From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@roeck-us.net (Guenter Roeck) Date: Fri, 24 Feb 2017 07:32:47 -0800 Subject: [PATCH 1/8] watchdog: s3c2410: Remove confusing CONFIG prefix from local defines In-Reply-To: <20170224151122.12142-2-krzk@kernel.org> References: <20170224151122.12142-1-krzk@kernel.org> <20170224151122.12142-2-krzk@kernel.org> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 02/24/2017 07:11 AM, Krzysztof Kozlowski wrote: > The CONFIG prefix from defines in the s3c2410_wdt.c might suggest that > these constants come from Kconfig. > > Signed-off-by: Krzysztof Kozlowski Reviewed-by: Guenter Roeck > --- > drivers/watchdog/s3c2410_wdt.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c > index 59e95762a6de..3e216f54cb6f 100644 > --- a/drivers/watchdog/s3c2410_wdt.c > +++ b/drivers/watchdog/s3c2410_wdt.c > @@ -64,8 +64,8 @@ > #define S3C2410_WTCON_PRESCALE_MASK (0xff << 8) > #define S3C2410_WTCON_PRESCALE_MAX 0xff > > -#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0) > -#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15) > +#define S3C2410_WATCHDOG_ATBOOT (0) > +#define S3C2410_WATCHDOG_DEFAULT_TIME (15) > > #define EXYNOS5_RST_STAT_REG_OFFSET 0x0404 > #define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408 > @@ -79,7 +79,7 @@ > > static bool nowayout = WATCHDOG_NOWAYOUT; > static int tmr_margin; > -static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT; > +static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT; > static int soft_noboot; > static int debug; > > @@ -90,10 +90,10 @@ module_param(soft_noboot, int, 0); > module_param(debug, int, 0); > > MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default=" > - __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")"); > + __MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")"); > MODULE_PARM_DESC(tmr_atboot, > "Watchdog is started at boot time if set to 1, default=" > - __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT)); > + __MODULE_STRING(S3C2410_WATCHDOG_ATBOOT)); > MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" > __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, " > @@ -406,7 +406,7 @@ static struct watchdog_ops s3c2410wdt_ops = { > static struct watchdog_device s3c2410_wdd = { > .info = &s3c2410_wdt_ident, > .ops = &s3c2410wdt_ops, > - .timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME, > + .timeout = S3C2410_WATCHDOG_DEFAULT_TIME, > }; > > /* interrupt handler code */ > @@ -600,12 +600,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev) > wdt->wdt_device.timeout); > if (ret) { > started = s3c2410wdt_set_heartbeat(&wdt->wdt_device, > - CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); > + S3C2410_WATCHDOG_DEFAULT_TIME); > > if (started == 0) > dev_info(dev, > "tmr_margin value out of range, default %d used\n", > - CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME); > + S3C2410_WATCHDOG_DEFAULT_TIME); > else > dev_info(dev, "default timer value is out of range, " > "cannot start\n"); >