From: Frank Li <Frank.li@nxp.com>
To: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: alice.guo@nxp.com, festevam@gmail.com, imx@lists.linux.dev,
kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux@roeck-us.net, s.hauer@pengutronix.de, shawnguo@kernel.org,
wim@linux-watchdog.org, ye.li@nxp.com
Subject: Re: [PATCH v5 1/1] watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature
Date: Tue, 10 Sep 2024 15:28:19 -0400 [thread overview]
Message-ID: <ZuCd0xTZ29meorYy@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <ZtDvk02cvKCemYbN@lizhi-Precision-Tower-5810>
On Thu, Aug 29, 2024 at 06:00:51PM -0400, Frank Li wrote:
> On Tue, Jul 30, 2024 at 10:56:10AM -0400, Frank Li wrote:
> > Move post_rcs_wait into struct imx_wdt_hw_feature to simple code logic for
> > difference compatible string.
> >
> > i.MX93 watchdog needn't wait 2.5 clocks after RCS is done. So needn't set
> > post_rcs_wait.
> >
> > Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> > Signed-off-by: Alice Guo <alice.guo@nxp.com>
> > Reviewed-by: Ye Li <ye.li@nxp.com>
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
Wim Van Sebroeck:
Could you please take care this patch?
Frank
>
> Ping?
>
> Frank
>
> > Change from v4 to v5
> > - move compatible string 8ulp under 7ulp
> > Chagne from v3 to v4:
> > - Go back to v2 according to Guenter's feedback
> > Change from v2 to v3:
> > - Set post_rcs_wait to false explicitly to maintain code consistency
> > - Add Guenter review tag.
> > Change from v1 to v2:
> > - Combine to one patch
> > ---
> > drivers/watchdog/imx7ulp_wdt.c | 21 +++++++++------------
> > 1 file changed, 9 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
> > index 94914a22daff7..0f13a30533574 100644
> > --- a/drivers/watchdog/imx7ulp_wdt.c
> > +++ b/drivers/watchdog/imx7ulp_wdt.c
> > @@ -55,6 +55,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> >
> > struct imx_wdt_hw_feature {
> > bool prescaler_enable;
> > + bool post_rcs_wait;
> > u32 wdog_clock_rate;
> > };
> >
> > @@ -62,7 +63,6 @@ struct imx7ulp_wdt_device {
> > struct watchdog_device wdd;
> > void __iomem *base;
> > struct clk *clk;
> > - bool post_rcs_wait;
> > bool ext_reset;
> > const struct imx_wdt_hw_feature *hw;
> > };
> > @@ -95,7 +95,7 @@ static int imx7ulp_wdt_wait_rcs(struct imx7ulp_wdt_device *wdt)
> > ret = -ETIMEDOUT;
> >
> > /* Wait 2.5 clocks after RCS done */
> > - if (wdt->post_rcs_wait)
> > + if (wdt->hw->post_rcs_wait)
> > usleep_range(wait_min, wait_min + 2000);
> >
> > return ret;
> > @@ -334,15 +334,6 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
> > /* The WDOG may need to do external reset through dedicated pin */
> > imx7ulp_wdt->ext_reset = of_property_read_bool(dev->of_node, "fsl,ext-reset-output");
> >
> > - imx7ulp_wdt->post_rcs_wait = true;
> > - if (of_device_is_compatible(dev->of_node,
> > - "fsl,imx8ulp-wdt")) {
> > - dev_info(dev, "imx8ulp wdt probe\n");
> > - imx7ulp_wdt->post_rcs_wait = false;
> > - } else {
> > - dev_info(dev, "imx7ulp wdt probe\n");
> > - }
> > -
> > wdog = &imx7ulp_wdt->wdd;
> > wdog->info = &imx7ulp_wdt_info;
> > wdog->ops = &imx7ulp_wdt_ops;
> > @@ -403,6 +394,12 @@ static const struct dev_pm_ops imx7ulp_wdt_pm_ops = {
> > static const struct imx_wdt_hw_feature imx7ulp_wdt_hw = {
> > .prescaler_enable = false,
> > .wdog_clock_rate = 1000,
> > + .post_rcs_wait = true,
> > +};
> > +
> > +static const struct imx_wdt_hw_feature imx8ulp_wdt_hw = {
> > + .prescaler_enable = false,
> > + .wdog_clock_rate = 1000,
> > };
> >
> > static const struct imx_wdt_hw_feature imx93_wdt_hw = {
> > @@ -411,8 +408,8 @@ static const struct imx_wdt_hw_feature imx93_wdt_hw = {
> > };
> >
> > static const struct of_device_id imx7ulp_wdt_dt_ids[] = {
> > - { .compatible = "fsl,imx8ulp-wdt", .data = &imx7ulp_wdt_hw, },
> > { .compatible = "fsl,imx7ulp-wdt", .data = &imx7ulp_wdt_hw, },
> > + { .compatible = "fsl,imx8ulp-wdt", .data = &imx8ulp_wdt_hw, },
> > { .compatible = "fsl,imx93-wdt", .data = &imx93_wdt_hw, },
> > { /* sentinel */ }
> > };
> > --
> > 2.34.1
> >
next prev parent reply other threads:[~2024-09-10 19:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-30 14:56 [PATCH v5 1/1] watchdog: imx7ulp_wdt: move post_rcs_wait into struct imx_wdt_hw_feature Frank Li
2024-08-29 22:00 ` Frank Li
2024-09-10 19:28 ` Frank Li [this message]
2024-09-13 8:32 ` Wim Van Sebroeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZuCd0xTZ29meorYy@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=alice.guo@nxp.com \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=wim@linux-watchdog.org \
--cc=ye.li@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox