From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Alain Volmat <alain.volmat@foss.st.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Russell King <linux@armlinux.org.uk>,
Philipp Zabel <p.zabel@pengutronix.de>,
Dan Scally <dan.scally@ideasonboard.com>,
Hugues Fruchet <hugues.fruchet@foss.st.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 3/5] media: stm32-dcmipp: STM32 DCMIPP camera interface driver
Date: Thu, 26 Oct 2023 12:04:00 +0000 [thread overview]
Message-ID: <ZTpVsO9pHoPjF_JX@kekkonen.localdomain> (raw)
In-Reply-To: <20231026113610.GA26306@pendragon.ideasonboard.com>
On Thu, Oct 26, 2023 at 02:36:10PM +0300, Laurent Pinchart wrote:
> Hi Sakari,
>
> On Thu, Oct 26, 2023 at 11:11:53AM +0000, Sakari Ailus wrote:
> > On Tue, Oct 10, 2023 at 10:24:03AM +0200, Alain Volmat wrote:
> > > From: Hugues Fruchet <hugues.fruchet@foss.st.com>
> > >
> > > This V4L2 subdev driver enables Digital Camera Memory Interface
> > > Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series.
> > >
> > > Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
> > > Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
> > > ---
> > > drivers/media/platform/st/stm32/Kconfig | 15 +
> > > drivers/media/platform/st/stm32/Makefile | 1 +
> > > .../platform/st/stm32/stm32-dcmipp/Makefile | 4 +
> > > .../st/stm32/stm32-dcmipp/dcmipp-bytecap.c | 916 ++++++++++++++++++
> > > .../st/stm32/stm32-dcmipp/dcmipp-byteproc.c | 555 +++++++++++
> > > .../st/stm32/stm32-dcmipp/dcmipp-common.c | 106 ++
> > > .../st/stm32/stm32-dcmipp/dcmipp-common.h | 216 +++++
> > > .../st/stm32/stm32-dcmipp/dcmipp-core.c | 603 ++++++++++++
> > > .../st/stm32/stm32-dcmipp/dcmipp-parallel.c | 441 +++++++++
> > > 9 files changed, 2857 insertions(+)
> > > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/Makefile
> > > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
> > > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-byteproc.c
> > > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.c
> > > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-common.h
> > > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-core.c
> > > create mode 100644 drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-parallel.c
>
> [snip]
>
> > > diff --git a/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
> > > new file mode 100644
> > > index 000000000000..4f784c5791e7
> > > --- /dev/null
> > > +++ b/drivers/media/platform/st/stm32/stm32-dcmipp/dcmipp-bytecap.c
> > > @@ -0,0 +1,916 @@
>
> [snip]
>
> > > +static const struct dcmipp_bytecap_pix_map *
> > > +dcmipp_bytecap_pix_map_by_pixelformat(u32 pixelformat)
> > > +{
> > > + unsigned int i;
> > > +
> > > + for (i = 0; i < ARRAY_SIZE(dcmipp_bytecap_pix_map_list); i++) {
> >
> > No need for braces. Up to you.
>
> For what it's worth, I usually ask for braces in my reviews for these
> kind of cases :-)
Well, if you read the coding style document, you may find this, but people
don't interpret it as strictly anymore anyway. I think it's fine without.
--
Sakari Ailus
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-10-26 12:04 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-10 8:24 [PATCH v5 0/5] Add support for DCMIPP camera interface of STMicroelectronics STM32 SoC series Alain Volmat
2023-10-10 8:24 ` [PATCH v5 1/5] dt-bindings: media: add bindings for stm32 dcmipp Alain Volmat
2023-10-10 8:24 ` [PATCH v5 2/5] media: MAINTAINERS: add entry for STM32 DCMIPP driver Alain Volmat
2023-10-10 8:24 ` [PATCH v5 3/5] media: stm32-dcmipp: STM32 DCMIPP camera interface driver Alain Volmat
2023-10-26 11:11 ` Sakari Ailus
2023-10-26 11:36 ` Laurent Pinchart
2023-10-26 12:04 ` Sakari Ailus [this message]
2023-11-13 7:02 ` Alain Volmat
2023-10-10 8:24 ` [PATCH v5 4/5] ARM: dts: stm32: add dcmipp support to stm32mp135 Alain Volmat
2023-10-10 8:24 ` [PATCH v5 5/5] ARM: multi_v7_defconfig: enable STM32 DCMIPP media support Alain Volmat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZTpVsO9pHoPjF_JX@kekkonen.localdomain \
--to=sakari.ailus@linux.intel.com \
--cc=alain.volmat@foss.st.com \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=dan.scally@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=hugues.fruchet@foss.st.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@armlinux.org.uk \
--cc=mchehab@kernel.org \
--cc=mcoquelin.stm32@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox