From mboxrd@z Thu Jan 1 00:00:00 1970 From: vladimir_zapolskiy@mentor.com (Vladimir Zapolskiy) Date: Thu, 31 May 2018 11:33:43 +0300 Subject: [PATCH v4 5/5] ARM: dts: imx6qdl: add missing compatible and clock properties for EPIT In-Reply-To: <20180530120327.27681-6-peron.clem@gmail.com> References: <20180530120327.27681-1-peron.clem@gmail.com> <20180530120327.27681-6-peron.clem@gmail.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 05/30/2018 03:03 PM, Cl?ment P?ron wrote: > From: Colin Didier > > Add missing compatible and clock properties for EPIT node. > > Signed-off-by: Colin Didier > Signed-off-by: Cl?ment Peron > Reviewed-by: Fabio Estevam > --- > arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi > index c003e62bf290..0feec516847a 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -844,13 +844,23 @@ > }; > > epit1: epit at 20d0000 { /* EPIT1 */ epit1: timer at 20d0000 { ... And /* EPIT1 */ comment can be removed, it is quite clear from the same line context. Formally it is a subject to another patch, but I think this can be accepted as a part of this one. > + compatible = "fsl,imx6q-epit", "fsl,imx31-epit"; > reg = <0x020d0000 0x4000>; > interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6QDL_CLK_IPG_PER>, > + <&clks IMX6QDL_CLK_EPIT1>; > + clock-names = "ipg", "per"; > + status = "disabled"; > }; > > epit2: epit at 20d4000 { /* EPIT2 */ Same as above. > + compatible = "fsl,imx6q-epit", "fsl,imx31-epit"; > reg = <0x020d4000 0x4000>; > interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clks IMX6QDL_CLK_IPG_PER>, > + <&clks IMX6QDL_CLK_EPIT2>; > + clock-names = "ipg", "per"; > + status = "disabled"; > }; > > src: src at 20d8000 { > -- With best wishes, Vladimir