Re: [PATCH v3 05/12] PCI: brcmstb: Use swinit reset if available

[Stanimir Varbanov <svarbanov@suse.de>]

On 7/11/24 01:16, Jim Quinlan wrote:
> The 7712 SOC adds a software init reset device for the PCIe HW.
> If found in the DT node, use it.
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index 92816d8d215a..4dc2ff7f3167 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -266,6 +266,7 @@ struct brcm_pcie {
>  	struct reset_control	*rescal;
>  	struct reset_control	*perst_reset;
>  	struct reset_control	*bridge;
> +	struct reset_control	*swinit;
>  	int			num_memc;
>  	u64			memc_size[PCIE_BRCM_MAX_MEMC];
>  	u32			hw_rev;
> @@ -1633,12 +1634,27 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>  	if (IS_ERR(pcie->bridge))
>  		return PTR_ERR(pcie->bridge);
>  
> +	pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
> +	if (IS_ERR(pcie->swinit))
> +		return PTR_ERR(pcie->swinit);
> +
>  	ret = clk_prepare_enable(pcie->clk);
>  	if (ret) {
>  		dev_err(&pdev->dev, "could not enable clock\n");
>  		return ret;
>  	}
>  
> +	ret = reset_control_assert(pcie->swinit);
> +	if (ret) {
> +		dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n");
> +		goto clk_out;
> +	}

If there is a new version, please add blank line here.

Otherwise:

Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>

~Stan

> +	ret = reset_control_deassert(pcie->swinit);
> +	if (ret) {
> +		dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n");
> +		goto clk_out;
> +	}
> +
>  	ret = reset_control_reset(pcie->rescal);
>  	if (ret) {
>  		dev_err(&pdev->dev, "failed to deassert 'rescal'\n");