linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Cristian Marussi <cristian.marussi@arm.com>
To: Luke Parkin <luke.parkin@arm.com>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, arm-scmi@vger.kernel.org,
	sudeep.holla@arm.com, cristian.marussi@arm.com
Subject: Re: [PATCH v3 4/5] firmware: arm_scmi: Create debugfs files for statistics
Date: Wed, 24 Jul 2024 15:26:21 +0100	[thread overview]
Message-ID: <ZqEPDY45bPuQK95W@pluto> (raw)
In-Reply-To: <20240715133751.2877197-5-luke.parkin@arm.com>

On Mon, Jul 15, 2024 at 02:37:50PM +0100, Luke Parkin wrote:
> Create debugfs files for the statistics in the scmi_debug_stats struct
> 
> Signed-off-by: Luke Parkin <luke.parkin@arm.com>

Here you missed the seprator

---

before the changelog...so this will go into the final commit.

Thanks,
Cristian

> v2->v3
> Add extra statistics also added in v3
> v1->v2
> Only create stats pointer if stats are enabled
> Move stats debugfs creation into a seperate helper function
> ---
>  drivers/firmware/arm_scmi/driver.c | 38 ++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
> index b22f104cda36..9378e2d8af4f 100644
> --- a/drivers/firmware/arm_scmi/driver.c
> +++ b/drivers/firmware/arm_scmi/driver.c
> @@ -2865,6 +2865,41 @@ static int scmi_device_request_notifier(struct notifier_block *nb,
>  	return NOTIFY_OK;
>  }
>  
> +static void scmi_debugfs_stats_setup(struct scmi_info *info,
> +				     struct dentry *trans)
> +{
> +	struct dentry *stats;
> +
> +	stats = debugfs_create_dir("stats", trans);
> +
> +	debugfs_create_atomic_t("sent_ok", 0400, stats,
> +				&info->dbg_stats[SENT_OK]);
> +	debugfs_create_atomic_t("sent_fail", 0400, stats,
> +				&info->dbg_stats[SENT_FAIL]);
> +	debugfs_create_atomic_t("sent_fail_polling_unsupported", 0400, stats,
> +				&info->dbg_stats[SENT_FAIL_POLLING_UNSUPPORTED]);
> +	debugfs_create_atomic_t("sent_fail_channel_not_found", 0400, stats,
> +				&info->dbg_stats[SENT_FAIL_CHANNEL_NOT_FOUND]);
> +	debugfs_create_atomic_t("response_ok", 0400, stats,
> +				&info->dbg_stats[RESPONSE_OK]);
> +	debugfs_create_atomic_t("notif_ok", 0400, stats,
> +				&info->dbg_stats[NOTIF_OK]);
> +	debugfs_create_atomic_t("dlyd_resp_ok", 0400, stats,
> +				&info->dbg_stats[DLYD_RESPONSE_OK]);
> +	debugfs_create_atomic_t("xfers_resp_timeout", 0400, stats,
> +				&info->dbg_stats[XFERS_RESPONSE_TIMEOUT]);
> +	debugfs_create_atomic_t("response_polled_ok", 0400, stats,
> +				&info->dbg_stats[RESPONSE_POLLED_OK]);
> +	debugfs_create_atomic_t("err_msg_unexpected", 0400, stats,
> +				&info->dbg_stats[ERR_MSG_UNEXPECTED]);
> +	debugfs_create_atomic_t("err_msg_invalid", 0400, stats,
> +				&info->dbg_stats[ERR_MSG_INVALID]);
> +	debugfs_create_atomic_t("err_msg_nomem", 0400, stats,
> +				&info->dbg_stats[ERR_MSG_NOMEM]);
> +	debugfs_create_atomic_t("err_protocol", 0400, stats,
> +				&info->dbg_stats[ERR_PROTOCOL]);
> +}
> +
>  static void scmi_debugfs_common_cleanup(void *d)
>  {
>  	struct scmi_debug_info *dbg = d;
> @@ -2931,6 +2966,9 @@ static struct scmi_debug_info *scmi_debugfs_common_setup(struct scmi_info *info)
>  	debugfs_create_u32("rx_max_msg", 0400, trans,
>  			   (u32 *)&info->rx_minfo.max_msg);
>  
> +	if (IS_ENABLED(CONFIG_ARM_SCMI_DEBUG_STATISTICS))
> +		scmi_debugfs_stats_setup(info, trans);
> +
>  	dbg->top_dentry = top_dentry;
>  
>  	if (devm_add_action_or_reset(info->dev,
> -- 
> 2.34.1
> 
> 


  reply	other threads:[~2024-07-24 14:27 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-15 13:37 [PATCH v3 0/5] Add Per-transport SCMI debug statistics Luke Parkin
2024-07-15 13:37 ` [PATCH v3 1/5] firmware: arm_scmi: Remove superfluous handle_to_scmi_info Luke Parkin
2024-07-24 13:07   ` Cristian Marussi
2024-07-15 13:37 ` [PATCH v3 2/5] firmware: arm_scmi: Add support for tracking statistics Luke Parkin
2024-07-24 13:40   ` Cristian Marussi
2024-07-15 13:37 ` [PATCH v3 3/5] firmware: arm_scmi: Track basic SCMI statistics Luke Parkin
2024-07-16 12:29   ` Peng Fan
2024-07-22 12:21     ` Luke Parkin
2024-07-24 14:24       ` Cristian Marussi
2024-07-24 14:21   ` Cristian Marussi
2024-07-24 14:39     ` Luke Parkin
2024-07-15 13:37 ` [PATCH v3 4/5] firmware: arm_scmi: Create debugfs files for statistics Luke Parkin
2024-07-24 14:26   ` Cristian Marussi [this message]
2024-07-15 13:37 ` [PATCH v3 5/5] firmware: arm_scmi: Reset statistics Luke Parkin
2024-07-24 14:41   ` Cristian Marussi
2024-07-24 14:46 ` [PATCH v3 0/5] Add Per-transport SCMI debug statistics Cristian Marussi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZqEPDY45bPuQK95W@pluto \
    --to=cristian.marussi@arm.com \
    --cc=arm-scmi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luke.parkin@arm.com \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).