From: Frank Li <Frank.li@nxp.com>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: bhelgaas@google.com, cassel@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, festevam@gmail.com,
helgaas@kernel.org, hongxing.zhu@nxp.com, imx@lists.linux.dev,
kernel@pengutronix.de, krzysztof.kozlowski+dt@linaro.org,
krzysztof.kozlowski@linaro.org, kw@linux.com,
l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-imx@nxp.com, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, manivannan.sadhasivam@linaro.org,
robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v11 10/14] PCI: imx6: Add iMX95 PCIe Root Complex support
Date: Wed, 21 Feb 2024 10:36:17 -0500 [thread overview]
Message-ID: <ZdYYcf2fOkwl3oiM@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <ZdXTof/fSOuBw4MW@lpieralisi>
On Wed, Feb 21, 2024 at 11:42:41AM +0100, Lorenzo Pieralisi wrote:
> On Tue, Feb 20, 2024 at 11:19:20AM -0500, Frank Li wrote:
> > Add iMX95 PCIe Root Complex support.
> >
> > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> >
> > Notes:
> > Change from v8 to v9
> > - Add mani's review tag
> >
> > Change from v7 to v8
> > - Update commit subject
> > - add const from regmap
> > - remove unnessary logic in imx6_pcie_deassert_core_reset()
> >
> > Change from v4 to v7
> > - none
> > Change from v1 to v3
> > - none
> >
> > drivers/pci/controller/dwc/pci-imx6.c | 82 +++++++++++++++++++++++++--
> > 1 file changed, 77 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > index 71ce6b7ac1de0..582ba00d628a1 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -42,6 +42,25 @@
> > #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
> > #define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
> >
> > +#define IMX95_PCIE_PHY_GEN_CTRL 0x0
> > +#define IMX95_PCIE_REF_USE_PAD BIT(17)
> > +
> > +#define IMX95_PCIE_PHY_MPLLA_CTRL 0x10
> > +#define IMX95_PCIE_PHY_MPLL_STATE BIT(30)
>
> These two defines are unused, I will remove them.
>
> > +#define IMX95_PCIE_SS_RW_REG_0 0xf0
> > +#define IMX95_PCIE_REF_CLKEN BIT(23)
> > +#define IMX95_PCIE_PHY_CR_PARA_SEL BIT(9)
> > +
> > +#define IMX95_PE0_GEN_CTRL_1 0x1050
> > +#define IMX95_PCIE_DEVICE_TYPE GENMASK(3, 0)
> > +
> > +#define IMX95_PE0_GEN_CTRL_3 0x1058
> > +#define IMX95_PCIE_LTSSM_EN BIT(0)
> > +
> > +#define IMX95_PE0_PM_STS 0x1064
> > +#define IMX95_PCIE_PM_LINKST_IN_L2 BIT(14)
>
> These two defines are unused. I will remove them.
Thanks.
let me know if need me send out revised patches.
Frank
>
> > +
> > #define to_imx6_pcie(x) dev_get_drvdata((x)->dev)
> >
> > enum imx6_pcie_variants {
> > @@ -52,6 +71,7 @@ enum imx6_pcie_variants {
> > IMX8MQ,
> > IMX8MM,
> > IMX8MP,
> > + IMX95,
> > IMX8MQ_EP,
> > IMX8MM_EP,
> > IMX8MP_EP,
> > @@ -63,6 +83,7 @@ enum imx6_pcie_variants {
> > #define IMX6_PCIE_FLAG_HAS_PHYDRV BIT(3)
> > #define IMX6_PCIE_FLAG_HAS_APP_RESET BIT(4)
> > #define IMX6_PCIE_FLAG_HAS_PHY_RESET BIT(5)
> > +#define IMX6_PCIE_FLAG_HAS_SERDES BIT(6)
> >
> > #define imx6_check_flag(pci, val) (pci->drvdata->flags & val)
> >
> > @@ -179,6 +200,24 @@ static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
> > return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
> > }
> >
> > +static int imx95_pcie_init_phy(struct imx6_pcie *imx6_pcie)
> > +{
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr,
> > + IMX95_PCIE_SS_RW_REG_0,
> > + IMX95_PCIE_PHY_CR_PARA_SEL,
> > + IMX95_PCIE_PHY_CR_PARA_SEL);
> > +
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr,
> > + IMX95_PCIE_PHY_GEN_CTRL,
> > + IMX95_PCIE_REF_USE_PAD, 0);
> > + regmap_update_bits(imx6_pcie->iomuxc_gpr,
> > + IMX95_PCIE_SS_RW_REG_0,
> > + IMX95_PCIE_REF_CLKEN,
> > + IMX95_PCIE_REF_CLKEN);
> > +
> > + return 0;
> > +}
> > +
> > static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
> > {
> > const struct imx6_pcie_drvdata *drvdata = imx6_pcie->drvdata;
> > @@ -575,6 +614,7 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
> > IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
> > break;
> > case IMX7D:
> > + case IMX95:
> > break;
> > case IMX8MM:
> > case IMX8MM_EP:
> > @@ -1279,12 +1319,32 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> > return PTR_ERR(imx6_pcie->turnoff_reset);
> > }
> >
> > + if (imx6_pcie->drvdata->gpr) {
> > /* Grab GPR config register range */
> > - imx6_pcie->iomuxc_gpr =
> > - syscon_regmap_lookup_by_compatible(imx6_pcie->drvdata->gpr);
> > - if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
> > - dev_err(dev, "unable to find iomuxc registers\n");
> > - return PTR_ERR(imx6_pcie->iomuxc_gpr);
> > + imx6_pcie->iomuxc_gpr =
> > + syscon_regmap_lookup_by_compatible(imx6_pcie->drvdata->gpr);
> > + if (IS_ERR(imx6_pcie->iomuxc_gpr))
> > + return dev_err_probe(dev, PTR_ERR(imx6_pcie->iomuxc_gpr),
> > + "unable to find iomuxc registers\n");
> > + }
> > +
> > + if (imx6_check_flag(imx6_pcie, IMX6_PCIE_FLAG_HAS_SERDES)) {
> > + void __iomem *off = devm_platform_ioremap_resource_byname(pdev, "app");
> > +
> > + if (IS_ERR(off))
> > + return dev_err_probe(dev, PTR_ERR(off),
> > + "unable to find serdes registers\n");
> > +
> > + static const struct regmap_config regmap_config = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 4,
> > + };
> > +
> > + imx6_pcie->iomuxc_gpr = devm_regmap_init_mmio(dev, off, ®map_config);
> > + if (IS_ERR(imx6_pcie->iomuxc_gpr))
> > + return dev_err_probe(dev, PTR_ERR(imx6_pcie->iomuxc_gpr),
> > + "unable to find iomuxc registers\n");
> > }
> >
> > /* Grab PCIe PHY Tx Settings */
> > @@ -1457,6 +1517,17 @@ static const struct imx6_pcie_drvdata drvdata[] = {
> > .mode_off[0] = IOMUXC_GPR12,
> > .mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
> > },
> > + [IMX95] = {
> > + .variant = IMX95,
> > + .flags = IMX6_PCIE_FLAG_HAS_SERDES,
> > + .clk_names = imx8mq_clks,
> > + .clks_cnt = ARRAY_SIZE(imx8mq_clks),
> > + .ltssm_off = IMX95_PE0_GEN_CTRL_3,
> > + .ltssm_mask = IMX95_PCIE_LTSSM_EN,
> > + .mode_off[0] = IMX95_PE0_GEN_CTRL_1,
> > + .mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
> > + .init_phy = imx95_pcie_init_phy,
> > + },
> > [IMX8MQ_EP] = {
> > .variant = IMX8MQ_EP,
> > .flags = IMX6_PCIE_FLAG_HAS_APP_RESET |
> > @@ -1501,6 +1572,7 @@ static const struct of_device_id imx6_pcie_of_match[] = {
> > { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
> > { .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
> > { .compatible = "fsl,imx8mp-pcie", .data = &drvdata[IMX8MP], },
> > + { .compatible = "fsl,imx95-pcie", .data = &drvdata[IMX95], },
> > { .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
> > { .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
> > { .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
> > --
> > 2.34.1
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2024-02-21 15:36 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-20 16:19 [PATCH v11 00/14] PCI: imx6: Clean up and add imx95 pci support Frank Li
2024-02-20 16:19 ` [PATCH v11 01/14] PCI: imx6: Simplify clock handling by using clk_bulk*() function Frank Li
2024-02-20 16:19 ` [PATCH v11 02/14] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV Frank Li
2024-02-20 16:19 ` [PATCH v11 03/14] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET Frank Li
2024-02-20 16:19 ` [PATCH v11 04/14] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask Frank Li
2024-02-20 16:19 ` [PATCH v11 05/14] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask Frank Li
2024-02-20 16:19 ` [PATCH v11 06/14] PCI: imx6: Simplify switch-case logic by involve init_phy callback Frank Li
2024-02-20 16:19 ` [PATCH v11 07/14] dt-bindings: imx6q-pcie: Clean up irrationality clocks check Frank Li
2024-02-21 10:49 ` Lorenzo Pieralisi
2024-02-21 15:33 ` Frank Li
2024-02-20 16:19 ` [PATCH v11 08/14] dt-bindings: imx6q-pcie: Restruct reg and reg-name Frank Li
2024-02-20 16:19 ` [PATCH v11 09/14] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string Frank Li
2024-02-20 16:19 ` [PATCH v11 10/14] PCI: imx6: Add iMX95 PCIe Root Complex support Frank Li
2024-02-21 10:42 ` Lorenzo Pieralisi
2024-02-21 15:36 ` Frank Li [this message]
2024-02-20 16:19 ` [PATCH v11 11/14] PCI: imx6: Clean up get addr_space code Frank Li
2024-02-20 16:19 ` [PATCH v11 12/14] PCI: imx6: Add epc_features in imx6_pcie_drvdata Frank Li
2024-02-20 16:19 ` [PATCH v11 13/14] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string Frank Li
2024-02-20 16:19 ` [PATCH v11 14/14] PCI: imx6: Add iMX95 Endpoint (EP) support Frank Li
2024-02-23 15:23 ` [PATCH v11 00/14] PCI: imx6: Clean up and add imx95 pci support Lorenzo Pieralisi
2024-02-23 15:30 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZdYYcf2fOkwl3oiM@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=cassel@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox