From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Fri, 1 Sep 2017 19:11:01 -0700 Subject: [PATCH 2/2] ARM: dts: Add the PWM node to Cygnus In-Reply-To: References: <20170831185416.8181-1-eric@anholt.net> <20170831185416.8181-2-eric@anholt.net> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 08/31/2017 01:10 PM, Scott Branden wrote: > pwm node is correct. > > > On 17-08-31 11:54 AM, Eric Anholt wrote: >> This is connected up to the backlight on 911360_entphn, which we'll >> need for a panel driver. For now, leave the node disabled in the >> shared dtsi. >> >> Signed-off-by: Eric Anholt > Acked-by: Scott Branden Applied to devicetree/next: https://github.com/Broadcom/stblinux/commit/31807d46f85c4d86ef3b6df9c5a4e69d35f75bc0 >> --- >> arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> >> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi >> b/arch/arm/boot/dts/bcm-cygnus.dtsi >> index 74f73ff24aec..b9a654d733ae 100644 >> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi >> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi >> @@ -585,6 +585,14 @@ >> status = "disabled"; >> }; >> + pwm: pwm at 180aa500 { >> + compatible = "brcm,kona-pwm"; >> + reg = <0x180aa500 0xc4>; >> + #pwm-cells = <3>; >> + clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>; >> + status = "disabled"; >> + }; >> + >> keypad: keypad at 180ac000 { >> compatible = "brcm,bcm-keypad"; >> reg = <0x180ac000 0x14c>; > -- Florian