From mboxrd@z Thu Jan 1 00:00:00 1970 From: swetland@google.com (Brian Swetland) Date: Sun, 1 Nov 2009 15:01:19 -0800 Subject: [3/3,ARM] msm: add minimal board file for HTC Dream device In-Reply-To: <20091101221345.GA16926@elf.ucw.cz> References: <20091101221345.GA16926@elf.ucw.cz> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Nov 1, 2009 at 2:13 PM, Pavel Machek wrote: > Hi! > > On Thu 2009-06-18 00:31:15, Brian Swetland wrote: >> This is just enough to get the device booting and serial console >> working. ?Sufficient for debugging further MSM7k/Dream Support. >> This will support HTC Dream / T-Mobile G1 / Android ADP1 (which >> are all the same hardware, known as "trout" to the ARM machine >> database). >> >> Signed-off-by: Brian Swetland >> Acked-by: Pavel Machek >> Reviewed-by: GeunSik Lim > > I'm trying to get this series to work -- i.e. get dream boot up-to > serial console. > > I tried applying series on 2.6.29, and it failed compilation. > > On 2.6.30 and 2.6.32-rc, I get "Uncompressing linux..." feedback on > serial, but that's it. Do you still remember what kernel version these > should be applied to? .config would be helpful, too... Pretty sure it's something later than .29 Does enabling DEBUG_LL help? If something's dying before the serial port is registered, you might never see any console chatter. Also, I believe you'll want to pass console=ttyMSM2,115200n8 on the kernel commandline (-c parameter to fastboot or mkbootimg). Brian