[PATCH v2 0/3] davinci: ohci: fix usb ohci device name

[PATCH v2 0/3] davinci: ohci: fix usb ohci device name

[Axel Haslam]

The usb ohci clock match is not working because the usb clock
is registered as "ohci" instead of "ohci.0"

But since there is only a single ohci instance, lets pass -1 to
the platform data id parameter and avoid the extra ".0" matching.

while we are fixing this, rename the driver from "ohci" to
"ohci-da8xx" which  is less generic and consistent with other
usb drivers.

changes form v1 -> v2
*Reword commit messages (David Lechner)

Because of the recently accepted patches on the ARM-davinci side,
This patch series is based on:
branch: /v4.10/soc of the linux-davinci tree.

It Depends on two accepted usb patches missing on that branch:
6c21caa USB: OHCI: make ohci-da8xx a separate driver (in next-usb)
6110c42 usb: ohci-da8xx: Remove code that references mach (in linux-next)

A branch with both patches applied + this series can be found here:
https://github.com/axelhaslamx/linux-axel/commits/ti-davinci-ohci-rename


Axel Haslam (3):
  ARM: davinci: da8xx: Fix ohci device name
  phy: da8xx-usb: rename the ohci device to ohci-da8xx
  usb: ohci-da8xx: rename driver to ohci-da8xx

 arch/arm/mach-davinci/da830.c     | 2 +-
 arch/arm/mach-davinci/da850.c     | 2 +-
 arch/arm/mach-davinci/da8xx-dt.c  | 2 +-
 arch/arm/mach-davinci/usb-da8xx.c | 4 ++--
 drivers/phy/phy-da8xx-usb.c       | 5 +++--
 drivers/usb/host/ohci-da8xx.c     | 2 +-
 6 files changed, 9 insertions(+), 8 deletions(-)

-- 
2.10.1

[PATCH v2 1/3] ARM: davinci: da8xx: Fix ohci device name

[Axel Haslam]

While the clk lookup table is making reference to "ohci"
other subsystems (such as phy) are trying to match "ohci.0"

Since there is a single ohci instance, instead of changing
the clk name, change the dev id to -1, and add the "-da8xx"
postfix to match the driver name that will also be changed
in a subsequent patch.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 arch/arm/mach-davinci/da830.c     | 2 +-
 arch/arm/mach-davinci/da850.c     | 2 +-
 arch/arm/mach-davinci/da8xx-dt.c  | 2 +-
 arch/arm/mach-davinci/usb-da8xx.c | 4 ++--
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 41459bd..073c458 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -420,7 +420,7 @@ static struct clk_lookup da830_clks[] = {
 	CLK("davinci_mdio.0",   "fck",          &emac_clk),
 	CLK(NULL,		"gpio",		&gpio_clk),
 	CLK("i2c_davinci.2",	NULL,		&i2c1_clk),
-	CLK("ohci",		"usb11",	&usb11_clk),
+	CLK("ohci-da8xx",	"usb11",	&usb11_clk),
 	CLK(NULL,		"emif3",	&emif3_clk),
 	CLK(NULL,		"arm",		&arm_clk),
 	CLK(NULL,		"rmii",		&rmii_clk),
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 196e262..3961556 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -503,7 +503,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK("da830-mmc.1",	NULL,		&mmcsd1_clk),
 	CLK("ti-aemif",		NULL,		&aemif_clk),
 	CLK(NULL,		"aemif",	&aemif_clk),
-	CLK("ohci",		"usb11",	&usb11_clk),
+	CLK("ohci-da8xx",	"usb11",	&usb11_clk),
 	CLK("musb-da8xx",	"usb20",	&usb20_clk),
 	CLK("spi_davinci.0",	NULL,		&spi0_clk),
 	CLK("spi_davinci.1",	NULL,		&spi1_clk),
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 92ae093..2afb067 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -39,7 +39,7 @@ static struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("ti,da830-mcasp-audio", 0x01d00000, "davinci-mcasp.0", NULL),
 	OF_DEV_AUXDATA("ti,da850-aemif", 0x68000000, "ti-aemif", NULL),
 	OF_DEV_AUXDATA("ti,da850-tilcdc", 0x01e13000, "da8xx_lcdc.0", NULL),
-	OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci", NULL),
+	OF_DEV_AUXDATA("ti,da830-ohci", 0x01e25000, "ohci-da8xx", NULL),
 	OF_DEV_AUXDATA("ti,da830-musb", 0x01e00000, "musb-da8xx", NULL),
 	OF_DEV_AUXDATA("ti,da830-usb-phy", 0x01c1417c, "da8xx-usb-phy", NULL),
 	{}
diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c
index b010e5f..c6feecf 100644
--- a/arch/arm/mach-davinci/usb-da8xx.c
+++ b/arch/arm/mach-davinci/usb-da8xx.c
@@ -109,8 +109,8 @@ static struct resource da8xx_usb11_resources[] = {
 static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
 
 static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci",
-	.id		= 0,
+	.name		= "ohci-da8xx",
+	.id		= -1,
 	.dev = {
 		.dma_mask		= &da8xx_usb11_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
-- 
2.10.1

[PATCH v2 1/3] ARM: davinci: da8xx: Fix ohci device name

[Sekhar Nori]

On Thursday 03 November 2016 09:33 PM, Axel Haslam wrote:
> While the clk lookup table is making reference to "ohci"
> other subsystems (such as phy) are trying to match "ohci.0"
> 
> Since there is a single ohci instance, instead of changing
> the clk name, change the dev id to -1, and add the "-da8xx"
> postfix to match the driver name that will also be changed
> in a subsequent patch.
> 
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>

Applied to v4.10/soc

Thanks,
Sekhar

[PATCH v2 2/3] phy: da8xx-usb: rename the ohci device to ohci-da8xx

[Axel Haslam]

The ohci device name has changed in the board configuraion files,
hence, change the phy lookup table to match the new name.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/phy/phy-da8xx-usb.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
index 32ae78c..c85fb0b 100644
--- a/drivers/phy/phy-da8xx-usb.c
+++ b/drivers/phy/phy-da8xx-usb.c
@@ -198,7 +198,8 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 	} else {
 		int ret;
 
-		ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+		ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy",
+					"ohci-da8xx");
 		if (ret)
 			dev_warn(dev, "Failed to create usb11 phy lookup\n");
 		ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy",
@@ -216,7 +217,7 @@ static int da8xx_usb_phy_remove(struct platform_device *pdev)
 
 	if (!pdev->dev.of_node) {
 		phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx");
-		phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
+		phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci-da8xx");
 	}
 
 	return 0;
-- 
2.10.1

[PATCH v2 2/3] phy: da8xx-usb: rename the ohci device to ohci-da8xx

[Kishon Vijay Abraham I]

On Thursday 03 November 2016 09:33 PM, Axel Haslam wrote:
> The ohci device name has changed in the board configuraion files,
> hence, change the phy lookup table to match the new name.
> 
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>

merged, thanks.

-Kishon
> ---
>  drivers/phy/phy-da8xx-usb.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
> index 32ae78c..c85fb0b 100644
> --- a/drivers/phy/phy-da8xx-usb.c
> +++ b/drivers/phy/phy-da8xx-usb.c
> @@ -198,7 +198,8 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
>  	} else {
>  		int ret;
>  
> -		ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
> +		ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy",
> +					"ohci-da8xx");
>  		if (ret)
>  			dev_warn(dev, "Failed to create usb11 phy lookup\n");
>  		ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy",
> @@ -216,7 +217,7 @@ static int da8xx_usb_phy_remove(struct platform_device *pdev)
>  
>  	if (!pdev->dev.of_node) {
>  		phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx");
> -		phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0");
> +		phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci-da8xx");
>  	}
>  
>  	return 0;
> 

[PATCH v2 3/3] usb: ohci-da8xx: rename driver to ohci-da8xx

[Axel Haslam]

The davinci ohci driver name (currently "ohci") is too generic.
To be consistent with other usb dirvers, append the "-da8xx" postfix
to the name.

Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
---
 drivers/usb/host/ohci-da8xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 30c4878..429d58b 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -27,7 +27,7 @@
 #include "ohci.h"
 
 #define DRIVER_DESC "DA8XX"
-#define DRV_NAME "ohci"
+#define DRV_NAME "ohci-da8xx"
 
 static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
 
-- 
2.10.1

[PATCH v2 3/3] usb: ohci-da8xx: rename driver to ohci-da8xx

[Axel Haslam]

Hi Greg,

On Thu, Nov 3, 2016 at 5:03 PM, Axel Haslam <ahaslam@baylibre.com> wrote:
> The davinci ohci driver name (currently "ohci") is too generic.
> To be consistent with other usb dirvers, append the "-da8xx" postfix
> to the name.
>

if there are no objections, would it be possible to pick up this patch?
the corresponding phy patch was merged and the platform changes
are ack'ed, and will we taken by the davinci maintainer once this patch
gets in.

i can resend stand-alone if its preferred.

Regards
Axel

> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
> ---
>  drivers/usb/host/ohci-da8xx.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
> index 30c4878..429d58b 100644
> --- a/drivers/usb/host/ohci-da8xx.c
> +++ b/drivers/usb/host/ohci-da8xx.c
> @@ -27,7 +27,7 @@
>  #include "ohci.h"
>
>  #define DRIVER_DESC "DA8XX"
> -#define DRV_NAME "ohci"
> +#define DRV_NAME "ohci-da8xx"
>
>  static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
>
> --
> 2.10.1
>

[PATCH v2 3/3] usb: ohci-da8xx: rename driver to ohci-da8xx

[Greg KH]

On Mon, Nov 21, 2016 at 06:10:50PM +0100, Axel Haslam wrote:
> Hi Greg,
> 
> On Thu, Nov 3, 2016 at 5:03 PM, Axel Haslam <ahaslam@baylibre.com> wrote:
> > The davinci ohci driver name (currently "ohci") is too generic.
> > To be consistent with other usb dirvers, append the "-da8xx" postfix
> > to the name.
> >
> 
> if there are no objections, would it be possible to pick up this patch?
> the corresponding phy patch was merged and the platform changes
> are ack'ed, and will we taken by the davinci maintainer once this patch
> gets in.

Now applied.

thanks,

greg k-h

[PATCH v2 0/3] davinci: ohci: fix usb ohci device name

[David Lechner]

On 11/03/2016 11:03 AM, Axel Haslam wrote:
> The usb ohci clock match is not working because the usb clock
> is registered as "ohci" instead of "ohci.0"
>
> But since there is only a single ohci instance, lets pass -1 to
> the platform data id parameter and avoid the extra ".0" matching.
>
> while we are fixing this, rename the driver from "ohci" to
> "ohci-da8xx" which  is less generic and consistent with other
> usb drivers.
>
> changes form v1 -> v2
> *Reword commit messages (David Lechner)
>
> Because of the recently accepted patches on the ARM-davinci side,
> This patch series is based on:
> branch: /v4.10/soc of the linux-davinci tree.
>
> It Depends on two accepted usb patches missing on that branch:
> 6c21caa USB: OHCI: make ohci-da8xx a separate driver (in next-usb)
> 6110c42 usb: ohci-da8xx: Remove code that references mach (in linux-next)
>
> A branch with both patches applied + this series can be found here:
> https://github.com/axelhaslamx/linux-axel/commits/ti-davinci-ohci-rename
>
>
> Axel Haslam (3):
>   ARM: davinci: da8xx: Fix ohci device name
>   phy: da8xx-usb: rename the ohci device to ohci-da8xx
>   usb: ohci-da8xx: rename driver to ohci-da8xx
>
>  arch/arm/mach-davinci/da830.c     | 2 +-
>  arch/arm/mach-davinci/da850.c     | 2 +-
>  arch/arm/mach-davinci/da8xx-dt.c  | 2 +-
>  arch/arm/mach-davinci/usb-da8xx.c | 4 ++--
>  drivers/phy/phy-da8xx-usb.c       | 5 +++--
>  drivers/usb/host/ohci-da8xx.c     | 2 +-
>  6 files changed, 9 insertions(+), 8 deletions(-)
>

Thanks for making the changes. The commit messages make better sense to 
me now. :-)