From mboxrd@z Thu Jan 1 00:00:00 1970 From: sean.wang@mediatek.com (sean.wang at mediatek.com) Date: Thu, 25 May 2017 12:02:46 +0800 Subject: [PATCH v4 8/9] arm: dts: mt7623: enable the nand device on the mt7623n nand rfb In-Reply-To: References: Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: John Crispin Enable the nand device and setup pinmux on the mt7632m rfb with nand support. Signed-off-by: John Crispin Signed-off-by: Sean Wang --- arch/arm/boot/dts/mt7623n-rfb-nand.dts | 88 ++++++++++++++++++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts index 436d51c..9356095 100644 --- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts +++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts @@ -19,3 +19,91 @@ model = "MediaTek MT7623N NAND reference board"; compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623"; }; + +&pio { + nand_pins_default: nanddefault { + pins_dat { + pinmux = , + , + , + , + , + , + , + , + ; + input-enable; + drive-strength = ; + bias-pull-up; + }; + + pins_we { + pinmux = ; + drive-strength = ; + bias-pull-up = ; + }; + + pins_ale { + pinmux = ; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&nandc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_default>; + nand at 0 { + reg = <0>; + spare_per_sector = <64>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <12>; + nand-ecc-step-size = <1024>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition at 0 { + label = "preloader"; + reg = <0x0 0x40000>; + }; + + partition at 40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + + partition at C0000 { + label = "uboot-env"; + reg = <0xC0000 0x40000>; + }; + + partition at 140000 { + label = "bootimg"; + reg = <0x140000 0x2000000>; + }; + + partition at 2140000 { + label = "recovery"; + reg = <0x2140000 0x2000000>; + }; + + partition at 4140000 { + label = "rootfs"; + reg = <0x4140000 0x1000000>; + }; + + partition at 5140000 { + label = "usrdata"; + reg = <0x5140000 0x1000000>; + }; + }; + }; +}; + +&bch { + status = "okay"; +}; -- 2.7.4