[PATCH v3 0/4] thermal: add brcmstb AVS TMON driver

[f.fainelli@gmail.com (Florian Fainelli)]

On 07/31/2017 12:26 PM, Markus Mayer wrote:
> From: Markus Mayer <mmayer@broadcom.com>
> 
> This series adds the brcmstb AVS TMON driver.
> 
> The driver was originally written by Brian Norris.
> 
> v1 of this series can be found at https://lkml.org/lkml/2017/6/5/921
> v2 of this series can be found at https://lkml.org/lkml/2017/7/21/585

FWIW, this looks good to me, Eduardo, Rui, can we get this moving?

> 
> Changes since v2:
> - replaced calls to pr_debug() with calls to dev_dbg() [PATCH 2/4 only]
> - all other patches are unchanged from v2
> 
> Changes since v1:
> - Fixed wording in binding document
> - Fixed lincensing to consistently mention GPL v2
> - Use thermal_zone_get_slope() and thermal_zone_get_offset()
> - Some minor clean-ups
> 
> Brian Norris (2):
>   Documentation: devicetree: add binding for Broadcom STB AVS TMON
>   thermal: add brcmstb AVS TMON driver
> 
> Markus Mayer (2):
>   ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
>   arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
> 
>  .../devicetree/bindings/thermal/brcm,avs-tmon.txt  |  20 ++
>  MAINTAINERS                                        |   8 +
>  arch/arm/configs/multi_v7_defconfig                |   1 +
>  arch/arm64/configs/defconfig                       |   1 +
>  drivers/thermal/Kconfig                            |   2 +-
>  drivers/thermal/broadcom/Kconfig                   |   7 +
>  drivers/thermal/broadcom/Makefile                  |   1 +
>  drivers/thermal/broadcom/brcmstb_thermal.c         | 386 +++++++++++++++++++++
>  8 files changed, 425 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt
>  create mode 100644 drivers/thermal/broadcom/brcmstb_thermal.c
> 


-- 
Florian