = dwmac->plat_dat; > > if (dwmac->ops->mac_rgmii_txclk_auto_adj || > - (plat_dat->interface == PHY_INTERFACE_MODE_RMII) || > - (plat_dat->interface == PHY_INTERFACE_MODE_MII)) > + (plat_dat->mac_interface == PHY_INTERFACE_MODE_RMII) || > + (plat_dat->mac_interface == PHY_INTERFACE_MODE_MII)) > return; > > switch (speed) { > @@ -260,7 +260,7 @@ static int imx_dwmac_mx93_reset(void *priv, void __iomem > *ioaddr) value |= DMA_BUS_MODE_SFT_RESET; > writel(value, ioaddr + DMA_BUS_MODE); > > - if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) { > + if (plat_dat->mac_interface == PHY_INTERFACE_MODE_RMII) { > usleep_range(100, 200); > writel(RMII_RESET_SPEED, ioaddr + MAC_CTRL_REG); > } > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c index > e22ef0d6bc73..0a20c3d24722 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c > @@ -89,7 +89,7 @@ static int jz4775_mac_set_mode(struct plat_stmmacenet_data > *plat_dat) struct ingenic_mac *mac = plat_dat->bsp_priv; > unsigned int val; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_MII: > val = FIELD_PREP(MACPHYC_TXCLK_SEL_MASK, MACPHYC_TXCLK_SEL_INPUT) | > FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_MII); > @@ -118,7 +118,7 @@ static int jz4775_mac_set_mode(struct > plat_stmmacenet_data *plat_dat) break; > > default: > - dev_err(mac->dev, "Unsupported interface %d", plat_dat- >interface); > + dev_err(mac->dev, "Unsupported interface %d", plat_dat- >mac_interface); > return -EINVAL; > } > > @@ -130,13 +130,13 @@ static int x1000_mac_set_mode(struct > plat_stmmacenet_data *plat_dat) { > struct ingenic_mac *mac = plat_dat->bsp_priv; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_RMII: > dev_dbg(mac->dev, "MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n"); > break; > > default: > - dev_err(mac->dev, "Unsupported interface %d", plat_dat- >interface); > + dev_err(mac->dev, "Unsupported interface %d", plat_dat- >mac_interface); > return -EINVAL; > } > > @@ -149,14 +149,14 @@ static int x1600_mac_set_mode(struct > plat_stmmacenet_data *plat_dat) struct ingenic_mac *mac = > plat_dat->bsp_priv; > unsigned int val; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_RMII: > val = FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII); > dev_dbg(mac->dev, "MAC PHY Control Register: PHY_INTERFACE_MODE_RMII\n"); > break; > > default: > - dev_err(mac->dev, "Unsupported interface %d", plat_dat- >interface); > + dev_err(mac->dev, "Unsupported interface %d", plat_dat- >mac_interface); > return -EINVAL; > } > > @@ -169,7 +169,7 @@ static int x1830_mac_set_mode(struct > plat_stmmacenet_data *plat_dat) struct ingenic_mac *mac = > plat_dat->bsp_priv; > unsigned int val; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_RMII: > val = FIELD_PREP(MACPHYC_MODE_SEL_MASK, MACPHYC_MODE_SEL_RMII) | > FIELD_PREP(MACPHYC_PHY_INFT_MASK, MACPHYC_PHY_INFT_RMII); > @@ -177,7 +177,7 @@ static int x1830_mac_set_mode(struct > plat_stmmacenet_data *plat_dat) break; > > default: > - dev_err(mac->dev, "Unsupported interface %d", plat_dat- >interface); > + dev_err(mac->dev, "Unsupported interface %d", plat_dat- >mac_interface); > return -EINVAL; > } > > @@ -190,7 +190,7 @@ static int x2000_mac_set_mode(struct > plat_stmmacenet_data *plat_dat) struct ingenic_mac *mac = > plat_dat->bsp_priv; > unsigned int val; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_RMII: > val = FIELD_PREP(MACPHYC_TX_SEL_MASK, MACPHYC_TX_SEL_ORIGIN) | > FIELD_PREP(MACPHYC_RX_SEL_MASK, MACPHYC_RX_SEL_ORIGIN) | > @@ -220,7 +220,7 @@ static int x2000_mac_set_mode(struct > plat_stmmacenet_data *plat_dat) break; > > default: > - dev_err(mac->dev, "Unsupported interface %d", plat_dat- >interface); > + dev_err(mac->dev, "Unsupported interface %d", plat_dat- >mac_interface); > return -EINVAL; > } > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index > a25c187d3185..2cd6fce5c993 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c > @@ -117,7 +117,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, > const struct pci_device_id } > > plat->phy_interface = phy_mode; > - plat->interface = PHY_INTERFACE_MODE_GMII; > + plat->mac_interface = PHY_INTERFACE_MODE_GMII; > > pci_set_master(pdev); > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c index > 18e84ba693a6..d0aa674ce705 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c > @@ -50,9 +50,9 @@ static int lpc18xx_dwmac_probe(struct platform_device > *pdev) goto err_remove_config_dt; > } > > - if (plat_dat->interface == PHY_INTERFACE_MODE_MII) { > + if (plat_dat->mac_interface == PHY_INTERFACE_MODE_MII) { > ethmode = LPC18XX_CREG_CREG6_ETHMODE_MII; > - } else if (plat_dat->interface == PHY_INTERFACE_MODE_RMII) { > + } else if (plat_dat->mac_interface == PHY_INTERFACE_MODE_RMII) { > ethmode = LPC18XX_CREG_CREG6_ETHMODE_RMII; > } else { > dev_err(&pdev->dev, "Only MII and RMII mode supported\n"); > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c index > 7580077383c0..cd796ec04132 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c > @@ -587,7 +587,7 @@ static int mediatek_dwmac_common_data(struct > platform_device *pdev, { > int i; > > - plat->interface = priv_plat->phy_mode; > + plat->mac_interface = priv_plat->phy_mode; > if (priv_plat->mac_wol) > plat->flags |= STMMAC_FLAG_USE_PHY_WOL; > else > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c index > 7db176e8691f..9bf102bbc6a0 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c > @@ -236,7 +236,7 @@ static int socfpga_get_plat_phymode(struct socfpga_dwmac > *dwmac) struct net_device *ndev = dev_get_drvdata(dwmac->dev); > struct stmmac_priv *priv = netdev_priv(ndev); > > - return priv->plat->interface; > + return priv->plat->mac_interface; > } > > static void socfpga_sgmii_config(struct socfpga_dwmac *dwmac, bool enable) > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c index > 892612564694..9289bb87c3e3 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-starfive.c > @@ -60,7 +60,7 @@ static int starfive_dwmac_set_mode(struct > plat_stmmacenet_data *plat_dat) unsigned int mode; > int err; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_RMII: > mode = STARFIVE_DWMAC_PHY_INFT_RMII; > break; > @@ -72,7 +72,7 @@ static int starfive_dwmac_set_mode(struct > plat_stmmacenet_data *plat_dat) > > default: > dev_err(dwmac->dev, "unsupported interface %d\n", > - plat_dat->interface); > + plat_dat->mac_interface); > return -EINVAL; > } > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c index > 3a09085819dc..26ea8c687881 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c > @@ -171,7 +171,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data > *plat_dat) > > clk_rate = clk_get_rate(dwmac->clk_eth_ck); > dwmac->enable_eth_ck = false; > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_MII: > if (clk_rate == ETH_CK_F_25M && dwmac->ext_phyclk) > dwmac->enable_eth_ck = true; > @@ -210,7 +210,7 @@ static int stm32mp1_set_mode(struct plat_stmmacenet_data > *plat_dat) break; > default: > pr_debug("SYSCFG init : Do not manage %d interface\n", > - plat_dat->interface); > + plat_dat->mac_interface); > /* Do not manage others interfaces */ > return -EINVAL; > } > @@ -230,7 +230,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data > *plat_dat) u32 reg = dwmac->mode_reg; > int val; > > - switch (plat_dat->interface) { > + switch (plat_dat->mac_interface) { > case PHY_INTERFACE_MODE_MII: > val = SYSCFG_MCU_ETH_SEL_MII; > pr_debug("SYSCFG init : PHY_INTERFACE_MODE_MII\n"); > @@ -241,7 +241,7 @@ static int stm32mcu_set_mode(struct plat_stmmacenet_data > *plat_dat) break; > default: > pr_debug("SYSCFG init : Do not manage %d interface\n", > - plat_dat->interface); > + plat_dat->mac_interface); > /* Do not manage others interfaces */ > return -EINVAL; > } > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c > b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index > c23420863a8d..01e77368eef1 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c > @@ -1016,7 +1016,7 @@ static int sun8i_dwmac_set_syscon(struct device *dev, > if (gmac->variant->support_rmii) > reg &= ~SYSCON_RMII_EN; > > - switch (plat->interface) { > + switch (plat->mac_interface) { > case PHY_INTERFACE_MODE_MII: > /* default */ > break; > @@ -1031,7 +1031,7 @@ static int sun8i_dwmac_set_syscon(struct device *dev, > break; > default: > dev_err(dev, "Unsupported interface mode: %s", > - phy_modes(plat->interface)); > + phy_modes(plat->mac_interface)); > return -EINVAL; > } > > @@ -1231,7 +1231,7 @@ static int sun8i_dwmac_probe(struct platform_device > *pdev) /* platform data specifying hardware features and callbacks. > * hardware features were copied from Allwinner drivers. > */ > - plat_dat->interface = interface; > + plat_dat->mac_interface = interface; > plat_dat->rx_coe = STMMAC_RX_COE_TYPE2; > plat_dat->tx_coe = 1; > plat_dat->flags |= STMMAC_FLAG_HAS_SUN8I; > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index > e52ae165c968..c92bab6e2341 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c > @@ -1119,7 +1119,7 @@ static const struct phylink_mac_ops > stmmac_phylink_mac_ops = { */ > static void stmmac_check_pcs_mode(struct stmmac_priv *priv) > { > - int interface = priv->plat->interface; > + int interface = priv->plat->mac_interface; > > if (priv->dma_cap.pcs) { > if ((interface == PHY_INTERFACE_MODE_RGMII) || > @@ -1214,7 +1214,9 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) > priv->phylink_config.ovr_an_inband = > mdio_bus_data->xpcs_an_inband; > > - /* Set the platform/firmware specified interface mode */ > + /* Set the platform/firmware specified interface mode. Note, phylink > + * deals with the PHY interface mode, not the MAC interface mode. > + */ > __set_bit(mode, priv->phylink_config.supported_interfaces); > > /* If we have an xpcs, it defines which PHY interfaces are supported. */ > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index > ff330423ee66..35f4b1484029 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > @@ -419,9 +419,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 > *mac) return ERR_PTR(phy_mode); > > plat->phy_interface = phy_mode; > - plat->interface = stmmac_of_get_mac_mode(np); > - if (plat->interface < 0) > - plat->interface = plat->phy_interface; > + plat->mac_interface = stmmac_of_get_mac_mode(np); > + if (plat->mac_interface < 0) This check is never true as mac_interface is now an unsigned enum (phy_interface_t). Thus mac_interface is not set to phy_interface resulting in an invalid mac_interface. My platform (arch/arm64/boot/dts/freescale/imx8mp- tqma8mpql-mba8mpxl.dts) fails to probe now. Best regards, Alexander > + plat->mac_interface = plat->phy_interface; > > /* Some wrapper drivers still rely on phy_node. Let's save it while > * they are not converted to phylink. */ > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h > index b2ccd827bb80..ce89cc3e4913 100644 > --- a/include/linux/stmmac.h > +++ b/include/linux/stmmac.h > @@ -223,7 +223,20 @@ struct dwmac4_addrs { > struct plat_stmmacenet_data { > int bus_id; > int phy_addr; > - int interface; > + /* MAC ----- optional PCS ----- SerDes ----- optional PHY ----- Media > + * ^ ^ > + * mac_interface phy_interface > + * > + * mac_interface is the MAC-side interface, which may be the same > + * as phy_interface if there is no intervening PCS. If there is a > + * PCS, then mac_interface describes the interface mode between the > + * MAC and PCS, and phy_interface describes the interface mode > + * between the PCS and PHY. > + */ > + phy_interface_t mac_interface; > + /* phy_interface is the PHY-side interface - the interface used by > + * an attached PHY. > + */ > phy_interface_t phy_interface; > struct stmmac_mdio_bus_data *mdio_bus_data; > struct device_node *phy_node; -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider http://www.tq-group.com/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface" 2023-08-29 12:38 ` Alexander Stein @ 2023-08-29 13:10 ` Russell King (Oracle) 2023-08-29 13:20 ` Alexander Stein 0 siblings, 1 reply; 5+ messages in thread From: Russell King (Oracle) @ 2023-08-29 13:10 UTC (permalink / raw) To: Alexander Stein Cc: Alexandre Torgue, Jose Abreu, Andrew Lunn, David S. Miller, Eric Dumazet, Feiyang Chen, Heiner Kallweit, Jakub Kicinski, linux-arm-kernel, linux-stm32, Maxime Coquelin, netdev, Paolo Abeni, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Vladimir Zapolskiy, Emil Renner Berthing, Samin Guo, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Matthias Brugger, AngeloGioacchino Del Regno, linux-sunxi, linux-mediatek On Tue, Aug 29, 2023 at 02:38:33PM +0200, Alexander Stein wrote: > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index > > ff330423ee66..35f4b1484029 100644 > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > > @@ -419,9 +419,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 > > *mac) return ERR_PTR(phy_mode); > > > > plat->phy_interface = phy_mode; > > - plat->interface = stmmac_of_get_mac_mode(np); > > - if (plat->interface < 0) > > - plat->interface = plat->phy_interface; > > + plat->mac_interface = stmmac_of_get_mac_mode(np); > > + if (plat->mac_interface < 0) > > This check is never true as mac_interface is now an unsigned enum > (phy_interface_t). Thus mac_interface is not set to phy_interface resulting in > an invalid mac_interface. My platform (arch/arm64/boot/dts/freescale/imx8mp- > tqma8mpql-mba8mpxl.dts) fails to probe now. Thanks for catching that. Does this patch fix it for you? diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 231152ee5a32..0451d2c2aa43 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -420,9 +420,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac) return ERR_PTR(phy_mode); plat->phy_interface = phy_mode; - plat->interface = stmmac_of_get_mac_mode(np); - if (plat->interface < 0) - plat->interface = plat->phy_interface; + + rc = stmmac_of_get_mac_mode(np); + plat->interface = rc < 0 ? plat->phy_interface : rc; /* Some wrapper drivers still rely on phy_node. Let's save it while * they are not converted to phylink. */ -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last! _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface" 2023-08-29 13:10 ` Russell King (Oracle) @ 2023-08-29 13:20 ` Alexander Stein 0 siblings, 0 replies; 5+ messages in thread From: Alexander Stein @ 2023-08-29 13:20 UTC (permalink / raw) To: Russell King (Oracle) Cc: Alexandre Torgue, Jose Abreu, Andrew Lunn, David S. Miller, Eric Dumazet, Feiyang Chen, Heiner Kallweit, Jakub Kicinski, linux-arm-kernel, linux-stm32, Maxime Coquelin, netdev, Paolo Abeni, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Vladimir Zapolskiy, Emil Renner Berthing, Samin Guo, Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Matthias Brugger, AngeloGioacchino Del Regno, linux-sunxi, linux-mediatek Am Dienstag, 29. August 2023, 15:10:40 CEST schrieb Russell King (Oracle): > On Tue, Aug 29, 2023 at 02:38:33PM +0200, Alexander Stein wrote: > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index > > > ff330423ee66..35f4b1484029 100644 > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > > > @@ -419,9 +419,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, > > > u8 > > > *mac) return ERR_PTR(phy_mode); > > > > > > plat->phy_interface = phy_mode; > > > > > > - plat->interface = stmmac_of_get_mac_mode(np); > > > - if (plat->interface < 0) > > > - plat->interface = plat->phy_interface; > > > + plat->mac_interface = stmmac_of_get_mac_mode(np); > > > + if (plat->mac_interface < 0) > > > > This check is never true as mac_interface is now an unsigned enum > > (phy_interface_t). Thus mac_interface is not set to phy_interface > > resulting in an invalid mac_interface. My platform > > (arch/arm64/boot/dts/freescale/imx8mp- tqma8mpql-mba8mpxl.dts) fails to > > probe now. > > Thanks for catching that. Does this patch fix it for you? > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index > 231152ee5a32..0451d2c2aa43 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c > @@ -420,9 +420,9 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 > *mac) return ERR_PTR(phy_mode); > > plat->phy_interface = phy_mode; > - plat->interface = stmmac_of_get_mac_mode(np); > - if (plat->interface < 0) > - plat->interface = plat->phy_interface; > + > + rc = stmmac_of_get_mac_mode(np); > + plat->interface = rc < 0 ? plat->phy_interface : rc; I need to use plat->mac_interface on top of your patch. But despite that this fixes the probe error. Thanks and best regards, Alexander > > /* Some wrapper drivers still rely on phy_node. Let's save it while > * they are not converted to phylink. */ -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider http://www.tq-group.com/ _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2023-08-29 13:21 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-08-26 10:02 [PATCH net-next] net: stmmac: clarify difference between "interface" and "phy_interface" Russell King (Oracle) 2023-08-28 20:00 ` patchwork-bot+netdevbpf 2023-08-29 12:38 ` Alexander Stein 2023-08-29 13:10 ` Russell King (Oracle) 2023-08-29 13:20 ` Alexander Stein
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox