From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org,
lorenzo.bianconi@redhat.com, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
nbd@nbd.name, john@phrozen.org, devicetree@vger.kernel.org,
dd@embedd.com, catalin.marinas@arm.com, will@kernel.org,
angelogioacchino.delregno@collabora.com
Subject: Re: [PATCH v2 2/4] arm64: dts: Add Airoha EN7581 SoC and EN7581 Evaluation Board
Date: Wed, 21 Feb 2024 11:30:44 +0100 [thread overview]
Message-ID: <ZdXQ1OXjjyWOzSWD@lore-desk> (raw)
In-Reply-To: <2e8e6a0a-44ce-45e4-8321-592f08852412@linaro.org>
[-- Attachment #1.1: Type: text/plain, Size: 5350 bytes --]
> On 21/02/2024 01:04, Lorenzo Bianconi wrote:
> > From: Daniel Danzberger <dd@embedd.com>
> >
> > Introduce the Airoha EN7581 SoC's dtsi and the Airoha EN7581 Evaluation
> > Board's dts file, as well as the required Makefiles.
> >
> > Signed-off-by: Daniel Danzberger <dd@embedd.com>
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> > arch/arm64/boot/dts/Makefile | 1 +
> > arch/arm64/boot/dts/airoha/Makefile | 2 +
> > arch/arm64/boot/dts/airoha/en7581-evb.dts | 27 +++++
> > arch/arm64/boot/dts/airoha/en7581.dtsi | 137 ++++++++++++++++++++++
> > 4 files changed, 167 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/airoha/Makefile
> > create mode 100644 arch/arm64/boot/dts/airoha/en7581-evb.dts
> > create mode 100644 arch/arm64/boot/dts/airoha/en7581.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> > index 30dd6347a929..21cd3a87f385 100644
> > --- a/arch/arm64/boot/dts/Makefile
> > +++ b/arch/arm64/boot/dts/Makefile
> > @@ -1,5 +1,6 @@
> > # SPDX-License-Identifier: GPL-2.0
> > subdir-y += actions
> > +subdir-y += airoha
> > subdir-y += allwinner
> > subdir-y += altera
> > subdir-y += amazon
> > diff --git a/arch/arm64/boot/dts/airoha/Makefile b/arch/arm64/boot/dts/airoha/Makefile
> > new file mode 100644
> > index 000000000000..ebea112ce1d7
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/airoha/Makefile
> > @@ -0,0 +1,2 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +dtb-$(CONFIG_ARCH_AIROHA) += en7581-evb.dtb
> > diff --git a/arch/arm64/boot/dts/airoha/en7581-evb.dts b/arch/arm64/boot/dts/airoha/en7581-evb.dts
> > new file mode 100644
> > index 000000000000..4eaa8ac431c3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/airoha/en7581-evb.dts
> > @@ -0,0 +1,27 @@
> > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +/dts-v1/;
> > +
> > +/* Bootloader installs ATF here */
> > +/memreserve/ 0x80000000 0x200000;
> > +
> > +#include "en7581.dtsi"
> > +
> > +/ {
> > + model = "Airoha EN7581 Evaluation Board";
> > + compatible = "airoha,en7581-evb", "airoha,en7581";
> > +
> > + aliases {
> > + serial0 = &uart1;
> > + };
> > +
> > + chosen {
> > + bootargs = "console=ttyS0,115200 earlycon";
>
> You have console below. You don't need earlycon for mainline, broad
> usage, because it is purely debugging part, so drop entire bootargs.
ack, I will fix it in v3.
>
> > + stdout-path = "serial0:115200n8";
> > + linux,usable-memory-range = <0x0 0x80200000 0x0 0x1fe00000>;
> > + };
> > +
> > + memory@80000000 {
> > + device_type = "memory";
> > + reg = <0x0 0x80000000 0x2 0x00000000>;
> > + };
> > +};
> > diff --git a/arch/arm64/boot/dts/airoha/en7581.dtsi b/arch/arm64/boot/dts/airoha/en7581.dtsi
> > new file mode 100644
> > index 000000000000..7a3c0a45c03f
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/airoha/en7581.dtsi
> > @@ -0,0 +1,137 @@
> > +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +/ {
> > + interrupt-parent = <&gic>;
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > +
> > + reserved-memory {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + ranges;
> > +
> > + npu_binary@84000000 {
>
> No underscores in nodenames.
> ...
>
ack, I will fix it in v3.
> > +
> > + L2_0: l2-cache0 {
>
> Nodename: l2-cache
>
ack, I will fix it in v3.
> > + compatible = "cache";
> > + cache-level = <2>;
> > + cache-unified;
> > + };
> > + };
> > +
> > + gic: interrupt-controller@9000000 {
>
> Why this is outside of SoC? Where is your SoC node BTW?
ack, I will fix it in v3.
>
> It does not look like you tested the DTS against bindings. Please run
> `make dtbs_check W=1` (see
> Documentation/devicetree/bindings/writing-schema.rst or
> https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
> for instructions).
>
> > + compatible = "arm,gic-v3";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + reg = <0x0 0x09000000 0x0 0x20000>,
> > + <0x0 0x09080000 0x0 0x80000>,
> > + <0x0 0x09400000 0x0 0x2000>,
> > + <0x0 0x09500000 0x0 0x2000>,
> > + <0x0 0x09600000 0x0 0x20000>;
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv8-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
> > + };
> > +
> > + uart1: serial@1fbf0000 {
>
> This cannot be outside of SoC.
ack, I will fix it in v3.
>
> > + compatible = "ns16550";
> > + reg = <0x0 0x1fbf0000 0x0 0x30>;
> > + reg-io-width = <4>;
> > + reg-shift = <2>;
> > + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> > + clock-frequency = <1843200>;
> > + status = "okay";
>
> Drop
ack, I will fix it in v3.
Regards,
Lorenzo
>
>
> Best regards,
> Krzysztof
>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
[-- Attachment #2: Type: text/plain, Size: 176 bytes --]
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-21 10:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 0:04 [PATCH v2 0/4] arm64: Add support for Airoha EN7581 Soc Lorenzo Bianconi
2024-02-21 0:04 ` [PATCH v2 1/4] dt-bindings: arm64: dts: airoha: Add en7581 series Lorenzo Bianconi
2024-02-21 7:43 ` Krzysztof Kozlowski
2024-02-21 0:04 ` [PATCH v2 2/4] arm64: dts: Add Airoha EN7581 SoC and EN7581 Evaluation Board Lorenzo Bianconi
2024-02-21 7:45 ` Krzysztof Kozlowski
2024-02-21 10:30 ` Lorenzo Bianconi [this message]
2024-02-21 9:54 ` AngeloGioacchino Del Regno
2024-02-21 17:36 ` Lorenzo Bianconi
2024-02-21 0:04 ` [PATCH v2 3/4] arm64: add Airoha EN7581 platform Lorenzo Bianconi
2024-02-21 0:04 ` [PATCH v2 4/4] arm64: defconfig: enable Airoha platform Lorenzo Bianconi
2024-02-21 7:46 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZdXQ1OXjjyWOzSWD@lore-desk \
--to=lorenzo@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=dd@embedd.com \
--cc=devicetree@vger.kernel.org \
--cc=john@phrozen.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=nbd@nbd.name \
--cc=robh+dt@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).