* [PATCH] arm64: dts: imx8mp-msc-sm2s: Add HDMI output
@ 2024-06-12 10:17 Luca Ceresoli
2024-06-17 2:28 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Luca Ceresoli @ 2024-06-12 10:17 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam
Cc: Lucas Stach, Adam Ford, Thomas Petazzoni, devicetree, imx,
linux-arm-kernel, linux-kernel, Luca Ceresoli
Enable the HDMI output of the MSC SM2-MB-EP1 carrier board based the
SM2S-IMX8PLUS SMARC module.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
.../boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
index da4b1807c275..83194ea7cb81 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
@@ -46,6 +46,24 @@ codec_dai: simple-audio-card,codec {
};
};
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
&i2c1 {
sgtl5000: audio-codec@a {
compatible = "fsl,sgtl5000";
@@ -92,6 +110,15 @@ &iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_smarc_gpio>;
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c2
+ MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c2
+ MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x10
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x10
+ >;
+ };
+
pinctrl_sai2: sai2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
---
base-commit: 2ef5971ff345d3c000873725db555085e0131961
change-id: 20240612-imx8mp-msc-sm2s-hdmi-4df0b8b5b32c
Best regards,
--
Luca Ceresoli <luca.ceresoli@bootlin.com>
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: imx8mp-msc-sm2s: Add HDMI output
2024-06-12 10:17 [PATCH] arm64: dts: imx8mp-msc-sm2s: Add HDMI output Luca Ceresoli
@ 2024-06-17 2:28 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2024-06-17 2:28 UTC (permalink / raw)
To: Luca Ceresoli
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam, Lucas Stach,
Adam Ford, Thomas Petazzoni, devicetree, imx, linux-arm-kernel,
linux-kernel
On Wed, Jun 12, 2024 at 12:17:27PM +0200, Luca Ceresoli wrote:
> Enable the HDMI output of the MSC SM2-MB-EP1 carrier board based the
> SM2S-IMX8PLUS SMARC module.
>
> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Applied, thanks!
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-06-17 2:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-06-12 10:17 [PATCH] arm64: dts: imx8mp-msc-sm2s: Add HDMI output Luca Ceresoli
2024-06-17 2:28 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).