* [GIT PULL 1/4] bcm2835-dt-next-2016-11-18
@ 2016-11-18 18:58 Eric Anholt
2016-11-18 18:58 ` [GIT PULL 2/4] bcm2835-dt-64-next-2016-11-18 Eric Anholt
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Eric Anholt @ 2016-11-18 18:58 UTC (permalink / raw)
To: linux-arm-kernel
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-dt-next-2016-11-18
for you to fetch changes up to 3a1689ea752436917c5ce4487527ed6c444630ee:
ARM: bcm2835: Add names for the RPi Zero GPIO lines (2016-11-16 13:54:36 -0800)
----------------------------------------------------------------
This pull request brings in DT changes for BCM2835: pinctrl setup
cleanups, GPIO line naming, and the node for the new thermal driver.
----------------------------------------------------------------
Eric Anholt (1):
ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Gerd Hoffmann (6):
pinctrl: bcm2835: add pull defines to dt bindings
ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
ARM: dts: bcm283x: drop alt3 from &gpio
Linus Walleij (1):
ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
Martin Sperl (2):
dt: bindings: add thermal device driver for bcm2835
ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
Stefan Wahren (4):
DT: binding: bcm2835-mbox: fix address typo in example
ARM: dts: bcm283x: fix typo in mailbox address
ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines
ARM: bcm2835: Add names for the RPi Zero GPIO lines
.../bindings/mailbox/brcm,bcm2835-mbox.txt | 2 +-
.../bindings/thermal/brcm,bcm2835-thermal.txt | 17 ++
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 67 ++++++-
arch/arm/boot/dts/bcm2835-rpi-a.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 67 ++++++-
arch/arm/boot/dts/bcm2835-rpi.dtsi | 15 +-
arch/arm/boot/dts/bcm2835.dtsi | 6 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 +-
arch/arm/boot/dts/bcm2836.dtsi | 6 +
arch/arm/boot/dts/bcm283x.dtsi | 212 ++++++++++++++++++++-
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 -
include/dt-bindings/pinctrl/bcm2835.h | 5 +
15 files changed, 658 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
^ permalink raw reply [flat|nested] 8+ messages in thread* [GIT PULL 2/4] bcm2835-dt-64-next-2016-11-18
2016-11-18 18:58 [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Eric Anholt
@ 2016-11-18 18:58 ` Eric Anholt
2016-11-22 5:13 ` Florian Fainelli
2016-11-18 18:58 ` [GIT PULL 3/4] bcm2835-defconfig-next-2016-11-18 Eric Anholt
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Eric Anholt @ 2016-11-18 18:58 UTC (permalink / raw)
To: linux-arm-kernel
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-dt-64-next-2016-11-18
for you to fetch changes up to a44e87b47148c6ee6b78509f47e6a15c0fae890a:
ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED (2016-11-16 13:49:38 -0800)
----------------------------------------------------------------
This pull request brings thermal support to the BCM2837 DT, and a few
other fixes.
In order to get the thermal node that we're adjusting the compatible
string on, we have to merge in the bcm2835-dt-next branch.
----------------------------------------------------------------
Andrea Merello (1):
ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED
Andreas F?rber (1):
ARM64: dts: bcm2835: Fix bcm2837 compatible string
Eric Anholt (2):
ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.
Merge branch 'bcm2835-dt-next' into bcm2835-dt-64-next
Gerd Hoffmann (6):
pinctrl: bcm2835: add pull defines to dt bindings
ARM: dts: bcm283x: add pinctrl group to &pwm, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c0, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &i2c1, drop pins from &gpio
ARM: dts: bcm283x: add pinctrl group to &sdhci, drop pins from &gpio
ARM: dts: bcm283x: drop alt3 from &gpio
Linus Walleij (1):
ARM: bcm2835: Add names for the Raspberry Pi GPIO lines
Martin Sperl (3):
dt: bindings: add thermal device driver for bcm2835
ARM: bcm2835: dts: add thermal node to device-tree of bcm283x
ARM64: bcm2835: dts: add thermal node to device-tree of bcm2837
Stefan Wahren (3):
ARM64: dts: bcm283x: Use dtsi for USB host mode
DT: binding: bcm2835-mbox: fix address typo in example
ARM: dts: bcm283x: fix typo in mailbox address
.../bindings/mailbox/brcm,bcm2835-mbox.txt | 2 +-
.../bindings/thermal/brcm,bcm2835-thermal.txt | 17 ++
arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 67 ++++++-
arch/arm/boot/dts/bcm2835-rpi-a.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 68 ++++++-
arch/arm/boot/dts/bcm2835-rpi-b.dts | 69 ++++++-
arch/arm/boot/dts/bcm2835-rpi-zero.dts | 2 +-
arch/arm/boot/dts/bcm2835-rpi.dtsi | 15 +-
arch/arm/boot/dts/bcm2835.dtsi | 6 +
arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 2 +-
arch/arm/boot/dts/bcm2836.dtsi | 6 +
arch/arm/boot/dts/bcm283x.dtsi | 212 ++++++++++++++++++++-
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 8 +-
arch/arm64/boot/dts/broadcom/bcm2837.dtsi | 8 +-
.../boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi | 1 +
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 6 -
include/dt-bindings/pinctrl/bcm2835.h | 5 +
18 files changed, 602 insertions(+), 29 deletions(-)
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
create mode 120000 arch/arm64/boot/dts/broadcom/bcm283x-rpi-usb-host.dtsi
^ permalink raw reply [flat|nested] 8+ messages in thread* [GIT PULL 2/4] bcm2835-dt-64-next-2016-11-18
2016-11-18 18:58 ` [GIT PULL 2/4] bcm2835-dt-64-next-2016-11-18 Eric Anholt
@ 2016-11-22 5:13 ` Florian Fainelli
0 siblings, 0 replies; 8+ messages in thread
From: Florian Fainelli @ 2016-11-22 5:13 UTC (permalink / raw)
To: linux-arm-kernel
Le 18/11/2016 ? 10:58, Eric Anholt a ?crit :
> Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-dt-64-next-2016-11-18
>
> for you to fetch changes up to a44e87b47148c6ee6b78509f47e6a15c0fae890a:
>
> ARM64: dts: bcm2837-rpi-3-b: remove incorrect pwr LED (2016-11-16 13:49:38 -0800)
>
> ----------------------------------------------------------------
> This pull request brings thermal support to the BCM2837 DT, and a few
> other fixes.
>
> In order to get the thermal node that we're adjusting the compatible
> string on, we have to merge in the bcm2835-dt-next branch.
Merged, thanks!
--
Florian
^ permalink raw reply [flat|nested] 8+ messages in thread
* [GIT PULL 3/4] bcm2835-defconfig-next-2016-11-18
2016-11-18 18:58 [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Eric Anholt
2016-11-18 18:58 ` [GIT PULL 2/4] bcm2835-dt-64-next-2016-11-18 Eric Anholt
@ 2016-11-18 18:58 ` Eric Anholt
2016-11-22 5:21 ` Florian Fainelli
2016-11-18 18:58 ` [GIT PULL 4/4] bcm2835-defconfig-64-next-2016-11-18 Eric Anholt
2016-11-22 5:08 ` [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Florian Fainelli
3 siblings, 1 reply; 8+ messages in thread
From: Eric Anholt @ 2016-11-18 18:58 UTC (permalink / raw)
To: linux-arm-kernel
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-defconfig-next-2016-11-18
for you to fetch changes up to bab0cb90550467c71f4e1b73da406a2280c4f418:
ARM: bcm2835: add thermal driver to default config (2016-11-11 09:00:37 -0800)
----------------------------------------------------------------
This pull request enables the BCM2835 (Raspberry Pi) thermal driver in
the Pi1 defconfig.
----------------------------------------------------------------
Martin Sperl (1):
ARM: bcm2835: add thermal driver to default config
arch/arm/configs/bcm2835_defconfig | 2 ++
1 file changed, 2 insertions(+)
^ permalink raw reply [flat|nested] 8+ messages in thread* [GIT PULL 4/4] bcm2835-defconfig-64-next-2016-11-18
2016-11-18 18:58 [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Eric Anholt
2016-11-18 18:58 ` [GIT PULL 2/4] bcm2835-dt-64-next-2016-11-18 Eric Anholt
2016-11-18 18:58 ` [GIT PULL 3/4] bcm2835-defconfig-next-2016-11-18 Eric Anholt
@ 2016-11-18 18:58 ` Eric Anholt
2016-11-22 5:26 ` Florian Fainelli
2016-11-22 5:08 ` [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Florian Fainelli
3 siblings, 1 reply; 8+ messages in thread
From: Eric Anholt @ 2016-11-18 18:58 UTC (permalink / raw)
To: linux-arm-kernel
Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
are available in the git repository at:
https://github.com/anholt/linux tags/bcm2835-defconfig-64-next-2016-11-18
for you to fetch changes up to ac178e4280e65f4d0d14b13a7bfec3a43ff90e66:
ARM64: bcm2835: add thermal driver to default config (2016-11-11 09:00:00 -0800)
----------------------------------------------------------------
This pull enables the BCM2837 (Pi 3) thermal driver in the defconfig.
----------------------------------------------------------------
Martin Sperl (1):
ARM64: bcm2835: add thermal driver to default config
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
^ permalink raw reply [flat|nested] 8+ messages in thread* [GIT PULL 1/4] bcm2835-dt-next-2016-11-18
2016-11-18 18:58 [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Eric Anholt
` (2 preceding siblings ...)
2016-11-18 18:58 ` [GIT PULL 4/4] bcm2835-defconfig-64-next-2016-11-18 Eric Anholt
@ 2016-11-22 5:08 ` Florian Fainelli
3 siblings, 0 replies; 8+ messages in thread
From: Florian Fainelli @ 2016-11-22 5:08 UTC (permalink / raw)
To: linux-arm-kernel
Le 18/11/2016 ? 10:58, Eric Anholt a ?crit :
> Linux 4.9-rc1 (2016-10-15 12:17:50 -0700)
>
> are available in the git repository at:
>
> https://github.com/anholt/linux tags/bcm2835-dt-next-2016-11-18
>
> for you to fetch changes up to 3a1689ea752436917c5ce4487527ed6c444630ee:
>
> ARM: bcm2835: Add names for the RPi Zero GPIO lines (2016-11-16 13:54:36 -0800)
>
> ----------------------------------------------------------------
> This pull request brings in DT changes for BCM2835: pinctrl setup
> cleanups, GPIO line naming, and the node for the new thermal driver.
Merged, thanks Eric!
--
Florian
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-11-22 5:26 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-18 18:58 [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Eric Anholt
2016-11-18 18:58 ` [GIT PULL 2/4] bcm2835-dt-64-next-2016-11-18 Eric Anholt
2016-11-22 5:13 ` Florian Fainelli
2016-11-18 18:58 ` [GIT PULL 3/4] bcm2835-defconfig-next-2016-11-18 Eric Anholt
2016-11-22 5:21 ` Florian Fainelli
2016-11-18 18:58 ` [GIT PULL 4/4] bcm2835-defconfig-64-next-2016-11-18 Eric Anholt
2016-11-22 5:26 ` Florian Fainelli
2016-11-22 5:08 ` [GIT PULL 1/4] bcm2835-dt-next-2016-11-18 Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).