From: Frank Li <Frank.li@nxp.com>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: "Rob Herring" <robh@kernel.org>,
"Saravana Kannan" <saravanak@google.com>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Richard Zhu" <hongxing.zhu@nxp.com>,
"Lucas Stach" <l.stach@pengutronix.de>,
"Shawn Guo" <shawnguo@kernel.org>,
"Sascha Hauer" <s.hauer@pengutronix.de>,
"Pengutronix Kernel Team" <kernel@pengutronix.de>,
"Fabio Estevam" <festevam@gmail.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
imx@lists.linux.dev
Subject: Re: [PATCH v2 1/3] of: address: Add cpu_untranslate_addr to struct of_pci_range
Date: Sat, 28 Sep 2024 02:49:05 -0400 [thread overview]
Message-ID: <Zvem4SUAC+FW+WkL@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20240927235117.GA98484@bhelgaas>
On Fri, Sep 27, 2024 at 06:51:17PM -0500, Bjorn Helgaas wrote:
> On Thu, Sep 26, 2024 at 12:47:13PM -0400, Frank Li wrote:
> > Introduce field 'cpu_untranslate_addr' in of_pci_range to retrieve
> > untranslated CPU address information. This is required for hardware like
> > i.MX8QXP to configure the PCIe controller ATU and eliminate the need for
> > workaround address fixups in drivers. Currently, many drivers use
> > hardcoded CPU addresses for fixups, but this information is already
> > described in the Device Tree. With correct hardware descriptions, such
> > fixups can be removed.
>
> Instead of saying "required for hardware like i.MX8QXP", can we say
> something specific about what this kind of hardware *does* that
> requires this?
>
> I *think* the point is that there's some address translation being
> done between the primary and secondary sides of some bridge.
>
> I think "many drivers use hardcoded CPU addresses for fixups"
> basically means the .cpu_addr_fixup() callback hardcodes that
> translation in the code, e.g., "cpu_addr & CDNS_PLAT_CPU_TO_BUS_ADDR",
> "cpu_addr + BUS_IATU_OFFSET", etc, even though those translations
> *should* be described via DT.
>
> > ┌─────────┐ ┌────────────┐
> > ┌─────┐ │ │ IA: 0x8ff0_0000 │ │
> > │ CPU ├───►│ BUS ├─────────────────┐ │ PCI │
> > └─────┘ │ │ IA: 0x8ff8_0000 │ │ │
> > CPU Addr │ Fabric ├─────────────┐ │ │ Controller │
> > 0x7000_0000 │ │ │ │ │ │
> > │ │ │ │ │ │ PCI Addr
> > │ │ │ └──► CfgSpace ─┼────────────►
> > │ ├─────────┐ │ │ │ 0
> > │ │ │ │ │ │
> > └─────────┘ │ └──────► IOSpace ─┼────────────►
> > │ │ │ 0
> > │ │ │
> > └──────────► MemSpace ─┼────────────►
> > IA: 0x8000_0000 │ │ 0x8000_0000
> > └────────────┘
>
> What does "IA" stand for?
internal address
>
> I don't quite understand the mapping done by the "BUS Fabric" block.
> It looks like you're saying the CPU Addr 0x7000_0000 is translated to
> all three of IA 0x8ff0_0000, IA 0x8ff8_0000, and IA 0x8000_0000, but
> that doesn't seem right.
0x7000_0000 --> 0x8000_0000
0x7ff0_0000 --> 0x8ff0_0000
0x7ff8_0000 --> 0x8ff8_0000
I can update diagram at next version
>
> > bus@5f000000 {
> > compatible = "simple-bus";
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x5f000000 0x0 0x5f000000 0x21000000>,
> > <0x80000000 0x0 0x70000000 0x10000000>;
> >
> > pcieb: pcie@5f010000 {
> > compatible = "fsl,imx8q-pcie";
> > reg = <0x5f010000 0x10000>, <0x8ff00000 0x80000>;
> > reg-names = "dbi", "config";
> > #address-cells = <3>;
> > #size-cells = <2>;
> > device_type = "pci";
> > bus-range = <0x00 0xff>;
> > ranges = <0x81000000 0 0x00000000 0x8ff80000 0 0x00010000>,
> > <0x82000000 0 0x80000000 0x80000000 0 0x0ff00000>;
> > ...
> > };
> > };
> >
> > 'cpu_untranslate_addr' in of_pci_range can indicate above diagram IA
> > address information.
> >
> > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > ---
> > Change from v1 to v2
> > - add cpu_untranslate_addr in of_pci_range, instead adding new API.
> > ---
> > drivers/of/address.c | 2 ++
> > include/linux/of_address.h | 1 +
> > 2 files changed, 3 insertions(+)
> >
> > diff --git a/drivers/of/address.c b/drivers/of/address.c
> > index 286f0c161e332..f4cb82f5313cf 100644
> > --- a/drivers/of/address.c
> > +++ b/drivers/of/address.c
> > @@ -811,6 +811,8 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
> > else
> > range->cpu_addr = of_translate_address(parser->node,
> > parser->range + na);
> > +
> > + range->cpu_untranslate_addr = of_read_number(parser->range + na, parser->pna);
> > range->size = of_read_number(parser->range + parser->pna + na, ns);
> >
> > parser->range += np;
> > diff --git a/include/linux/of_address.h b/include/linux/of_address.h
> > index 26a19daf0d092..0683ce0c07f68 100644
> > --- a/include/linux/of_address.h
> > +++ b/include/linux/of_address.h
> > @@ -26,6 +26,7 @@ struct of_pci_range {
> > u64 bus_addr;
> > };
> > u64 cpu_addr;
> > + u64 cpu_untranslate_addr;
> > u64 size;
> > u32 flags;
> > };
> >
> > --
> > 2.34.1
> >
next prev parent reply other threads:[~2024-09-28 6:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-26 16:47 [PATCH v2 0/3] PCI: dwc: opitimaze RC host pci_fixup_addr() Frank Li
2024-09-26 16:47 ` [PATCH v2 1/3] of: address: Add cpu_untranslate_addr to struct of_pci_range Frank Li
2024-09-27 22:18 ` Rob Herring
2024-09-27 23:51 ` Bjorn Helgaas
2024-09-28 6:49 ` Frank Li [this message]
2024-09-26 16:47 ` [PATCH v2 2/3] PCI: dwc: Using cpu_untranslate_addr in of_range to eliminate cpu_addr_fixup() Frank Li
2024-09-26 16:47 ` [PATCH v2 3/3] PCI: imx6: Remove cpu_addr_fixup() Frank Li
2024-09-27 23:54 ` Bjorn Helgaas
2024-09-28 6:43 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Zvem4SUAC+FW+WkL@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=helgaas@kernel.org \
--cc=hongxing.zhu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=jingoohan1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=kw@linux.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=saravanak@google.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox