Re: Lockdep-RCU splat in ARM CPU hotplug

["Russell King (Oracle)" <linux@armlinux.org.uk>]

On Tue, Mar 05, 2024 at 05:00:06PM +0100, Stefan Wiehler wrote:
> Hi,
> 
> With CONFIG_PROVE_RCU_LIST=y and by executing
> 
>   $ echo 0 > /sys/devices/system/cpu/cpu1/online
> 
> one can trigger the following Lockdep-RCU splat on ARM (reproducible on an Orange Pi PC in QEMU):
> 
>   =============================
>   WARNING: suspicious RCU usage
>   6.8.0-rc7-00001-g0db1d0ed8958 #10 Not tainted
>   -----------------------------
>   kernel/locking/lockdep.c:3762 RCU-list traversed in non-reader section!!
>  
>   other info that might help us debug this:
>  
>  
>   RCU used illegally from offline CPU!
>   rcu_scheduler_active = 2, debug_locks = 1
>   no locks held by swapper/1/0.
>  
>   stack backtrace:
>   CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0-rc7-00001-g0db1d0ed8958 #10
>   Hardware name: Allwinner sun8i Family
>    unwind_backtrace from show_stack+0x10/0x14
>    show_stack from dump_stack_lvl+0x60/0x90
>    dump_stack_lvl from lockdep_rcu_suspicious+0x150/0x1a0
>    lockdep_rcu_suspicious from __lock_acquire+0x11fc/0x29f8
>    __lock_acquire from lock_acquire+0x10c/0x348
>    lock_acquire from _raw_spin_lock_irqsave+0x50/0x6c
>    _raw_spin_lock_irqsave from check_and_switch_context+0x7c/0x4a8
>    check_and_switch_context from arch_cpu_idle_dead+0x10/0x7c
>    arch_cpu_idle_dead from do_idle+0xbc/0x138
>    do_idle from cpu_startup_entry+0x28/0x2c
>    cpu_startup_entry from secondary_start_kernel+0x11c/0x124
>    secondary_start_kernel from 0x401018a0
> 
> Originally the splat was found on an AXM5516 with v5.15, so the issue presumably exists for quite some time already on all ARM boards.
> 
> Lockdep-RCU is triggered by this call of raw_spin_lock_irqsave() in check_and_switch_context() while the CPU is already marked offline: https://elixir.bootlin.com/linux/v6.8-rc7/source/arch/arm/mm/context.c#L257
> 
> On ARM64, we have cpu_die_early() calling rcutree_report_cpu_dead() which presumably prevents such a splat from occurring: https://elixir.bootlin.com/linux/v6.8-rc7/source/arch/arm64/kernel/smp.c#L412
> 
> Simply calling rcutree_report_cpu_dead() in arch_cpu_idle_dead() on ARM seems to have no effect though. As my understanding of the CPU hotplugging subsystem on ARM is a bit limited, I would appreciate some help here.

So I think this is down to what check_and_switch_context() is doing.

Tracing through the paths, idle_task_exit() is called from the
arch_cpu_idle_dead() path on both 32-bit ARM and x86. So this is legal
to do (if it wasn't then x86 would have problems.)

idle_task_exit() calls switch_mm(), which is an arch-defined function,
and this calls check_and_switch_context(). Anything which switch_mm()
calls has to be safe to be called from the arch_cpu_idle_dead() path.

We can't get rid of the spinlock in check_and_switch_context() as that
is fundamental to how the ASID handling works - removing it would
cause all sorts of races.

I don't see how we can solve this at the moment, not helped by my
limited RCU knowledge.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel