From: Mostafa Saleh <smostafa@google.com>
To: Robin Murphy <robin.murphy@arm.com>
Cc: linux-kernel@vger.kernel.org, iommu@lists.linux.dev,
linux-arm-kernel@lists.infradead.org, will@kernel.org,
joro@8bytes.org, jgg@ziepe.ca, nicolinc@nvidia.com,
mshavit@google.com
Subject: Re: [PATCH 1/2] iommu/arm-smmu-v3: Match Stall behaviour for S2
Date: Tue, 13 Aug 2024 13:40:03 +0000 [thread overview]
Message-ID: <ZrtiM3J4jEFOZ1y5@google.com> (raw)
In-Reply-To: <fc80ffde-2d19-4bd6-9590-a80049302ad7@arm.com>
Hi Robin,
On Tue, Aug 13, 2024 at 12:46:26PM +0100, Robin Murphy wrote:
> On 12/08/2024 9:52 pm, Mostafa Saleh wrote:
> > S2S must be set when stall model is forced "ARM_SMMU_FEAT_STALL_FORCE".
> > But at the moment the driver ignores that, instead of doing the minimum
> > and only set S2S for “ARM_SMMU_FEAT_STALL_FORCE” we can just match what
>
> This was highly confusing, until the 3rd reading when I realised that maybe
> "instead of..." does not in fact belong to the description of the current
> behaviour, and it does start making sense if you swap the previous comma and
> full stop with each other.
Will do, I will also reword it to make it more clear.
>
> > S1 does which also set it for “ARM_SMMU_FEAT_STALL” and the master
> > has requested stalls.
> > This makes the driver more consistent when running on different SMMU
> > instances with different supported stages.
> >
> > Signed-off-by: Mostafa Saleh <smostafa@google.com>
> > ---
> > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 5 +++++
> > drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 1 +
> > 2 files changed, 6 insertions(+)
> >
> > diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> > index a31460f9f3d4..8d573d9ca93c 100644
> > --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> > +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c
> > @@ -1562,6 +1562,11 @@ void arm_smmu_make_cdtable_ste(struct arm_smmu_ste *target,
> > (cd_table->cdtab_dma & STRTAB_STE_0_S1CTXPTR_MASK) |
> > FIELD_PREP(STRTAB_STE_0_S1CDMAX, cd_table->s1cdmax));
> > + /* S2S is ignored if stage-2 exists but not enabled. */
> > + if (master->stall_enabled &&
> > + smmu->features & ARM_SMMU_FEAT_TRANS_S2)
> > + target->data[0] |= FIELD_PREP(STRTAB_STE_2_S2S, 1);
>
> In the middle of the ASID?
Agh, of course it should be [2], sorry about that; it was late when I
wrote the patch :)
I will send a v2 with the fix.
Thanks,
Mostafa
>
> Thanks,
> Robin.
>
> > +
> > target->data[1] = cpu_to_le64(
> > FIELD_PREP(STRTAB_STE_1_S1DSS, s1dss) |
> > FIELD_PREP(STRTAB_STE_1_S1CIR, STRTAB_STE_1_S1C_CACHE_WBRA) |
> > diff --git a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
> > index 14bca41a981b..0dc7ad43c64c 100644
> > --- a/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
> > +++ b/drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h
> > @@ -267,6 +267,7 @@ struct arm_smmu_ste {
> > #define STRTAB_STE_2_S2AA64 (1UL << 51)
> > #define STRTAB_STE_2_S2ENDI (1UL << 52)
> > #define STRTAB_STE_2_S2PTW (1UL << 54)
> > +#define STRTAB_STE_2_S2S (1UL << 57)
> > #define STRTAB_STE_2_S2R (1UL << 58)
> > #define STRTAB_STE_3_S2TTB_MASK GENMASK_ULL(51, 4)
next prev parent reply other threads:[~2024-08-13 13:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-12 20:52 [PATCH 0/2] Fix handling of S2 stalls Mostafa Saleh
2024-08-12 20:52 ` [PATCH 1/2] iommu/arm-smmu-v3: Match Stall behaviour for S2 Mostafa Saleh
2024-08-13 11:46 ` Robin Murphy
2024-08-13 13:40 ` Mostafa Saleh [this message]
2024-08-13 17:01 ` Jason Gunthorpe
2024-08-12 20:52 ` [PATCH 2/2] iommu/arm-smmu-v3: Report stalled S2 events Mostafa Saleh
2024-08-13 11:57 ` Robin Murphy
2024-08-13 13:43 ` Mostafa Saleh
2024-08-13 17:51 ` Jason Gunthorpe
2024-08-14 9:58 ` Mostafa Saleh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZrtiM3J4jEFOZ1y5@google.com \
--to=smostafa@google.com \
--cc=iommu@lists.linux.dev \
--cc=jgg@ziepe.ca \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mshavit@google.com \
--cc=nicolinc@nvidia.com \
--cc=robin.murphy@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).