From: eric.auger@redhat.com (Auger Eric)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 22/22] KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES
Date: Thu, 4 May 2017 00:22:45 +0200 [thread overview]
Message-ID: <a236dc61-2454-835d-985e-db154661042c@redhat.com> (raw)
In-Reply-To: <20170430213219.GE1499@lvm>
Hi Christoffer,
On 30/04/2017 23:32, Christoffer Dall wrote:
> On Fri, Apr 14, 2017 at 12:15:34PM +0200, Eric Auger wrote:
>> This patch adds a new attribute to GICV3 KVM device
>> KVM_DEV_ARM_VGIC_GRP_CTRL group. This Allows the userspace to
>
> nit: allows (lowercase)
> nit: s/the userspace/userspace/
>
>> flush all GICR pending tables into guest RAM. At the moment
>> we do not offer any restore control as the sync is implicit.
>
> I would probably remove the last sentence here.
>
>>
>> As we need the PENDBASER_ADDRESS() in vgic-v3, let's move its
>> definition in the irqchip header. We restore the full length
>> of the field, ie [51:16]. Same for PROPBASER_ADDRESS with full
>> field length of [51:12].
>>
>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>>
>> ---
>> v4 -> v5:
>> - move pending table save code/ctrl into VGICv3 instead of ITS
>> - remove useless gpa_t cast
>> - use the same optimization as in its_sync_lpi_pending_table
>>
>> v3 -> v4:
>> - remove the wrong comment about locking
>> - pass kvm struct instead of its handle
>> - add comment about restore method
>> - remove GITR_PENDABASER.PTZ check
>> - continue if target_vcpu == NULL
>> - new locking strategy
>>
>> v1 -> v2:
>> - do not care about the 1st KB which should be zeroed according to
>> the spec.
>> ---
>> arch/arm/include/uapi/asm/kvm.h | 1 +
>> arch/arm64/include/uapi/asm/kvm.h | 1 +
>> include/linux/irqchip/arm-gic-v3.h | 2 ++
>> virt/kvm/arm/vgic/vgic-its.c | 6 ++---
>> virt/kvm/arm/vgic/vgic-kvm-device.c | 20 ++++++++++++++
>> virt/kvm/arm/vgic/vgic-v3.c | 54 +++++++++++++++++++++++++++++++++++++
>> virt/kvm/arm/vgic/vgic.h | 1 +
>> 7 files changed, 81 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h
>> index 8e6563c..78fe803 100644
>> --- a/arch/arm/include/uapi/asm/kvm.h
>> +++ b/arch/arm/include/uapi/asm/kvm.h
>> @@ -202,6 +202,7 @@ struct kvm_arch_memory_slot {
>> #define KVM_DEV_ARM_VGIC_CTRL_INIT 0
>> #define KVM_DEV_ARM_ITS_SAVE_TABLES 1
>> #define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
>> +#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3
>>
>> /* KVM_IRQ_LINE irq field index values */
>> #define KVM_ARM_IRQ_TYPE_SHIFT 24
>> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
>> index 1e35115..8a3758a 100644
>> --- a/arch/arm64/include/uapi/asm/kvm.h
>> +++ b/arch/arm64/include/uapi/asm/kvm.h
>> @@ -222,6 +222,7 @@ struct kvm_arch_memory_slot {
>> #define KVM_DEV_ARM_VGIC_CTRL_INIT 0
>> #define KVM_DEV_ARM_ITS_SAVE_TABLES 1
>> #define KVM_DEV_ARM_ITS_RESTORE_TABLES 2
>> +#define KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES 3
>>
>> /* Device Control API on vcpu fd */
>> #define KVM_ARM_VCPU_PMU_V3_CTRL 0
>> diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
>> index 0c6798c..9d3932f 100644
>> --- a/include/linux/irqchip/arm-gic-v3.h
>> +++ b/include/linux/irqchip/arm-gic-v3.h
>> @@ -158,6 +158,7 @@
>> #define GICR_PROPBASER_RaWaWb GIC_BASER_CACHEABILITY(GICR_PROPBASER, INNER, RaWaWb)
>>
>> #define GICR_PROPBASER_IDBITS_MASK (0x1f)
>> +#define GICR_PROPBASER_ADDRESS(x) ((x) & GENMASK_ULL(51, 12))
>>
>> #define GICR_PENDBASER_SHAREABILITY_SHIFT (10)
>> #define GICR_PENDBASER_INNER_CACHEABILITY_SHIFT (7)
>> @@ -183,6 +184,7 @@
>> #define GICR_PENDBASER_RaWaWb GIC_BASER_CACHEABILITY(GICR_PENDBASER, INNER, RaWaWb)
>>
>> #define GICR_PENDBASER_PTZ BIT_ULL(62)
>> +#define GICR_PENDBASER_ADDRESS(x) ((x) & GENMASK_ULL(51, 16))
>>
>> /*
>> * Re-Distributor registers, offsets from SGI_base
>> diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
>> index be848be..745c245 100644
>> --- a/virt/kvm/arm/vgic/vgic-its.c
>> +++ b/virt/kvm/arm/vgic/vgic-its.c
>> @@ -189,8 +189,6 @@ static struct its_ite *find_ite(struct vgic_its *its, u32 device_id,
>> */
>> #define BASER_ADDRESS(x) ((x) & GENMASK_ULL(47, 16))
>> #define CBASER_ADDRESS(x) ((x) & GENMASK_ULL(47, 12))
>> -#define PENDBASER_ADDRESS(x) ((x) & GENMASK_ULL(47, 16))
>> -#define PROPBASER_ADDRESS(x) ((x) & GENMASK_ULL(47, 12))
>>
>> #define GIC_LPI_OFFSET 8192
>>
>> @@ -227,7 +225,7 @@ static struct its_collection *find_collection(struct vgic_its *its, int coll_id)
>> static int update_lpi_config(struct kvm *kvm, struct vgic_irq *irq,
>> struct kvm_vcpu *filter_vcpu)
>> {
>> - u64 propbase = PROPBASER_ADDRESS(kvm->arch.vgic.propbaser);
>> + u64 propbase = GICR_PROPBASER_ADDRESS(kvm->arch.vgic.propbaser);
>> u8 prop;
>> int ret;
>>
>> @@ -339,7 +337,7 @@ static u32 max_lpis_propbaser(u64 propbaser)
>> */
>> static int its_sync_lpi_pending_table(struct kvm_vcpu *vcpu)
>> {
>> - gpa_t pendbase = PENDBASER_ADDRESS(vcpu->arch.vgic_cpu.pendbaser);
>> + gpa_t pendbase = GICR_PENDBASER_ADDRESS(vcpu->arch.vgic_cpu.pendbaser);
>> struct vgic_irq *irq;
>> int last_byte_offset = -1;
>> int ret = 0;
>> diff --git a/virt/kvm/arm/vgic/vgic-kvm-device.c b/virt/kvm/arm/vgic/vgic-kvm-device.c
>> index 859bfa8..d48743c 100644
>> --- a/virt/kvm/arm/vgic/vgic-kvm-device.c
>> +++ b/virt/kvm/arm/vgic/vgic-kvm-device.c
>> @@ -580,6 +580,24 @@ static int vgic_v3_set_attr(struct kvm_device *dev,
>> reg = tmp32;
>> return vgic_v3_attr_regs_access(dev, attr, ®, true);
>> }
>> + case KVM_DEV_ARM_VGIC_GRP_CTRL: {
>> + int ret;
>> +
>> + switch (attr->attr) {
>> + case KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES:
>> + mutex_lock(&dev->kvm->lock);
>> +
>> + if (!lock_all_vcpus(dev->kvm)) {
>> + mutex_unlock(&dev->kvm->lock);
>> + return -EBUSY;
>> + }
>> + ret = vgic_v3_save_pending_tables(dev->kvm);
>> + unlock_all_vcpus(dev->kvm);
>> + mutex_unlock(&dev->kvm->lock);
>> + return ret;
>> + }
>> + break;
>> + }
>> }
>> return -ENXIO;
>> }
>> @@ -658,6 +676,8 @@ static int vgic_v3_has_attr(struct kvm_device *dev,
>> switch (attr->attr) {
>> case KVM_DEV_ARM_VGIC_CTRL_INIT:
>> return 0;
>> + case KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES:
>> + return 0;
>> }
>> }
>> return -ENXIO;
>> diff --git a/virt/kvm/arm/vgic/vgic-v3.c b/virt/kvm/arm/vgic/vgic-v3.c
>> index be0f4c3..1f0977f 100644
>> --- a/virt/kvm/arm/vgic/vgic-v3.c
>> +++ b/virt/kvm/arm/vgic/vgic-v3.c
>> @@ -15,6 +15,7 @@
>> #include <linux/irqchip/arm-gic-v3.h>
>> #include <linux/kvm.h>
>> #include <linux/kvm_host.h>
>> +//#include <linux/bitops.h>
>> #include <kvm/arm_vgic.h>
>> #include <asm/kvm_mmu.h>
>> #include <asm/kvm_asm.h>
>> @@ -252,6 +253,59 @@ void vgic_v3_enable(struct kvm_vcpu *vcpu)
>> vgic_v3->vgic_hcr = ICH_HCR_EN;
>> }
>>
>> +/**
>> + * vgic_its_save_pending_tables - Save the pending tables into guest RAM
>> + * kvm lock and all vcpu lock must be held
>> + */
>> +int vgic_v3_save_pending_tables(struct kvm *kvm)
>> +{
>> + struct vgic_dist *dist = &kvm->arch.vgic;
>> + int last_byte_offset = -1;
>> + struct vgic_irq *irq;
>> + int ret;
>> +
>> + list_for_each_entry(irq, &dist->lpi_list_head, lpi_list) {
>> + int byte_offset, bit_nr;
>> + struct kvm_vcpu *vcpu;
>> + gpa_t pendbase, ptr;
>> + bool stored;
>> + u8 val;
>> +
>> + vcpu = irq->target_vcpu;
>> + if (!vcpu)
>> + continue;
>> +
>> + pendbase = GICR_PENDBASER_ADDRESS(vcpu->arch.vgic_cpu.pendbaser);
>> +
>> + byte_offset = irq->intid / BITS_PER_BYTE;
>> + bit_nr = irq->intid % BITS_PER_BYTE;
>> + ptr = pendbase + byte_offset;
>> +
>> + if (byte_offset != last_byte_offset) {
>> + ret = kvm_read_guest(kvm, ptr, &val, 1);
>> + if (ret)
>> + return ret;
>> + last_byte_offset = byte_offset;
>> + }
>> +
>> + stored = val & bit_nr;
>
> didn't you mean 'stored = val & (1 << bit_nr)' ?
yes thanks!
>
>> + if (stored == irq->pending_latch)
>> + continue;
>> +
>> + if (irq->pending_latch)
>> + val |= 1 << bit_nr;
>> + else
>> + val &= ~(1 << bit_nr);
>> +
>> + ret = kvm_write_guest(kvm, ptr, &val, 1);
>> + if (ret)
>> + return ret;
>> + }
>
> This loop could probably be written a bit more efficiently and
> simplicity by reading the memory one word at a time (and remembering to
> do le64_to_cpu) and then doing something like:
>
> if (irq->pending_latch)
> old = __test_and_set_bit(bit_nr, &val);
> else
> old = __test_and_clear_bit(bit_nr, &val);
>
> if (old != val) {
> tmp = cpu_to_le64(val);
> ret = kvm_write_guest(kvm, ptr, &tmp,
> sizeof(unsigned long));
> if (ret)
> retur ret;
> }
>
> Further, you could also detect when the word_offset changes and write
> back the entire word with all its changes then, but you'd also have to
> check at the end of the loop then. Not sure that's worth the
> optimization or easier to read than what you heave. It's up to you.
I eventually chose to leave the code as it is today. One of the
rationale is it is pretty similar to the its_sync_lpi_pending_table
function in vgic-its.c.
Thanks
Eric
>
> Thanks,
> -Christoffer
>
>> +
>> + return 0;
>> +}
>> +
>> +
>> /* check for overlapping regions and for regions crossing the end of memory */
>> static bool vgic_v3_check_base(struct kvm *kvm)
>> {
>> diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
>> index 9bc52ef..535c2fc 100644
>> --- a/virt/kvm/arm/vgic/vgic.h
>> +++ b/virt/kvm/arm/vgic/vgic.h
>> @@ -177,6 +177,7 @@ void vgic_v3_get_vmcr(struct kvm_vcpu *vcpu, struct vgic_vmcr *vmcr);
>> void vgic_v3_enable(struct kvm_vcpu *vcpu);
>> int vgic_v3_probe(const struct gic_kvm_info *info);
>> int vgic_v3_map_resources(struct kvm *kvm);
>> +int vgic_v3_save_pending_tables(struct kvm *kvm);
>> int vgic_register_redist_iodevs(struct kvm *kvm, gpa_t dist_base_address);
>>
>> int vgic_register_its_iodevs(struct kvm *kvm);
>> --
>> 2.5.5
>>
next prev parent reply other threads:[~2017-05-03 22:22 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-14 10:15 [PATCH v5 00/22] vITS save/restore Eric Auger
2017-04-14 10:15 ` [PATCH v5 01/22] KVM: arm/arm64: Add ITS save/restore API documentation Eric Auger
2017-04-25 10:38 ` Peter Maydell
2017-04-26 12:31 ` Christoffer Dall
2017-04-26 15:48 ` Auger Eric
2017-04-27 8:57 ` Christoffer Dall
2017-04-27 9:33 ` Auger Eric
2017-04-27 11:02 ` Christoffer Dall
2017-04-27 12:51 ` Auger Eric
2017-04-27 14:45 ` Christoffer Dall
2017-04-27 15:29 ` Auger Eric
2017-04-27 16:23 ` Marc Zyngier
2017-04-27 17:14 ` Auger Eric
2017-04-27 17:27 ` Christoffer Dall
2017-04-27 16:38 ` Christoffer Dall
2017-04-27 17:27 ` Auger Eric
2017-04-27 17:54 ` Christoffer Dall
2017-04-27 19:27 ` Auger Eric
2017-05-04 7:00 ` Auger Eric
2017-05-04 7:40 ` Marc Zyngier
2017-05-04 7:54 ` Auger Eric
2017-05-04 7:46 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 02/22] KVM: arm/arm64: Add GICV3 pending table save " Eric Auger
2017-04-25 10:43 ` Peter Maydell
2017-04-26 8:26 ` Auger Eric
2017-04-26 8:44 ` Peter Maydell
2017-04-26 8:48 ` Dr. David Alan Gilbert
2017-04-26 9:57 ` Auger Eric
2017-04-26 13:00 ` Christoffer Dall
2017-04-26 13:01 ` Peter Maydell
2017-04-26 13:14 ` Christoffer Dall
2017-04-26 13:26 ` Peter Maydell
2017-04-26 14:47 ` Auger Eric
2017-04-14 10:15 ` [PATCH v5 03/22] KVM: arm/arm64: vgic-its: rename itte into ite Eric Auger
2017-04-26 11:21 ` Prakash B
2017-04-27 9:05 ` Christoffer Dall
2017-04-27 9:20 ` Andre Przywara
2017-04-27 9:40 ` Auger Eric
2017-04-27 11:09 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 04/22] arm/arm64: vgic: turn vgic_find_mmio_region into public Eric Auger
2017-04-26 11:22 ` Prakash B
2017-04-27 9:07 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 05/22] KVM: arm64: vgic-its: KVM_DEV_ARM_VGIC_GRP_ITS_REGS group Eric Auger
2017-04-26 11:23 ` Prakash B
2017-04-27 9:12 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 06/22] KVM: arm/arm64: vgic: expose (un)lock_all_vcpus Eric Auger
2017-04-26 11:23 ` Prakash B
2017-04-27 9:18 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 07/22] KVM: arm64: vgic-its: Implement vgic_its_has_attr_regs and attr_regs_access Eric Auger
2017-04-26 11:24 ` Prakash B
2017-04-27 11:00 ` Christoffer Dall
2017-04-27 12:22 ` Auger Eric
2017-04-14 10:15 ` [PATCH v5 08/22] KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_creadr Eric Auger
2017-04-26 11:24 ` Prakash B
2017-04-27 11:27 ` Christoffer Dall
2017-04-27 12:53 ` Auger Eric
2017-04-14 10:15 ` [PATCH v5 09/22] KVM: arm64: vgic-its: Introduce migration ABI infrastructure Eric Auger
2017-04-26 11:27 ` Prakash B
2017-04-27 13:14 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 10/22] KVM: arm64: vgic-its: Implement vgic_mmio_uaccess_write_its_iidr Eric Auger
2017-04-26 11:27 ` Prakash B
2017-04-27 14:57 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 11/22] KVM: arm64: vgic-its: Interpret MAPD Size field and check related errors Eric Auger
2017-04-26 11:28 ` Prakash B
2017-04-27 16:25 ` Christoffer Dall
2017-04-27 17:15 ` Auger Eric
2017-04-27 17:28 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 12/22] KVM: arm64: vgic-its: Interpret MAPD ITT_addr field Eric Auger
2017-04-26 11:29 ` Prakash B
2017-04-27 16:43 ` Christoffer Dall
2017-04-27 17:44 ` Auger Eric
2017-04-27 18:09 ` Christoffer Dall
2017-04-27 19:18 ` Auger Eric
2017-04-14 10:15 ` [PATCH v5 13/22] KVM: arm64: vgic-its: Check the device id matches TYPER DEVBITS range Eric Auger
2017-04-26 11:29 ` Prakash B
2017-04-27 16:48 ` Christoffer Dall
2017-04-27 17:24 ` Auger Eric
2017-04-14 10:15 ` [PATCH v5 14/22] KVM: arm64: vgic-its: KVM_DEV_ARM_ITS_SAVE/RESTORE_TABLES Eric Auger
2017-04-26 11:31 ` Prakash B
2017-04-27 17:24 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 15/22] KVM: arm64: vgic-its: vgic_its_alloc_ite/device Eric Auger
2017-04-26 11:31 ` Prakash B
2017-04-27 17:31 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 16/22] KVM: arm64: vgic-its: Add infrastructure for table lookup Eric Auger
2017-04-26 11:32 ` Prakash B
2017-04-27 18:06 ` Christoffer Dall
2017-04-27 19:24 ` Auger Eric
2017-04-28 9:47 ` Christoffer Dall
2017-04-30 19:33 ` Christoffer Dall
2017-05-03 13:40 ` Auger Eric
2017-05-03 14:38 ` Christoffer Dall
2017-04-30 19:35 ` Christoffer Dall
2017-05-03 6:53 ` Auger Eric
2017-05-03 8:01 ` Christoffer Dall
2017-05-03 10:22 ` Auger Eric
2017-04-30 20:13 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 17/22] KVM: arm64: vgic-its: Collection table save/restore Eric Auger
2017-04-26 11:33 ` Prakash B
2017-04-28 10:44 ` Christoffer Dall
2017-04-28 11:05 ` Auger Eric
2017-04-28 17:42 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 18/22] KVM: arm64: vgic-its: vgic_its_check_id returns the entry's GPA Eric Auger
2017-04-26 11:33 ` Prakash B
2017-05-02 8:29 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 19/22] KVM: arm64: vgic-its: ITT save and restore Eric Auger
2017-04-26 11:34 ` Prakash B
2017-04-30 20:14 ` Christoffer Dall
2017-05-03 16:08 ` Auger Eric
2017-05-03 16:37 ` Christoffer Dall
2017-05-03 21:55 ` Auger Eric
2017-05-04 7:31 ` Christoffer Dall
2017-05-04 7:40 ` Auger Eric
2017-05-04 8:23 ` Christoffer Dall
2017-05-04 8:44 ` Auger Eric
2017-04-14 10:15 ` [PATCH v5 20/22] KVM: arm64: vgic-its: Device table save/restore Eric Auger
2017-04-26 11:34 ` Prakash B
2017-04-30 20:55 ` Christoffer Dall
2017-05-03 14:07 ` Auger Eric
2017-05-03 15:29 ` Christoffer Dall
2017-05-03 21:38 ` Auger Eric
2017-04-14 10:15 ` [PATCH v5 21/22] KVM: arm64: vgic-its: Fix pending table sync Eric Auger
2017-04-26 11:35 ` Prakash B
2017-04-30 21:10 ` Christoffer Dall
2017-05-03 22:20 ` Auger Eric
2017-05-04 7:32 ` Christoffer Dall
2017-04-14 10:15 ` [PATCH v5 22/22] KVM: arm64: vgic-v3: KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES Eric Auger
2017-04-26 11:35 ` Prakash B
2017-04-30 21:32 ` Christoffer Dall
2017-05-03 22:22 ` Auger Eric [this message]
2017-04-26 11:38 ` [PATCH v5 00/22] vITS save/restore Prakash B
2017-04-26 13:02 ` Christoffer Dall
2017-04-27 6:55 ` Auger Eric
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a236dc61-2454-835d-985e-db154661042c@redhat.com \
--to=eric.auger@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).