[PATCH v6 0/3] add pmic pca9451a support

[PATCH v6 0/3] add pmic pca9451a support

[Joy Zou]

The patchset supports pmic pca9451a.
For the details, please check the patch commit log.

---
Changes in v6:
- Change the reg to the second property.

Changes in v5:
- adjust gpio@22 to the front of pmic@25.

Changes in v4:
- modify the comment for uSDHC but not i2c.

Changes in v3:
- modify the dts voltags constraints.
- remove unnecessary changes in driver code.
- modify commit message.
- add tag for dt-bindings.

Changes in v2:
- drop old part support.

Joy Zou (3):
  regulator: dt-bindings: pca9450: add pca9451a support
  regulator: pca9450: add pca9451a support
  arm64: dts: imx93-11x11-evk: add pca9451a support

 .../regulator/nxp,pca9450-regulator.yaml      |   1 +
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 111 ++++++++++
 drivers/regulator/pca9450-regulator.c         | 194 +++++++++++++++++-
 include/linux/regulator/pca9450.h             |   1 +
 4 files changed, 305 insertions(+), 2 deletions(-)

--
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 1/3] regulator: dt-bindings: pca9450: add pca9451a support

[Joy Zou]

Update pca9450 bindings.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
changes in v3:
1. add Acked-by tag.

changes in v2:
1. adjust the subject prefix sequence.
---
 .../devicetree/bindings/regulator/nxp,pca9450-regulator.yaml     | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 3d469b8e9774..849bfa50bdba 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -28,6 +28,7 @@ properties:
       - nxp,pca9450a
       - nxp,pca9450b
       - nxp,pca9450c
+      - nxp,pca9451a
 
   reg:
     maxItems: 1
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 2/3] regulator: pca9450: add pca9451a support

[Joy Zou]

Adding support for new pmic pca9451a.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
---
Changes in v3:
1. remove not related change.
2. delete unnecessary empty line.
3. modify commit message.

Changes in v2:
1. remove the old part support because the old part only is used for sample
and is diffcult to distinguish old and new part. so drop old part.
2. remove the unnecessary marco definition in the file pca9450.h.
---
 drivers/regulator/pca9450-regulator.c | 194 +++++++++++++++++++++++++-
 include/linux/regulator/pca9450.h     |   1 +
 2 files changed, 193 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 2ab365d2749f..242ff25f5b83 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -106,6 +106,14 @@ static const struct linear_range pca9450_dvs_buck_volts[] = {
 	REGULATOR_LINEAR_RANGE(600000,  0x00, 0x7F, 12500),
 };
 
+/*
+ * BUCK1/3
+ * 0.65 to 2.2375V (12.5mV step)
+ */
+static const struct linear_range pca9451a_dvs_buck_volts[] = {
+	REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500),
+};
+
 /*
  * BUCK4/5/6
  * 0.6V to 3.4V (25mV step)
@@ -662,6 +670,178 @@ static const struct pca9450_regulator_desc pca9450bc_regulators[] = {
 	},
 };
 
+static const struct pca9450_regulator_desc pca9451a_regulators[] = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("BUCK1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK1,
+			.ops = &pca9450_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
+			.linear_ranges = pca9451a_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9451a_dvs_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
+			.vsel_mask = BUCK1OUT_DVS0_MASK,
+			.enable_reg = PCA9450_REG_BUCK1CTRL,
+			.enable_mask = BUCK1_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.ramp_mask = BUCK1_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+			.owner = THIS_MODULE,
+			.of_parse_cb = pca9450_set_dvs_levels,
+		},
+		.dvs = {
+			.run_reg = PCA9450_REG_BUCK1OUT_DVS0,
+			.run_mask = BUCK1OUT_DVS0_MASK,
+			.standby_reg = PCA9450_REG_BUCK1OUT_DVS1,
+			.standby_mask = BUCK1OUT_DVS1_MASK,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("BUCK2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK2,
+			.ops = &pca9450_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
+			.linear_ranges = pca9450_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_dvs_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
+			.vsel_mask = BUCK2OUT_DVS0_MASK,
+			.enable_reg = PCA9450_REG_BUCK2CTRL,
+			.enable_mask = BUCK2_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ_STBYREQ,
+			.ramp_mask = BUCK2_RAMP_MASK,
+			.ramp_delay_table = pca9450_dvs_buck_ramp_table,
+			.n_ramp_values = ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
+			.owner = THIS_MODULE,
+			.of_parse_cb = pca9450_set_dvs_levels,
+		},
+		.dvs = {
+			.run_reg = PCA9450_REG_BUCK2OUT_DVS0,
+			.run_mask = BUCK2OUT_DVS0_MASK,
+			.standby_reg = PCA9450_REG_BUCK2OUT_DVS1,
+			.standby_mask = BUCK2OUT_DVS1_MASK,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck4",
+			.of_match = of_match_ptr("BUCK4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK4,
+			.ops = &pca9450_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
+			.linear_ranges = pca9450_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK4OUT,
+			.vsel_mask = BUCK4OUT_MASK,
+			.enable_reg = PCA9450_REG_BUCK4CTRL,
+			.enable_mask = BUCK4_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck5",
+			.of_match = of_match_ptr("BUCK5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK5,
+			.ops = &pca9450_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
+			.linear_ranges = pca9450_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK5OUT,
+			.vsel_mask = BUCK5OUT_MASK,
+			.enable_reg = PCA9450_REG_BUCK5CTRL,
+			.enable_mask = BUCK5_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck6",
+			.of_match = of_match_ptr("BUCK6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_BUCK6,
+			.ops = &pca9450_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
+			.linear_ranges = pca9450_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_buck_volts),
+			.vsel_reg = PCA9450_REG_BUCK6OUT,
+			.vsel_mask = BUCK6OUT_MASK,
+			.enable_reg = PCA9450_REG_BUCK6CTRL,
+			.enable_mask = BUCK6_ENMODE_MASK,
+			.enable_val = BUCK_ENMODE_ONREQ,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo1",
+			.of_match = of_match_ptr("LDO1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_LDO1,
+			.ops = &pca9450_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
+			.linear_ranges = pca9450_ldo1_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo1_volts),
+			.vsel_reg = PCA9450_REG_LDO1CTRL,
+			.vsel_mask = LDO1OUT_MASK,
+			.enable_reg = PCA9450_REG_LDO1CTRL,
+			.enable_mask = LDO1_EN_MASK,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo4",
+			.of_match = of_match_ptr("LDO4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_LDO4,
+			.ops = &pca9450_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
+			.linear_ranges = pca9450_ldo34_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo34_volts),
+			.vsel_reg = PCA9450_REG_LDO4CTRL,
+			.vsel_mask = LDO4OUT_MASK,
+			.enable_reg = PCA9450_REG_LDO4CTRL,
+			.enable_mask = LDO4_EN_MASK,
+			.owner = THIS_MODULE,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo5",
+			.of_match = of_match_ptr("LDO5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = PCA9450_LDO5,
+			.ops = &pca9450_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
+			.linear_ranges = pca9450_ldo5_volts,
+			.n_linear_ranges = ARRAY_SIZE(pca9450_ldo5_volts),
+			.vsel_reg = PCA9450_REG_LDO5CTRL_H,
+			.vsel_mask = LDO5HOUT_MASK,
+			.enable_reg = PCA9450_REG_LDO5CTRL_H,
+			.enable_mask = LDO5H_EN_MASK,
+			.owner = THIS_MODULE,
+		},
+	},
+};
+
 static irqreturn_t pca9450_irq_handler(int irq, void *data)
 {
 	struct pca9450 *pca9450 = data;
@@ -729,6 +909,10 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 		regulator_desc = pca9450bc_regulators;
 		pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators);
 		break;
+	case PCA9450_TYPE_PCA9451A:
+		regulator_desc = pca9451a_regulators;
+		pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators);
+		break;
 	default:
 		dev_err(&i2c->dev, "Unknown device type");
 		return -EINVAL;
@@ -755,7 +939,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 
 	/* Check your board and dts for match the right pmic */
 	if (((device_id >> 4) != 0x1 && type == PCA9450_TYPE_PCA9450A) ||
-	    ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC)) {
+	    ((device_id >> 4) != 0x3 && type == PCA9450_TYPE_PCA9450BC) ||
+	    ((device_id >> 4) != 0x9 && type == PCA9450_TYPE_PCA9451A)) {
 		dev_err(&i2c->dev, "Device id(%x) mismatched\n",
 			device_id >> 4);
 		return -EINVAL;
@@ -846,7 +1031,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
 	}
 
 	dev_info(&i2c->dev, "%s probed.\n",
-		type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc");
+		type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
+		(type == PCA9450_TYPE_PCA9451A ? "pca9451a" : "pca9450bc"));
 
 	return 0;
 }
@@ -864,6 +1050,10 @@ static const struct of_device_id pca9450_of_match[] = {
 		.compatible = "nxp,pca9450c",
 		.data = (void *)PCA9450_TYPE_PCA9450BC,
 	},
+	{
+		.compatible = "nxp,pca9451a",
+		.data = (void *)PCA9450_TYPE_PCA9451A,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pca9450_of_match);
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index 505c908dbb81..243633c8dceb 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -9,6 +9,7 @@
 enum pca9450_chip_type {
 	PCA9450_TYPE_PCA9450A = 0,
 	PCA9450_TYPE_PCA9450BC,
+	PCA9450_TYPE_PCA9451A,
 	PCA9450_TYPE_AMOUNT,
 };
 
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 3/3] arm64: dts: imx93-11x11-evk: add pca9451a support

[Joy Zou]

Support pca9451a on imx93-11x11-evk.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
Changes in v6:
1.Change the reg to the second property.

Changes in v5:
1.adjust gpio@22 to the front of pmic@25.

Changes in v4:
1. modify the comment for uSDHC but not i2c.

Changes in v3:
1. modify the voltages constraints according to the imx93 datasheet.
---
 .../boot/dts/freescale/imx93-11x11-evk.dts    | 111 ++++++++++++++++++
 1 file changed, 111 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 9921ea13ab48..07e85a30a25f 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -183,6 +183,104 @@ &wdog3 {
 	status = "okay";
 };
 
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&pcal6524>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <610000>;
+				regulator-max-microvolt = <950000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <670000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1060000>;
+				regulator-max-microvolt = <1140000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1620000>;
+				regulator-max-microvolt = <1980000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <840000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
@@ -238,6 +336,19 @@ MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B		0x31e
 		>;
 	};
 
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL			0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA			0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX93_PAD_CCM_CLKO2__GPIO3_IO27			0x31e
+		>;
+	};
+
 	/* need to config the SION for data and cmd pad, refer to ERR052021 */
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
-- 
2.37.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 3/3] arm64: dts: imx93-11x11-evk: add pca9451a support

[Shawn Guo]

On Wed, Mar 20, 2024 at 02:28:49PM +0800, Joy Zou wrote:
> Support pca9451a on imx93-11x11-evk.
> 
> Signed-off-by: Joy Zou <joy.zou@nxp.com>
> Reviewed-by: Frank Li <Frank.Li@nxp.com>

Applied, thanks!


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel