[PATCH v3 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"

[PATCH v3 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"

[Xu Yang]

The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
block. Since i.MX95 usb phy is able to switch SS lanes, this will also
add orientation-switch and port property to the file.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - replace minItems with description in reg property
 - remove orientation-switch and port
 - refer to usb-switch.yaml
 - use unevaluatedProperties
Changes in v3:
 - add Rb tag
---
 .../bindings/phy/fsl,imx8mq-usb-phy.yaml      | 42 ++++++++++++++++---
 1 file changed, 37 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709fea..6d6d211883ae 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -11,12 +11,17 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx8mq-usb-phy
-      - fsl,imx8mp-usb-phy
+    oneOf:
+      - enum:
+          - fsl,imx8mq-usb-phy
+          - fsl,imx8mp-usb-phy
+      - items:
+          - const: fsl,imx95-usb-phy
+          - const: fsl,imx8mp-usb-phy
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   "#phy-cells":
     const: 0
@@ -89,7 +94,34 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usb-phy
+    then:
+      properties:
+        reg:
+          items:
+            - description: USB PHY Control range
+            - description: USB PHY TCA Block range
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx95-usb-phy
+    then:
+      $ref: /schemas/usb/usb-switch.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |
-- 
2.34.1

[PATCH v3 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95

[Xu Yang]

The i.MX95 is compatible with i.MX8MP's usb controller. This will add a
compatible string "fsl,imx95-dwc3" for i.MX95.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - add Ack-by tag
Changes in v3:
 - no changes
---
 Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index 9ea1e4cd0709..baf130669c38 100644
--- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -12,7 +12,11 @@ maintainers:
 
 properties:
   compatible:
-    const: fsl,imx8mp-dwc3
+    oneOf:
+      - items:
+          - const: fsl,imx95-dwc3
+          - const: fsl,imx8mp-dwc3
+      - const: fsl,imx8mp-dwc3
 
   reg:
     items:
-- 
2.34.1

[PATCH v3 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95

[Xu Yang]

The i.MX95 USB3 phy has a Type-C Assist block (TCA). This block consists
two functional blocks (XBar assist and VBus assist) and one system
access interface using APB.

The primary functionality of XBar assist is:
 - switching lane for flip
 - moving unused lanes into lower power states.

This info can be get from:
i.MX95 RM Chapter 163.3.8 Type-C assist (TCA) block.

This will add support for TCA block to achieve lane switching and tca
lower power functionality.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Jun Li <jun.li@nxp.com>

---
Changes in v2:
 - return the value of imx95_usb_phy_get_tca()
Changes in v3:
 - no changes
---
 drivers/phy/freescale/Kconfig              |   1 +
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 240 +++++++++++++++++++++
 2 files changed, 241 insertions(+)

diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index dcd9acff6d01..81f53564ee15 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -5,6 +5,7 @@ if (ARCH_MXC && ARM64) || COMPILE_TEST
 config PHY_FSL_IMX8MQ_USB
 	tristate "Freescale i.MX8M USB3 PHY"
 	depends on OF && HAS_IOMEM
+	depends on TYPEC || TYPEC=n
 	select GENERIC_PHY
 	default ARCH_MXC && ARM64
 
diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
index adc6394626ce..8bd6d91951a2 100644
--- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
+++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
@@ -10,6 +10,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
+#include <linux/usb/typec_mux.h>
 
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
@@ -50,11 +51,66 @@
 
 #define PHY_TUNE_DEFAULT		0xffffffff
 
+#define TCA_CLK_RST			0x00
+#define TCA_CLK_RST_SW			BIT(9)
+#define TCA_CLK_RST_REF_CLK_EN		BIT(1)
+#define TCA_CLK_RST_SUSPEND_CLK_EN	BIT(0)
+
+#define TCA_INTR_EN			0x04
+#define TCA_INTR_STS			0x08
+
+#define TCA_GCFG			0x10
+#define TCA_GCFG_ROLE_HSTDEV		BIT(4)
+#define TCA_GCFG_OP_MODE		GENMASK(1, 0)
+#define TCA_GCFG_OP_MODE_SYSMODE	0
+#define TCA_GCFG_OP_MODE_SYNCMODE	1
+
+#define TCA_TCPC			0x14
+#define TCA_TCPC_VALID			BIT(4)
+#define TCA_TCPC_LOW_POWER_EN		BIT(3)
+#define TCA_TCPC_ORIENTATION_NORMAL	BIT(2)
+#define TCA_TCPC_MUX_CONTRL		GENMASK(1, 0)
+#define TCA_TCPC_MUX_CONTRL_NO_CONN	0
+#define TCA_TCPC_MUX_CONTRL_USB_CONN	1
+
+#define TCA_SYSMODE_CFG			0x18
+#define TCA_SYSMODE_TCPC_DISABLE	BIT(3)
+#define TCA_SYSMODE_TCPC_FLIP		BIT(2)
+
+#define TCA_CTRLSYNCMODE_CFG0		0x20
+#define TCA_CTRLSYNCMODE_CFG1           0x20
+
+#define TCA_PSTATE			0x30
+#define TCA_PSTATE_CM_STS		BIT(4)
+#define TCA_PSTATE_TX_STS		BIT(3)
+#define TCA_PSTATE_RX_PLL_STS		BIT(2)
+#define TCA_PSTATE_PIPE0_POWER_DOWN	GENMASK(1, 0)
+
+#define TCA_GEN_STATUS			0x34
+#define TCA_GEN_DEV_POR			BIT(12)
+#define TCA_GEN_REF_CLK_SEL		BIT(8)
+#define TCA_GEN_TYPEC_FLIP_INVERT	BIT(4)
+#define TCA_GEN_PHY_TYPEC_DISABLE	BIT(3)
+#define TCA_GEN_PHY_TYPEC_FLIP		BIT(2)
+
+#define TCA_VBUS_CTRL			0x40
+#define TCA_VBUS_STATUS			0x44
+
+#define TCA_INFO			0xFC
+
+struct tca_blk {
+	struct typec_switch_dev *sw;
+	void __iomem *base;
+	struct mutex mutex;
+	enum typec_orientation orientation;
+};
+
 struct imx8mq_usb_phy {
 	struct phy *phy;
 	struct clk *clk;
 	void __iomem *base;
 	struct regulator *vbus;
+	struct tca_blk *tca;
 	u32 pcs_tx_swing_full;
 	u32 pcs_tx_deemph_3p5db;
 	u32 tx_vref_tune;
@@ -64,6 +120,170 @@ struct imx8mq_usb_phy {
 	u32 comp_dis_tune;
 };
 
+
+static void tca_blk_orientation_set(struct tca_blk *tca,
+				enum typec_orientation orientation);
+
+#ifdef CONFIG_TYPEC
+
+static int tca_blk_typec_switch_set(struct typec_switch_dev *sw,
+				enum typec_orientation orientation)
+{
+	struct imx8mq_usb_phy *imx_phy = typec_switch_get_drvdata(sw);
+	struct tca_blk *tca = imx_phy->tca;
+	int ret;
+
+	if (tca->orientation == orientation)
+		return 0;
+
+	ret = clk_prepare_enable(imx_phy->clk);
+	if (ret)
+		return ret;
+
+	tca_blk_orientation_set(tca, orientation);
+	clk_disable_unprepare(imx_phy->clk);
+
+	return 0;
+}
+
+static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev,
+					struct imx8mq_usb_phy *imx_phy)
+{
+	struct device *dev = &pdev->dev;
+	struct typec_switch_dev *sw;
+	struct typec_switch_desc sw_desc = { };
+
+	sw_desc.drvdata = imx_phy;
+	sw_desc.fwnode = dev->fwnode;
+	sw_desc.set = tca_blk_typec_switch_set;
+	sw_desc.name = NULL;
+
+	sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(sw)) {
+		dev_err(dev, "Error register tca orientation switch: %ld",
+				PTR_ERR(sw));
+		return NULL;
+	}
+
+	return sw;
+}
+
+static void tca_blk_put_typec_switch(struct typec_switch_dev *sw)
+{
+	typec_switch_unregister(sw);
+}
+
+#else
+
+static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev,
+			struct imx8mq_usb_phy *imx_phy)
+{
+	return NULL;
+}
+
+static void tca_blk_put_typec_switch(struct typec_switch_dev *sw) {}
+
+#endif /* CONFIG_TYPEC */
+
+static void tca_blk_orientation_set(struct tca_blk *tca,
+				enum typec_orientation orientation)
+{
+	u32 val;
+
+	mutex_lock(&tca->mutex);
+
+	if (orientation == TYPEC_ORIENTATION_NONE) {
+		/*
+		 * use Controller Synced Mode for TCA low power enable and
+		 * put PHY to USB safe state.
+		 */
+		val = readl(tca->base + TCA_GCFG);
+		val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYNCMODE);
+		writel(val, tca->base + TCA_GCFG);
+
+		val = readl(tca->base + TCA_TCPC);
+		val = TCA_TCPC_VALID | TCA_TCPC_LOW_POWER_EN;
+		writel(val, tca->base + TCA_TCPC);
+
+		goto out;
+	}
+
+	/* use System Configuration Mode for TCA mux control. */
+	val = readl(tca->base + TCA_GCFG);
+	val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYSMODE);
+	writel(val, tca->base + TCA_GCFG);
+
+	/* Disable TCA module */
+	val = readl(tca->base + TCA_SYSMODE_CFG);
+	val |= TCA_SYSMODE_TCPC_DISABLE;
+	writel(val, tca->base + TCA_SYSMODE_CFG);
+
+	if (orientation == TYPEC_ORIENTATION_REVERSE)
+		val |= TCA_SYSMODE_TCPC_FLIP;
+	else if (orientation == TYPEC_ORIENTATION_NORMAL)
+		val &= ~TCA_SYSMODE_TCPC_FLIP;
+
+	writel(val, tca->base + TCA_SYSMODE_CFG);
+
+	/* Enable TCA module */
+	val &= ~TCA_SYSMODE_TCPC_DISABLE;
+	writel(val, tca->base + TCA_SYSMODE_CFG);
+
+out:
+	tca->orientation = orientation;
+	mutex_unlock(&tca->mutex);
+}
+
+static void tca_blk_init(struct tca_blk *tca)
+{
+	u32 val;
+
+	/* reset XBar block */
+	val = readl(tca->base + TCA_CLK_RST);
+	val &= ~TCA_CLK_RST_SW;
+	writel(val, tca->base + TCA_CLK_RST);
+
+	udelay(100);
+
+	/* clear reset */
+	val |= TCA_CLK_RST_SW;
+	writel(val, tca->base + TCA_CLK_RST);
+
+	tca_blk_orientation_set(tca, tca->orientation);
+}
+
+static struct tca_blk *imx95_usb_phy_get_tca(struct platform_device *pdev,
+				struct imx8mq_usb_phy *imx_phy)
+{
+	struct device *dev = &pdev->dev;
+	struct tca_blk *tca;
+
+	tca = devm_kzalloc(dev, sizeof(*tca), GFP_KERNEL);
+	if (!tca)
+		return ERR_PTR(-ENOMEM);
+
+	tca->base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(tca->base))
+		return tca->base;
+
+	mutex_init(&tca->mutex);
+
+	tca->orientation = TYPEC_ORIENTATION_NORMAL;
+	tca->sw = tca_blk_get_typec_switch(pdev, imx_phy);
+
+	return tca;
+}
+
+static void imx95_usb_phy_put_tca(struct imx8mq_usb_phy *imx_phy)
+{
+	struct tca_blk *tca = imx_phy->tca;
+
+	if (!tca)
+		return;
+
+	tca_blk_put_typec_switch(tca->sw);
+}
+
 static u32 phy_tx_vref_tune_from_property(u32 percent)
 {
 	percent = clamp(percent, 94U, 124U);
@@ -315,6 +535,9 @@ static int imx8mp_usb_phy_init(struct phy *phy)
 
 	imx8m_phy_tune(imx_phy);
 
+	if (imx_phy->tca)
+		tca_blk_init(imx_phy->tca);
+
 	return 0;
 }
 
@@ -359,6 +582,8 @@ static const struct of_device_id imx8mq_usb_phy_of_match[] = {
 	 .data = &imx8mq_usb_phy_ops,},
 	{.compatible = "fsl,imx8mp-usb-phy",
 	 .data = &imx8mp_usb_phy_ops,},
+	{.compatible = "fsl,imx95-usb-phy",
+	 .data = &imx8mp_usb_phy_ops,},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
@@ -398,6 +623,13 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 
 	phy_set_drvdata(imx_phy->phy, imx_phy);
 
+	if (device_is_compatible(dev, "fsl,imx95-usb-phy")) {
+		imx_phy->tca = imx95_usb_phy_get_tca(pdev, imx_phy);
+		if (IS_ERR(imx_phy->tca))
+			return dev_err_probe(dev, PTR_ERR(imx_phy->tca),
+						"failed to get tca\n");
+	}
+
 	imx8m_get_phy_tuning_data(imx_phy);
 
 	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
@@ -405,8 +637,16 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
+static void imx8mq_usb_phy_remove(struct platform_device *pdev)
+{
+	struct imx8mq_usb_phy *imx_phy = platform_get_drvdata(pdev);
+
+	imx95_usb_phy_put_tca(imx_phy);
+}
+
 static struct platform_driver imx8mq_usb_phy_driver = {
 	.probe	= imx8mq_usb_phy_probe,
+	.remove = imx8mq_usb_phy_remove,
 	.driver = {
 		.name	= "imx8mq-usb-phy",
 		.of_match_table	= imx8mq_usb_phy_of_match,
-- 
2.34.1

Re: [PATCH v3 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95

[Vinod Koul]

On 26-08-24, 15:08, Xu Yang wrote:
> The i.MX95 USB3 phy has a Type-C Assist block (TCA). This block consists
> two functional blocks (XBar assist and VBus assist) and one system
> access interface using APB.
> 
> The primary functionality of XBar assist is:
>  - switching lane for flip
>  - moving unused lanes into lower power states.
> 
> This info can be get from:
> i.MX95 RM Chapter 163.3.8 Type-C assist (TCA) block.
> 
> This will add support for TCA block to achieve lane switching and tca
> lower power functionality.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> Reviewed-by: Jun Li <jun.li@nxp.com>
> 
> ---
> Changes in v2:
>  - return the value of imx95_usb_phy_get_tca()
> Changes in v3:
>  - no changes
> ---
>  drivers/phy/freescale/Kconfig              |   1 +
>  drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 240 +++++++++++++++++++++
>  2 files changed, 241 insertions(+)
> 
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index dcd9acff6d01..81f53564ee15 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -5,6 +5,7 @@ if (ARCH_MXC && ARM64) || COMPILE_TEST
>  config PHY_FSL_IMX8MQ_USB
>  	tristate "Freescale i.MX8M USB3 PHY"
>  	depends on OF && HAS_IOMEM
> +	depends on TYPEC || TYPEC=n
>  	select GENERIC_PHY
>  	default ARCH_MXC && ARM64
>  
> diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> index adc6394626ce..8bd6d91951a2 100644
> --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> @@ -10,6 +10,7 @@
>  #include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/usb/typec_mux.h>
>  
>  #define PHY_CTRL0			0x0
>  #define PHY_CTRL0_REF_SSP_EN		BIT(2)
> @@ -50,11 +51,66 @@
>  
>  #define PHY_TUNE_DEFAULT		0xffffffff
>  
> +#define TCA_CLK_RST			0x00
> +#define TCA_CLK_RST_SW			BIT(9)
> +#define TCA_CLK_RST_REF_CLK_EN		BIT(1)
> +#define TCA_CLK_RST_SUSPEND_CLK_EN	BIT(0)
> +
> +#define TCA_INTR_EN			0x04
> +#define TCA_INTR_STS			0x08
> +
> +#define TCA_GCFG			0x10
> +#define TCA_GCFG_ROLE_HSTDEV		BIT(4)
> +#define TCA_GCFG_OP_MODE		GENMASK(1, 0)
> +#define TCA_GCFG_OP_MODE_SYSMODE	0
> +#define TCA_GCFG_OP_MODE_SYNCMODE	1
> +
> +#define TCA_TCPC			0x14
> +#define TCA_TCPC_VALID			BIT(4)
> +#define TCA_TCPC_LOW_POWER_EN		BIT(3)
> +#define TCA_TCPC_ORIENTATION_NORMAL	BIT(2)
> +#define TCA_TCPC_MUX_CONTRL		GENMASK(1, 0)
> +#define TCA_TCPC_MUX_CONTRL_NO_CONN	0
> +#define TCA_TCPC_MUX_CONTRL_USB_CONN	1
> +
> +#define TCA_SYSMODE_CFG			0x18
> +#define TCA_SYSMODE_TCPC_DISABLE	BIT(3)
> +#define TCA_SYSMODE_TCPC_FLIP		BIT(2)
> +
> +#define TCA_CTRLSYNCMODE_CFG0		0x20
> +#define TCA_CTRLSYNCMODE_CFG1           0x20
> +
> +#define TCA_PSTATE			0x30
> +#define TCA_PSTATE_CM_STS		BIT(4)
> +#define TCA_PSTATE_TX_STS		BIT(3)
> +#define TCA_PSTATE_RX_PLL_STS		BIT(2)
> +#define TCA_PSTATE_PIPE0_POWER_DOWN	GENMASK(1, 0)
> +
> +#define TCA_GEN_STATUS			0x34
> +#define TCA_GEN_DEV_POR			BIT(12)
> +#define TCA_GEN_REF_CLK_SEL		BIT(8)
> +#define TCA_GEN_TYPEC_FLIP_INVERT	BIT(4)
> +#define TCA_GEN_PHY_TYPEC_DISABLE	BIT(3)
> +#define TCA_GEN_PHY_TYPEC_FLIP		BIT(2)
> +
> +#define TCA_VBUS_CTRL			0x40
> +#define TCA_VBUS_STATUS			0x44
> +
> +#define TCA_INFO			0xFC
> +
> +struct tca_blk {
> +	struct typec_switch_dev *sw;
> +	void __iomem *base;
> +	struct mutex mutex;
> +	enum typec_orientation orientation;
> +};
> +
>  struct imx8mq_usb_phy {
>  	struct phy *phy;
>  	struct clk *clk;
>  	void __iomem *base;
>  	struct regulator *vbus;
> +	struct tca_blk *tca;
>  	u32 pcs_tx_swing_full;
>  	u32 pcs_tx_deemph_3p5db;
>  	u32 tx_vref_tune;
> @@ -64,6 +120,170 @@ struct imx8mq_usb_phy {
>  	u32 comp_dis_tune;
>  };
>  
> +
> +static void tca_blk_orientation_set(struct tca_blk *tca,
> +				enum typec_orientation orientation);
> +
> +#ifdef CONFIG_TYPEC
> +
> +static int tca_blk_typec_switch_set(struct typec_switch_dev *sw,
> +				enum typec_orientation orientation)
> +{
> +	struct imx8mq_usb_phy *imx_phy = typec_switch_get_drvdata(sw);
> +	struct tca_blk *tca = imx_phy->tca;
> +	int ret;
> +
> +	if (tca->orientation == orientation)
> +		return 0;
> +
> +	ret = clk_prepare_enable(imx_phy->clk);
> +	if (ret)
> +		return ret;
> +
> +	tca_blk_orientation_set(tca, orientation);
> +	clk_disable_unprepare(imx_phy->clk);
> +
> +	return 0;
> +}
> +
> +static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev,
> +					struct imx8mq_usb_phy *imx_phy)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct typec_switch_dev *sw;
> +	struct typec_switch_desc sw_desc = { };
> +
> +	sw_desc.drvdata = imx_phy;
> +	sw_desc.fwnode = dev->fwnode;
> +	sw_desc.set = tca_blk_typec_switch_set;
> +	sw_desc.name = NULL;
> +
> +	sw = typec_switch_register(dev, &sw_desc);
> +	if (IS_ERR(sw)) {
> +		dev_err(dev, "Error register tca orientation switch: %ld",
> +				PTR_ERR(sw));
> +		return NULL;
> +	}
> +
> +	return sw;
> +}
> +
> +static void tca_blk_put_typec_switch(struct typec_switch_dev *sw)
> +{
> +	typec_switch_unregister(sw);
> +}
> +
> +#else
> +
> +static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev,
> +			struct imx8mq_usb_phy *imx_phy)
> +{
> +	return NULL;
> +}
> +
> +static void tca_blk_put_typec_switch(struct typec_switch_dev *sw) {}
> +
> +#endif /* CONFIG_TYPEC */
> +
> +static void tca_blk_orientation_set(struct tca_blk *tca,
> +				enum typec_orientation orientation)
> +{
> +	u32 val;
> +
> +	mutex_lock(&tca->mutex);
> +
> +	if (orientation == TYPEC_ORIENTATION_NONE) {
> +		/*
> +		 * use Controller Synced Mode for TCA low power enable and
> +		 * put PHY to USB safe state.
> +		 */
> +		val = readl(tca->base + TCA_GCFG);
> +		val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYNCMODE);
> +		writel(val, tca->base + TCA_GCFG);
> +
> +		val = readl(tca->base + TCA_TCPC);
> +		val = TCA_TCPC_VALID | TCA_TCPC_LOW_POWER_EN;
> +		writel(val, tca->base + TCA_TCPC);
> +
> +		goto out;
> +	}
> +
> +	/* use System Configuration Mode for TCA mux control. */
> +	val = readl(tca->base + TCA_GCFG);
> +	val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYSMODE);
> +	writel(val, tca->base + TCA_GCFG);
> +
> +	/* Disable TCA module */
> +	val = readl(tca->base + TCA_SYSMODE_CFG);
> +	val |= TCA_SYSMODE_TCPC_DISABLE;
> +	writel(val, tca->base + TCA_SYSMODE_CFG);
> +
> +	if (orientation == TYPEC_ORIENTATION_REVERSE)
> +		val |= TCA_SYSMODE_TCPC_FLIP;
> +	else if (orientation == TYPEC_ORIENTATION_NORMAL)
> +		val &= ~TCA_SYSMODE_TCPC_FLIP;
> +
> +	writel(val, tca->base + TCA_SYSMODE_CFG);
> +
> +	/* Enable TCA module */
> +	val &= ~TCA_SYSMODE_TCPC_DISABLE;
> +	writel(val, tca->base + TCA_SYSMODE_CFG);
> +
> +out:
> +	tca->orientation = orientation;
> +	mutex_unlock(&tca->mutex);
> +}
> +
> +static void tca_blk_init(struct tca_blk *tca)
> +{
> +	u32 val;
> +
> +	/* reset XBar block */
> +	val = readl(tca->base + TCA_CLK_RST);
> +	val &= ~TCA_CLK_RST_SW;
> +	writel(val, tca->base + TCA_CLK_RST);
> +
> +	udelay(100);
> +
> +	/* clear reset */
> +	val |= TCA_CLK_RST_SW;
> +	writel(val, tca->base + TCA_CLK_RST);
> +
> +	tca_blk_orientation_set(tca, tca->orientation);
> +}
> +
> +static struct tca_blk *imx95_usb_phy_get_tca(struct platform_device *pdev,
> +				struct imx8mq_usb_phy *imx_phy)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct tca_blk *tca;
> +
> +	tca = devm_kzalloc(dev, sizeof(*tca), GFP_KERNEL);
> +	if (!tca)
> +		return ERR_PTR(-ENOMEM);
> +
> +	tca->base = devm_platform_ioremap_resource(pdev, 1);
> +	if (IS_ERR(tca->base))
> +		return tca->base;
> +
> +	mutex_init(&tca->mutex);
> +
> +	tca->orientation = TYPEC_ORIENTATION_NORMAL;
> +	tca->sw = tca_blk_get_typec_switch(pdev, imx_phy);
> +
> +	return tca;
> +}
> +
> +static void imx95_usb_phy_put_tca(struct imx8mq_usb_phy *imx_phy)
> +{
> +	struct tca_blk *tca = imx_phy->tca;
> +
> +	if (!tca)
> +		return;
> +
> +	tca_blk_put_typec_switch(tca->sw);
> +}
> +
>  static u32 phy_tx_vref_tune_from_property(u32 percent)
>  {
>  	percent = clamp(percent, 94U, 124U);
> @@ -315,6 +535,9 @@ static int imx8mp_usb_phy_init(struct phy *phy)
>  
>  	imx8m_phy_tune(imx_phy);
>  
> +	if (imx_phy->tca)
> +		tca_blk_init(imx_phy->tca);
> +
>  	return 0;
>  }
>  
> @@ -359,6 +582,8 @@ static const struct of_device_id imx8mq_usb_phy_of_match[] = {
>  	 .data = &imx8mq_usb_phy_ops,},
>  	{.compatible = "fsl,imx8mp-usb-phy",
>  	 .data = &imx8mp_usb_phy_ops,},
> +	{.compatible = "fsl,imx95-usb-phy",
> +	 .data = &imx8mp_usb_phy_ops,},

Okay

>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
> @@ -398,6 +623,13 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
>  
>  	phy_set_drvdata(imx_phy->phy, imx_phy);
>  
> +	if (device_is_compatible(dev, "fsl,imx95-usb-phy")) {

so future version will also have this check, so are we going to increase
this..? maybe better idea is to expand imx8mp_usb_phy_ops and add a flag
for tca support and set that for required compatible, or make this a
property?


> +		imx_phy->tca = imx95_usb_phy_get_tca(pdev, imx_phy);
> +		if (IS_ERR(imx_phy->tca))
> +			return dev_err_probe(dev, PTR_ERR(imx_phy->tca),
> +						"failed to get tca\n");
> +	}
> +
>  	imx8m_get_phy_tuning_data(imx_phy);
>  
>  	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> @@ -405,8 +637,16 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
>  	return PTR_ERR_OR_ZERO(phy_provider);
>  }
>  
> +static void imx8mq_usb_phy_remove(struct platform_device *pdev)
> +{
> +	struct imx8mq_usb_phy *imx_phy = platform_get_drvdata(pdev);
> +
> +	imx95_usb_phy_put_tca(imx_phy);
> +}
> +
>  static struct platform_driver imx8mq_usb_phy_driver = {
>  	.probe	= imx8mq_usb_phy_probe,
> +	.remove = imx8mq_usb_phy_remove,
>  	.driver = {
>  		.name	= "imx8mq-usb-phy",
>  		.of_match_table	= imx8mq_usb_phy_of_match,
> -- 
> 2.34.1

-- 
~Vinod

Re: [PATCH v3 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95

[Xu Yang]

On Thu, Aug 29, 2024 at 11:38:30PM +0530, Vinod Koul wrote:
> On 26-08-24, 15:08, Xu Yang wrote:
> > The i.MX95 USB3 phy has a Type-C Assist block (TCA). This block consists
> > two functional blocks (XBar assist and VBus assist) and one system
> > access interface using APB.
> > 
> > The primary functionality of XBar assist is:
> >  - switching lane for flip
> >  - moving unused lanes into lower power states.
> > 
> > This info can be get from:
> > i.MX95 RM Chapter 163.3.8 Type-C assist (TCA) block.
> > 
> > This will add support for TCA block to achieve lane switching and tca
> > lower power functionality.
> > 
> > Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> > Reviewed-by: Jun Li <jun.li@nxp.com>
> > 
> > ---
> > Changes in v2:
> >  - return the value of imx95_usb_phy_get_tca()
> > Changes in v3:
> >  - no changes
> > ---
> >  drivers/phy/freescale/Kconfig              |   1 +
> >  drivers/phy/freescale/phy-fsl-imx8mq-usb.c | 240 +++++++++++++++++++++
> >  2 files changed, 241 insertions(+)
> > 
> > diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> > index dcd9acff6d01..81f53564ee15 100644
> > --- a/drivers/phy/freescale/Kconfig
> > +++ b/drivers/phy/freescale/Kconfig
> > @@ -5,6 +5,7 @@ if (ARCH_MXC && ARM64) || COMPILE_TEST
> >  config PHY_FSL_IMX8MQ_USB
> >  	tristate "Freescale i.MX8M USB3 PHY"
> >  	depends on OF && HAS_IOMEM
> > +	depends on TYPEC || TYPEC=n
> >  	select GENERIC_PHY
> >  	default ARCH_MXC && ARM64
> >  
> > diff --git a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> > index adc6394626ce..8bd6d91951a2 100644
> > --- a/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> > +++ b/drivers/phy/freescale/phy-fsl-imx8mq-usb.c
> > @@ -10,6 +10,7 @@
> >  #include <linux/phy/phy.h>
> >  #include <linux/platform_device.h>
> >  #include <linux/regulator/consumer.h>
> > +#include <linux/usb/typec_mux.h>
> >  
> >  #define PHY_CTRL0			0x0
> >  #define PHY_CTRL0_REF_SSP_EN		BIT(2)
> > @@ -50,11 +51,66 @@
> >  
> >  #define PHY_TUNE_DEFAULT		0xffffffff
> >  
> > +#define TCA_CLK_RST			0x00
> > +#define TCA_CLK_RST_SW			BIT(9)
> > +#define TCA_CLK_RST_REF_CLK_EN		BIT(1)
> > +#define TCA_CLK_RST_SUSPEND_CLK_EN	BIT(0)
> > +
> > +#define TCA_INTR_EN			0x04
> > +#define TCA_INTR_STS			0x08
> > +
> > +#define TCA_GCFG			0x10
> > +#define TCA_GCFG_ROLE_HSTDEV		BIT(4)
> > +#define TCA_GCFG_OP_MODE		GENMASK(1, 0)
> > +#define TCA_GCFG_OP_MODE_SYSMODE	0
> > +#define TCA_GCFG_OP_MODE_SYNCMODE	1
> > +
> > +#define TCA_TCPC			0x14
> > +#define TCA_TCPC_VALID			BIT(4)
> > +#define TCA_TCPC_LOW_POWER_EN		BIT(3)
> > +#define TCA_TCPC_ORIENTATION_NORMAL	BIT(2)
> > +#define TCA_TCPC_MUX_CONTRL		GENMASK(1, 0)
> > +#define TCA_TCPC_MUX_CONTRL_NO_CONN	0
> > +#define TCA_TCPC_MUX_CONTRL_USB_CONN	1
> > +
> > +#define TCA_SYSMODE_CFG			0x18
> > +#define TCA_SYSMODE_TCPC_DISABLE	BIT(3)
> > +#define TCA_SYSMODE_TCPC_FLIP		BIT(2)
> > +
> > +#define TCA_CTRLSYNCMODE_CFG0		0x20
> > +#define TCA_CTRLSYNCMODE_CFG1           0x20
> > +
> > +#define TCA_PSTATE			0x30
> > +#define TCA_PSTATE_CM_STS		BIT(4)
> > +#define TCA_PSTATE_TX_STS		BIT(3)
> > +#define TCA_PSTATE_RX_PLL_STS		BIT(2)
> > +#define TCA_PSTATE_PIPE0_POWER_DOWN	GENMASK(1, 0)
> > +
> > +#define TCA_GEN_STATUS			0x34
> > +#define TCA_GEN_DEV_POR			BIT(12)
> > +#define TCA_GEN_REF_CLK_SEL		BIT(8)
> > +#define TCA_GEN_TYPEC_FLIP_INVERT	BIT(4)
> > +#define TCA_GEN_PHY_TYPEC_DISABLE	BIT(3)
> > +#define TCA_GEN_PHY_TYPEC_FLIP		BIT(2)
> > +
> > +#define TCA_VBUS_CTRL			0x40
> > +#define TCA_VBUS_STATUS			0x44
> > +
> > +#define TCA_INFO			0xFC
> > +
> > +struct tca_blk {
> > +	struct typec_switch_dev *sw;
> > +	void __iomem *base;
> > +	struct mutex mutex;
> > +	enum typec_orientation orientation;
> > +};
> > +
> >  struct imx8mq_usb_phy {
> >  	struct phy *phy;
> >  	struct clk *clk;
> >  	void __iomem *base;
> >  	struct regulator *vbus;
> > +	struct tca_blk *tca;
> >  	u32 pcs_tx_swing_full;
> >  	u32 pcs_tx_deemph_3p5db;
> >  	u32 tx_vref_tune;
> > @@ -64,6 +120,170 @@ struct imx8mq_usb_phy {
> >  	u32 comp_dis_tune;
> >  };
> >  
> > +
> > +static void tca_blk_orientation_set(struct tca_blk *tca,
> > +				enum typec_orientation orientation);
> > +
> > +#ifdef CONFIG_TYPEC
> > +
> > +static int tca_blk_typec_switch_set(struct typec_switch_dev *sw,
> > +				enum typec_orientation orientation)
> > +{
> > +	struct imx8mq_usb_phy *imx_phy = typec_switch_get_drvdata(sw);
> > +	struct tca_blk *tca = imx_phy->tca;
> > +	int ret;
> > +
> > +	if (tca->orientation == orientation)
> > +		return 0;
> > +
> > +	ret = clk_prepare_enable(imx_phy->clk);
> > +	if (ret)
> > +		return ret;
> > +
> > +	tca_blk_orientation_set(tca, orientation);
> > +	clk_disable_unprepare(imx_phy->clk);
> > +
> > +	return 0;
> > +}
> > +
> > +static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev,
> > +					struct imx8mq_usb_phy *imx_phy)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct typec_switch_dev *sw;
> > +	struct typec_switch_desc sw_desc = { };
> > +
> > +	sw_desc.drvdata = imx_phy;
> > +	sw_desc.fwnode = dev->fwnode;
> > +	sw_desc.set = tca_blk_typec_switch_set;
> > +	sw_desc.name = NULL;
> > +
> > +	sw = typec_switch_register(dev, &sw_desc);
> > +	if (IS_ERR(sw)) {
> > +		dev_err(dev, "Error register tca orientation switch: %ld",
> > +				PTR_ERR(sw));
> > +		return NULL;
> > +	}
> > +
> > +	return sw;
> > +}
> > +
> > +static void tca_blk_put_typec_switch(struct typec_switch_dev *sw)
> > +{
> > +	typec_switch_unregister(sw);
> > +}
> > +
> > +#else
> > +
> > +static struct typec_switch_dev *tca_blk_get_typec_switch(struct platform_device *pdev,
> > +			struct imx8mq_usb_phy *imx_phy)
> > +{
> > +	return NULL;
> > +}
> > +
> > +static void tca_blk_put_typec_switch(struct typec_switch_dev *sw) {}
> > +
> > +#endif /* CONFIG_TYPEC */
> > +
> > +static void tca_blk_orientation_set(struct tca_blk *tca,
> > +				enum typec_orientation orientation)
> > +{
> > +	u32 val;
> > +
> > +	mutex_lock(&tca->mutex);
> > +
> > +	if (orientation == TYPEC_ORIENTATION_NONE) {
> > +		/*
> > +		 * use Controller Synced Mode for TCA low power enable and
> > +		 * put PHY to USB safe state.
> > +		 */
> > +		val = readl(tca->base + TCA_GCFG);
> > +		val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYNCMODE);
> > +		writel(val, tca->base + TCA_GCFG);
> > +
> > +		val = readl(tca->base + TCA_TCPC);
> > +		val = TCA_TCPC_VALID | TCA_TCPC_LOW_POWER_EN;
> > +		writel(val, tca->base + TCA_TCPC);
> > +
> > +		goto out;
> > +	}
> > +
> > +	/* use System Configuration Mode for TCA mux control. */
> > +	val = readl(tca->base + TCA_GCFG);
> > +	val = FIELD_PREP(TCA_GCFG_OP_MODE, TCA_GCFG_OP_MODE_SYSMODE);
> > +	writel(val, tca->base + TCA_GCFG);
> > +
> > +	/* Disable TCA module */
> > +	val = readl(tca->base + TCA_SYSMODE_CFG);
> > +	val |= TCA_SYSMODE_TCPC_DISABLE;
> > +	writel(val, tca->base + TCA_SYSMODE_CFG);
> > +
> > +	if (orientation == TYPEC_ORIENTATION_REVERSE)
> > +		val |= TCA_SYSMODE_TCPC_FLIP;
> > +	else if (orientation == TYPEC_ORIENTATION_NORMAL)
> > +		val &= ~TCA_SYSMODE_TCPC_FLIP;
> > +
> > +	writel(val, tca->base + TCA_SYSMODE_CFG);
> > +
> > +	/* Enable TCA module */
> > +	val &= ~TCA_SYSMODE_TCPC_DISABLE;
> > +	writel(val, tca->base + TCA_SYSMODE_CFG);
> > +
> > +out:
> > +	tca->orientation = orientation;
> > +	mutex_unlock(&tca->mutex);
> > +}
> > +
> > +static void tca_blk_init(struct tca_blk *tca)
> > +{
> > +	u32 val;
> > +
> > +	/* reset XBar block */
> > +	val = readl(tca->base + TCA_CLK_RST);
> > +	val &= ~TCA_CLK_RST_SW;
> > +	writel(val, tca->base + TCA_CLK_RST);
> > +
> > +	udelay(100);
> > +
> > +	/* clear reset */
> > +	val |= TCA_CLK_RST_SW;
> > +	writel(val, tca->base + TCA_CLK_RST);
> > +
> > +	tca_blk_orientation_set(tca, tca->orientation);
> > +}
> > +
> > +static struct tca_blk *imx95_usb_phy_get_tca(struct platform_device *pdev,
> > +				struct imx8mq_usb_phy *imx_phy)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct tca_blk *tca;
> > +
> > +	tca = devm_kzalloc(dev, sizeof(*tca), GFP_KERNEL);
> > +	if (!tca)
> > +		return ERR_PTR(-ENOMEM);
> > +
> > +	tca->base = devm_platform_ioremap_resource(pdev, 1);
> > +	if (IS_ERR(tca->base))
> > +		return tca->base;
> > +
> > +	mutex_init(&tca->mutex);
> > +
> > +	tca->orientation = TYPEC_ORIENTATION_NORMAL;
> > +	tca->sw = tca_blk_get_typec_switch(pdev, imx_phy);
> > +
> > +	return tca;
> > +}
> > +
> > +static void imx95_usb_phy_put_tca(struct imx8mq_usb_phy *imx_phy)
> > +{
> > +	struct tca_blk *tca = imx_phy->tca;
> > +
> > +	if (!tca)
> > +		return;
> > +
> > +	tca_blk_put_typec_switch(tca->sw);
> > +}
> > +
> >  static u32 phy_tx_vref_tune_from_property(u32 percent)
> >  {
> >  	percent = clamp(percent, 94U, 124U);
> > @@ -315,6 +535,9 @@ static int imx8mp_usb_phy_init(struct phy *phy)
> >  
> >  	imx8m_phy_tune(imx_phy);
> >  
> > +	if (imx_phy->tca)
> > +		tca_blk_init(imx_phy->tca);
> > +
> >  	return 0;
> >  }
> >  
> > @@ -359,6 +582,8 @@ static const struct of_device_id imx8mq_usb_phy_of_match[] = {
> >  	 .data = &imx8mq_usb_phy_ops,},
> >  	{.compatible = "fsl,imx8mp-usb-phy",
> >  	 .data = &imx8mp_usb_phy_ops,},
> > +	{.compatible = "fsl,imx95-usb-phy",
> > +	 .data = &imx8mp_usb_phy_ops,},
> 
> Okay
> 
> >  	{ }
> >  };
> >  MODULE_DEVICE_TABLE(of, imx8mq_usb_phy_of_match);
> > @@ -398,6 +623,13 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
> >  
> >  	phy_set_drvdata(imx_phy->phy, imx_phy);
> >  
> > +	if (device_is_compatible(dev, "fsl,imx95-usb-phy")) {
> 
> so future version will also have this check, so are we going to increase
> this..? maybe better idea is to expand imx8mp_usb_phy_ops and add a flag
> for tca support and set that for required compatible, or make this a
> property?

Ok. It seems like a potential issue. Your advice sounds good. Will try it.

Thanks,
Xu Yang

> 
> 
> > +		imx_phy->tca = imx95_usb_phy_get_tca(pdev, imx_phy);
> > +		if (IS_ERR(imx_phy->tca))
> > +			return dev_err_probe(dev, PTR_ERR(imx_phy->tca),
> > +						"failed to get tca\n");
> > +	}
> > +
> >  	imx8m_get_phy_tuning_data(imx_phy);
> >  
> >  	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> > @@ -405,8 +637,16 @@ static int imx8mq_usb_phy_probe(struct platform_device *pdev)
> >  	return PTR_ERR_OR_ZERO(phy_provider);
> >  }
> >  
> > +static void imx8mq_usb_phy_remove(struct platform_device *pdev)
> > +{
> > +	struct imx8mq_usb_phy *imx_phy = platform_get_drvdata(pdev);
> > +
> > +	imx95_usb_phy_put_tca(imx_phy);
> > +}
> > +
> >  static struct platform_driver imx8mq_usb_phy_driver = {
> >  	.probe	= imx8mq_usb_phy_probe,
> > +	.remove = imx8mq_usb_phy_remove,
> >  	.driver = {
> >  		.name	= "imx8mq-usb-phy",
> >  		.of_match_table	= imx8mq_usb_phy_of_match,
> > -- 
> > 2.34.1
> 
> -- 
> ~Vinod

[PATCH v3 4/5] arm64: dts: imx95: add usb3 related nodes

[Xu Yang]

Add usb3 phy and controller nodes for imx95.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - no changes
Changes in v3:
 - no changes
---
 arch/arm64/boot/dts/freescale/imx95.dtsi | 43 ++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 1bbf9a0468f6..06a7c2f1e211 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -1188,5 +1188,48 @@ pcie1_ep: pcie-ep@4c380000 {
 			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
 			status = "disabled";
 		};
+
+		usb3_phy: phy@4c1f0040 {
+			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
+			reg = <0x0 0x4c1f0040 0x0 0x40>,
+			      <0x0 0x4c1fc000 0x0 0x100>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>;
+			clock-names = "phy";
+			#phy-cells = <0>;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			orientation-switch;
+			status = "disabled";
+		};
+
+		usb3: usb@4c010010 {
+			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
+			reg = <0x0 0x4c010010 0x0 0x04>,
+			      <0x0 0x4c1f0000 0x0 0x20>;
+			clocks = <&scmi_clk IMX95_CLK_HSIO>,
+				 <&scmi_clk IMX95_CLK_32K>;
+			clock-names = "hsio", "suspend";
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
+			dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+			status = "disabled";
+
+			usb3_dwc3: usb@4c100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x4c100000 0x0 0x10000>;
+				clocks = <&scmi_clk IMX95_CLK_HSIO>,
+					 <&scmi_clk IMX95_CLK_24M>,
+					 <&scmi_clk IMX95_CLK_32K>;
+				clock-names = "bus_early", "ref", "suspend";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>, <&usb3_phy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,gfladj-refclk-lpm-sel-quirk;
+				snps,parkmode-disable-ss-quirk;
+				iommus = <&smmu 0xe>;
+			};
+		};
 	};
 };
-- 
2.34.1

Re: [PATCH v3 4/5] arm64: dts: imx95: add usb3 related nodes

[Shawn Guo]

On Mon, Aug 26, 2024 at 03:08:53PM +0800, Xu Yang wrote:
> Add usb3 phy and controller nodes for imx95.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---
> Changes in v2:
>  - no changes
> Changes in v3:
>  - no changes
> ---
>  arch/arm64/boot/dts/freescale/imx95.dtsi | 43 ++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> index 1bbf9a0468f6..06a7c2f1e211 100644
> --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -1188,5 +1188,48 @@ pcie1_ep: pcie-ep@4c380000 {
>  			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
>  			status = "disabled";
>  		};
> +
> +		usb3_phy: phy@4c1f0040 {
> +			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
> +			reg = <0x0 0x4c1f0040 0x0 0x40>,
> +			      <0x0 0x4c1fc000 0x0 0x100>;
> +			clocks = <&scmi_clk IMX95_CLK_HSIO>;
> +			clock-names = "phy";
> +			#phy-cells = <0>;
> +			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> +			orientation-switch;
> +			status = "disabled";
> +		};
> +
> +		usb3: usb@4c010010 {

Please try to sort nodes with unit-address in the address.

Shawn

> +			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
> +			reg = <0x0 0x4c010010 0x0 0x04>,
> +			      <0x0 0x4c1f0000 0x0 0x20>;
> +			clocks = <&scmi_clk IMX95_CLK_HSIO>,
> +				 <&scmi_clk IMX95_CLK_32K>;
> +			clock-names = "hsio", "suspend";
> +			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> +			dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
> +			status = "disabled";
> +
> +			usb3_dwc3: usb@4c100000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x0 0x4c100000 0x0 0x10000>;
> +				clocks = <&scmi_clk IMX95_CLK_HSIO>,
> +					 <&scmi_clk IMX95_CLK_24M>,
> +					 <&scmi_clk IMX95_CLK_32K>;
> +				clock-names = "bus_early", "ref", "suspend";
> +				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb3_phy>, <&usb3_phy>;
> +				phy-names = "usb2-phy", "usb3-phy";
> +				snps,gfladj-refclk-lpm-sel-quirk;
> +				snps,parkmode-disable-ss-quirk;
> +				iommus = <&smmu 0xe>;
> +			};
> +		};
>  	};
>  };
> -- 
> 2.34.1
> 

Re: [PATCH v3 4/5] arm64: dts: imx95: add usb3 related nodes

[Xu Yang]

On Sun, Sep 01, 2024 at 04:07:01PM +0800, Shawn Guo wrote:
> On Mon, Aug 26, 2024 at 03:08:53PM +0800, Xu Yang wrote:
> > Add usb3 phy and controller nodes for imx95.
> > 
> > Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> > 
> > ---
> > Changes in v2:
> >  - no changes
> > Changes in v3:
> >  - no changes
> > ---
> >  arch/arm64/boot/dts/freescale/imx95.dtsi | 43 ++++++++++++++++++++++++
> >  1 file changed, 43 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
> > index 1bbf9a0468f6..06a7c2f1e211 100644
> > --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> > @@ -1188,5 +1188,48 @@ pcie1_ep: pcie-ep@4c380000 {
> >  			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> >  			status = "disabled";
> >  		};
> > +
> > +		usb3_phy: phy@4c1f0040 {
> > +			compatible = "fsl,imx95-usb-phy", "fsl,imx8mp-usb-phy";
> > +			reg = <0x0 0x4c1f0040 0x0 0x40>,
> > +			      <0x0 0x4c1fc000 0x0 0x100>;
> > +			clocks = <&scmi_clk IMX95_CLK_HSIO>;
> > +			clock-names = "phy";
> > +			#phy-cells = <0>;
> > +			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> > +			orientation-switch;
> > +			status = "disabled";
> > +		};
> > +
> > +		usb3: usb@4c010010 {
> 
> Please try to sort nodes with unit-address in the address.

Okay. Will fix it.

Thanks,
Xu Yang

> 
> Shawn
> 
> > +			compatible = "fsl,imx95-dwc3", "fsl,imx8mp-dwc3";
> > +			reg = <0x0 0x4c010010 0x0 0x04>,
> > +			      <0x0 0x4c1f0000 0x0 0x20>;
> > +			clocks = <&scmi_clk IMX95_CLK_HSIO>,
> > +				 <&scmi_clk IMX95_CLK_32K>;
> > +			clock-names = "hsio", "suspend";
> > +			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
> > +			#address-cells = <2>;
> > +			#size-cells = <2>;
> > +			ranges;
> > +			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
> > +			dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
> > +			status = "disabled";
> > +
> > +			usb3_dwc3: usb@4c100000 {
> > +				compatible = "snps,dwc3";
> > +				reg = <0x0 0x4c100000 0x0 0x10000>;
> > +				clocks = <&scmi_clk IMX95_CLK_HSIO>,
> > +					 <&scmi_clk IMX95_CLK_24M>,
> > +					 <&scmi_clk IMX95_CLK_32K>;
> > +				clock-names = "bus_early", "ref", "suspend";
> > +				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
> > +				phys = <&usb3_phy>, <&usb3_phy>;
> > +				phy-names = "usb2-phy", "usb3-phy";
> > +				snps,gfladj-refclk-lpm-sel-quirk;
> > +				snps,parkmode-disable-ss-quirk;
> > +				iommus = <&smmu 0xe>;
> > +			};
> > +		};
> >  	};
> >  };
> > -- 
> > 2.34.1
> > 
> 

[PATCH v3 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node

[Xu Yang]

This board has one Type-C port which has USB3 capability. This will
add typec nodes and enable usb3 node.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v2:
 - no changes
Changes in v3:
 - no changes
---
 .../boot/dts/freescale/imx95-19x19-evk.dts    | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index d14a54ab4fd4..46a9cd3d4403 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx95.dtsi"
 
 / {
@@ -99,6 +100,48 @@ i2c7_pcal6524: i2c7-gpio@22 {
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 0, PDO_FIXED_USB_COMM)>;
+			op-sink-microwatt = <0>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &lpuart1 {
@@ -128,6 +171,38 @@ &pcie1 {
 	status = "okay";
 };
 
+&usb3 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usb3_dwc3 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	role-switch-default-mode = "peripheral";
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
 &usdhc1 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
 	pinctrl-0 = <&pinctrl_usdhc1>;
@@ -245,6 +320,12 @@ IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7		0x31e
 		>;
 	};
 
+	pinctrl_typec: typecgrp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
 	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
 		fsl,pins = <
 			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0		0x31e
-- 
2.34.1