From mboxrd@z Thu Jan 1 00:00:00 1970 From: swetland@google.com (Brian Swetland) Date: Sun, 1 Nov 2009 15:33:39 -0800 Subject: [3/3,ARM] msm: add minimal board file for HTC Dream device In-Reply-To: <20091101231950.GF20740@elf.ucw.cz> References: <20091101221345.GA16926@elf.ucw.cz> <20091101231950.GF20740@elf.ucw.cz> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Nov 1, 2009 at 3:19 PM, Pavel Machek wrote: >> >> Pretty sure it's something later than .29 > > I guess I should try 2.6.31. > >> Does enabling DEBUG_LL help? ?If something's dying before the serial >> port is registered, you might never see any console chatter. > > DEBUG_LL does not help. Is that early_printk() equivalent? > With DEBUG_ICEDC I don't even get "uncompressing linux" message. ICEDCC will try to send messages to JTAG DCC. Sticking a call to printascii(printk_buf) after the vscnprintf() in vprintk() in kernel/printk.c is sometimes useful alongside DEBUG_LL (so that printks will go to the serial port immediately). > Yes, I believe it dies before serial registration :-(. Being able to > call puts() that decompressor uses would be useful... > >> Also, I believe you'll want to pass console=ttyMSM2,115200n8 on the >> kernel commandline ?(-c parameter to fastboot or mkbootimg). > > I'm using "console=ttyMSM2 rootdelay=5 fbcon=rotate:1" that worked for > me on another kernel version... >