From: Shawn Guo <shawnguo2@yeah.net>
To: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<imx@lists.linux.dev>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node
Date: Mon, 21 Oct 2024 11:01:23 +0800 [thread overview]
Message-ID: <ZxXEA9TdHX5sEoEt@dragon> (raw)
In-Reply-To: <20240930212604.118756-2-Frank.Li@nxp.com>
On Mon, Sep 30, 2024 at 05:25:59PM -0400, Frank Li wrote:
> Add audio codec cs42888 and related node.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dtb: esai@59010000: Unevaluated properties are not allowed ('power-domains' was unexpected)
> update binding patch already sent
> https://lore.kernel.org/linux-devicetree/20240927205618.4093591-1-Frank.Li@nxp.com/#R
> ---
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 84 +++++++++++++++++++
> 1 file changed, 84 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> index d8d9e2883caf7..9b9ad389a807a 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> @@ -50,6 +50,13 @@ usb3_data_ss: endpoint {
> };
> };
>
> + reg_audio: regulator-audio {
> + compatible = "regulator-fixed";
> + regulator-max-microvolt = <3300000>;
> + regulator-min-microvolt = <3300000>;
> + regulator-name = "cs42888_supply";
> + };
> +
> sound-bt-sco {
> compatible = "simple-audio-card";
> simple-audio-card,bitclock-inversion;
> @@ -69,6 +76,28 @@ btcpu: simple-audio-card,cpu {
> };
> };
>
> + sound-cs42888 {
> + compatible = "fsl,imx-audio-cs42888";
> + audio-asrc = <&asrc0>;
> + audio-codec = <&cs42888>;
> + audio-cpu = <&esai0>;
> + audio-routing =
> + "Line Out Jack", "AOUT1L",
> + "Line Out Jack", "AOUT1R",
> + "Line Out Jack", "AOUT2L",
> + "Line Out Jack", "AOUT2R",
> + "Line Out Jack", "AOUT3L",
> + "Line Out Jack", "AOUT3R",
> + "Line Out Jack", "AOUT4L",
> + "Line Out Jack", "AOUT4R",
> + "AIN1L", "Line In Jack",
> + "AIN1R", "Line In Jack",
> + "AIN2L", "Line In Jack",
> + "AIN2R", "Line In Jack";
> + model = "imx-cs42888";
> + status = "okay";
Unneeded "okay" status.
> + };
> +
> sound-wm8960 {
> compatible = "fsl,imx-audio-wm8960";
> model = "wm8960-audio";
> @@ -86,6 +115,15 @@ sound-wm8960 {
> };
> };
>
> +&amix {
> + status = "okay";
> +};
> +
> +&asrc0 {
> + fsl,asrc-rate = <48000>;
Double space before =
Shawn
> + status = "okay";
> +};
> +
> &dsp {
> memory-region = <&dsp_reserved>;
> status = "okay";
> @@ -95,6 +133,19 @@ &dsp_reserved {
> status = "okay";
> };
>
> +&esai0 {
> + assigned-clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&esai0_lpcg 0>;
> + assigned-clock-parents = <&aud_pll_div0_lpcg 0>;
> + assigned-clock-rates = <0>, <786432000>, <49152000>, <12288000>, <49152000>;
> + pinctrl-0 = <&pinctrl_esai0>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> &fec1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_fec1>;
> @@ -264,6 +315,24 @@ pca6416: gpio@20 {
> gpio-controller;
> #gpio-cells = <2>;
> };
> +
> + cs42888: audio-codec@48 {
> + compatible = "cirrus,cs42888";
> + reg = <0x48>;
> + clocks = <&mclkout0_lpcg 0>;
> + clock-names = "mclk";
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&mclkout0_lpcg 0>;
> + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
> + reset-gpios = <&pca9557_b 1 GPIO_ACTIVE_LOW>;
> + VA-supply = <®_audio>;
> + VD-supply = <®_audio>;
> + VLC-supply = <®_audio>;
> + VLS-supply = <®_audio>;
> +
> + };
> };
>
> &cm40_intmux {
> @@ -458,6 +527,21 @@ IMX8QXP_ADC_IN0_LSIO_GPIO1_IO10 0xc600004c
> >;
> };
>
> + pinctrl_esai0: esai0grp {
> + fsl,pins = <
> + IMX8QXP_ESAI0_FSR_ADMA_ESAI0_FSR 0xc6000040
> + IMX8QXP_ESAI0_FST_ADMA_ESAI0_FST 0xc6000040
> + IMX8QXP_ESAI0_SCKR_ADMA_ESAI0_SCKR 0xc6000040
> + IMX8QXP_ESAI0_SCKT_ADMA_ESAI0_SCKT 0xc6000040
> + IMX8QXP_ESAI0_TX0_ADMA_ESAI0_TX0 0xc6000040
> + IMX8QXP_ESAI0_TX1_ADMA_ESAI0_TX1 0xc6000040
> + IMX8QXP_ESAI0_TX2_RX3_ADMA_ESAI0_TX2_RX3 0xc6000040
> + IMX8QXP_ESAI0_TX3_RX2_ADMA_ESAI0_TX3_RX2 0xc6000040
> + IMX8QXP_ESAI0_TX4_RX1_ADMA_ESAI0_TX4_RX1 0xc6000040
> + IMX8QXP_ESAI0_TX5_RX0_ADMA_ESAI0_TX5_RX0 0xc6000040
> + >;
> + };
> +
> pinctrl_fec1: fec1grp {
> fsl,pins = <
> IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
> --
> 2.34.1
>
next prev parent reply other threads:[~2024-10-21 3:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-30 21:25 [PATCH 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Frank Li
2024-09-30 21:25 ` [PATCH 2/6] arm64: dts: imx8qxp-mek: add esai, cs42888 and related node Frank Li
2024-10-21 3:01 ` Shawn Guo [this message]
2024-09-30 21:26 ` [PATCH 3/6] arm64: dts: imx8qxp-mek: enable jpeg encode and deconde Frank Li
2024-09-30 21:26 ` [PATCH 4/6] arm64: dts: imx8qxp-mek: add flexcan1 and flexcan2 Frank Li
2024-09-30 21:26 ` [PATCH 5/6] arm64: dts: imx8qxp-mek: add usbotg1 and related node Frank Li
2024-09-30 21:26 ` [PATCH 6/6] arm64: dts: imx8qxp-mek: add cm4 and related nodes Frank Li
2024-10-21 3:06 ` Shawn Guo
2024-10-02 3:51 ` [PATCH 1/6] arm64: dts: imx8qxp-mek: add bluetooth audio codec Rob Herring (Arm)
2024-10-18 19:39 ` Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZxXEA9TdHX5sEoEt@dragon \
--to=shawnguo2@yeah.net \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox