[PATCH 00/19] Arm cpu schema clean-ups

[PATCH 00/19] Arm cpu schema clean-ups

[Rob Herring (Arm)]

The Arm cpu.yaml schema fails to restrict allowed properties in 'cpu' 
nodes. The result, not surprisely, is a number of additional properties 
and errors in .dts files. This series resolves those issues.

There's still more properties in arm32 DTS files which I have not 
documented. Mostly yet more supply names and "fsl,soc-operating-points". 
What's a few more warnings on the 10000s of warnings...

The .dts files can be taken by the respective SoC maintainers. I will 
take the binding changes.

Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
---
Rob Herring (Arm) (19):
      arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties
      arm64: dts: broadcom: bcm2712: Use "l2-cache" for L2 cache node names
      arm64: dts: morello: Fix-up cache nodes
      arm64: dts: microchip: sparx5: Fix CPU node "enable-method" property dependencies
      arm64: dts: qcom: qdu1000: Fix qcom,freq-domain
      arm64: dts: qcom: msm8939: Fix CPU node "enable-method" property dependencies
      arm64: dts: qcom: msm8992-lg-h815: Fix CPU node "enable-method" property dependencies
      arm: dts: qcom: msm8916: Move "qcom,acc" and "qcom,saw" to 32-bit .dtsi
      arm: dts: qcom: sdx55/sdx65: Fix CPU power-domain-names
      arm/arm64: dts: imx: Drop redundant CPU "clock-latency"
      arm: dts: qcom: ipq4019: Drop redundant CPU "clock-latency"
      arm: dts: rockchip: Drop redundant CPU "clock-latency"
      arm64: dts: amlogic: Drop redundant CPU "clock-latency"
      dt-bindings: arm/cpus: Add schemas for "enable-method" dependencies
      dt-bindings: arm/cpus: Re-wrap 'description' entries
      dt-bindings: Reference opp-v1 schema in CPU schemas
      dt-bindings: arm/cpus: Add missing properties
      dt-bindings: arm/cpus: Add power-domains constraints
      dt-bindings: cpufreq: Drop redundant Mediatek binding

 Documentation/devicetree/bindings/arm/cpus.yaml    | 220 ++++++++++--------
 .../bindings/cpufreq/cpufreq-mediatek.txt          | 250 ---------------------
 Documentation/devicetree/bindings/mips/cpus.yaml   |   3 +-
 Documentation/devicetree/bindings/opp/opp-v1.yaml  |  18 +-
 arch/arm/boot/dts/nxp/imx/imx7s.dtsi               |   1 -
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi           |   4 -
 arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi       |   8 +
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi             |   2 +-
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi             |   2 +-
 arch/arm/boot/dts/rockchip/rk3128.dtsi             |   8 +-
 arch/arm/boot/dts/rockchip/rk3188.dtsi             |   1 -
 arch/arm/boot/dts/rockchip/rk322x.dtsi             |   1 -
 arch/arm/boot/dts/rockchip/rk3288.dtsi             |   5 +-
 arch/arm/boot/dts/rockchip/rv1108.dtsi             |   1 -
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi       |   4 -
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi       |   4 -
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts  |   4 -
 .../boot/dts/amlogic/meson-g12a-radxa-zero.dts     |   4 -
 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts  |   4 -
 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts    |   4 -
 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts |   4 -
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi        |   1 +
 .../dts/amlogic/meson-g12b-a311d-libretech-cc.dts  |   6 -
 arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi  |   2 +
 .../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi  |   6 -
 .../boot/dts/amlogic/meson-g12b-bananapi.dtsi      |   6 -
 .../boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi   |   6 -
 .../dts/amlogic/meson-g12b-odroid-go-ultra.dts     |   6 -
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi |   6 -
 .../boot/dts/amlogic/meson-g12b-radxa-zero2.dts    |   6 -
 arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi  |   2 +
 arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi   |   6 -
 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi   |   4 -
 .../arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi |   4 -
 .../boot/dts/amlogic/meson-sm1-khadas-vim3l.dts    |   4 -
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi  |   4 -
 .../dts/amlogic/meson-sm1-s905d3-libretech-cc.dts  |   4 -
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts   |   4 -
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi         |   1 +
 arch/arm64/boot/dts/arm/morello.dtsi               |  22 +-
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi          |   8 +-
 arch/arm64/boot/dts/freescale/imx8mm.dtsi          |   4 -
 arch/arm64/boot/dts/freescale/imx8mn.dtsi          |   4 -
 arch/arm64/boot/dts/freescale/imx8mp.dtsi          |   4 -
 arch/arm64/boot/dts/freescale/imx8mq.dtsi          |   4 -
 .../boot/dts/microchip/sparx5_pcb_common.dtsi      |   2 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |   8 -
 arch/arm64/boot/dts/qcom/msm8939.dtsi              |  24 +-
 arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts       |   6 +
 arch/arm64/boot/dts/qcom/qdu1000.dtsi              |   8 +-
 50 files changed, 210 insertions(+), 514 deletions(-)
---
base-commit: a2cc6ff5ec8f91bc463fd3b0c26b61166a07eb11
change-id: 20250403-dt-cpu-schema-48e66c7f6a90

Best regards,
-- 
Rob Herring (Arm) <robh@kernel.org>

[PATCH 01/19] arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties

[Rob Herring (Arm)]

'clock-latency-ns' is not a valid property for CPU nodes. It belongs in
OPP table (which has it). Drop them from the CPU nodes.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 4 ----
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 4 ----
 2 files changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index d3caf27b6a55..48802bf02f3b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -16,7 +16,6 @@ cpu0: cpu@0 {
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -26,7 +25,6 @@ cpu1: cpu@1 {
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -36,7 +34,6 @@ cpu2: cpu@2 {
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 
@@ -46,7 +43,6 @@ cpu3: cpu@3 {
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 2301c59b41b1..73e8604315c5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -27,7 +27,6 @@ cpu0: cpu@0 {
 			reg = <0>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -44,7 +43,6 @@ cpu1: cpu@1 {
 			reg = <1>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -61,7 +59,6 @@ cpu2: cpu@2 {
 			reg = <2>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;
@@ -78,7 +75,6 @@ cpu3: cpu@3 {
 			reg = <3>;
 			enable-method = "psci";
 			clocks = <&ccu CLK_CPUX>;
-			clock-latency-ns = <244144>; /* 8 32k periods */
 			#cooling-cells = <2>;
 			i-cache-size = <0x8000>;
 			i-cache-line-size = <64>;

-- 
2.47.2

[PATCH 02/19] arm64: dts: broadcom: bcm2712: Use "l2-cache" for L2 cache node names

[Rob Herring (Arm)]

There's no need include the CPU number in the L2 cache node names as
the names are local to the CPU nodes. The documented node name is
also just "l2-cache".

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 9e610a89a337..ad0cac8e4444 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -64,7 +64,7 @@ cpu0: cpu@0 {
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l0>;
 
-			l2_cache_l0: l2-cache-l0 {
+			l2_cache_l0: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;
@@ -88,7 +88,7 @@ cpu1: cpu@1 {
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l1>;
 
-			l2_cache_l1: l2-cache-l1 {
+			l2_cache_l1: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;
@@ -112,7 +112,7 @@ cpu2: cpu@2 {
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l2>;
 
-			l2_cache_l2: l2-cache-l2 {
+			l2_cache_l2: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;
@@ -136,7 +136,7 @@ cpu3: cpu@3 {
 			i-cache-sets = <256>; // 64KiB(size)/64(line-size)=1024ways/4-way set
 			next-level-cache = <&l2_cache_l3>;
 
-			l2_cache_l3: l2-cache-l3 {
+			l2_cache_l3: l2-cache {
 				compatible = "cache";
 				cache-size = <0x80000>;
 				cache-line-size = <64>;

-- 
2.47.2

[PATCH 03/19] arm64: dts: morello: Fix-up cache nodes

[Rob Herring (Arm)]

There's no need include the CPU number in the L2 cache node names as
the names are local to the CPU nodes. The documented node name is
also just "l2-cache".

The L3 cache is not part of cpu@0/l2-cache as it is shared among all
cores. Move it to /cpus node which is the typical place for shared
caches.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/arm/morello.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/arm/morello.dtsi b/arch/arm64/boot/dts/arm/morello.dtsi
index 0bab0b3ea969..5bc1c725dc86 100644
--- a/arch/arm64/boot/dts/arm/morello.dtsi
+++ b/arch/arm64/boot/dts/arm/morello.dtsi
@@ -44,7 +44,7 @@ cpu0: cpu@0 {
 			next-level-cache = <&l2_0>;
 			clocks = <&scmi_dvfs 0>;
 
-			l2_0: l2-cache-0 {
+			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				/* 8 ways set associative */
@@ -53,13 +53,6 @@ l2_0: l2-cache-0 {
 				cache-sets = <2048>;
 				cache-unified;
 				next-level-cache = <&l3_0>;
-
-				l3_0: l3-cache {
-					compatible = "cache";
-					cache-level = <3>;
-					cache-size = <0x100000>;
-					cache-unified;
-				};
 			};
 		};
 
@@ -78,7 +71,7 @@ cpu1: cpu@100 {
 			next-level-cache = <&l2_1>;
 			clocks = <&scmi_dvfs 0>;
 
-			l2_1: l2-cache-1 {
+			l2_1: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				/* 8 ways set associative */
@@ -105,7 +98,7 @@ cpu2: cpu@10000 {
 			next-level-cache = <&l2_2>;
 			clocks = <&scmi_dvfs 1>;
 
-			l2_2: l2-cache-2 {
+			l2_2: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				/* 8 ways set associative */
@@ -132,7 +125,7 @@ cpu3: cpu@10100 {
 			next-level-cache = <&l2_3>;
 			clocks = <&scmi_dvfs 1>;
 
-			l2_3: l2-cache-3 {
+			l2_3: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 				/* 8 ways set associative */
@@ -143,6 +136,13 @@ l2_3: l2-cache-3 {
 				next-level-cache = <&l3_0>;
 			};
 		};
+
+		l3_0: l3-cache {
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x100000>;
+			cache-unified;
+		};
 	};
 
 	firmware {

-- 
2.47.2

[PATCH 04/19] arm64: dts: microchip: sparx5: Fix CPU node "enable-method" property dependencies

[Rob Herring (Arm)]

The "spin-table" enable-method requires "cpu-release-addr" property,
so add a dummy entry. It is assumed the bootloader will fill in the
correct values.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
index 32bb76b3202a..83bf5c81b5f7 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -12,10 +12,12 @@ &psci {
 
 &cpu0 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu1 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &uart0 {

-- 
2.47.2

[PATCH 05/19] arm64: dts: qcom: qdu1000: Fix qcom,freq-domain

[Rob Herring (Arm)]

The correct property name is 'qcom,freq-domain', not
'qcom,freq-domains'.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/qcom/qdu1000.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index f973aa8f7477..7c8d78fd7ebf 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -47,7 +47,7 @@ cpu0: cpu@0 {
 			enable-method = "psci";
 			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_0>;
 			l2_0: l2-cache {
 				compatible = "cache";
@@ -70,7 +70,7 @@ cpu1: cpu@100 {
 			enable-method = "psci";
 			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_100>;
 			l2_100: l2-cache {
 				compatible = "cache";
@@ -88,7 +88,7 @@ cpu2: cpu@200 {
 			enable-method = "psci";
 			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_200>;
 			l2_200: l2-cache {
 				compatible = "cache";
@@ -106,7 +106,7 @@ cpu3: cpu@300 {
 			enable-method = "psci";
 			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			qcom,freq-domains = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			next-level-cache = <&l2_300>;
 			l2_300: l2-cache {
 				compatible = "cache";

-- 
2.47.2

[PATCH 06/19] arm64: dts: qcom: msm8939: Fix CPU node "enable-method" property dependencies

[Rob Herring (Arm)]

The "qcom,acc" and "qcom,saw" properties aren't valid with "spin-table"
enable-method nor are they used on 64-bit kernels, so they can be
dropped.

The "spin-table" enable-method requires "cpu-release-addr" property,
so add a dummy entry. It is assumed the bootloader will fill in the
correct values.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8939.dtsi | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 7cd5660de1b3..36f2ba3fb81c 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -46,10 +46,9 @@ cpu0: cpu@100 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x100>;
 			next-level-cache = <&l2_1>;
-			qcom,acc = <&acc0>;
-			qcom,saw = <&saw0>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
@@ -64,10 +63,9 @@ cpu1: cpu@101 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x101>;
 			next-level-cache = <&l2_1>;
-			qcom,acc = <&acc1>;
-			qcom,saw = <&saw1>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
@@ -77,10 +75,9 @@ cpu2: cpu@102 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x102>;
 			next-level-cache = <&l2_1>;
-			qcom,acc = <&acc2>;
-			qcom,saw = <&saw2>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
@@ -90,10 +87,9 @@ cpu3: cpu@103 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x103>;
 			next-level-cache = <&l2_1>;
-			qcom,acc = <&acc3>;
-			qcom,saw = <&saw3>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs1_mbox>;
 			#cooling-cells = <2>;
@@ -103,9 +99,8 @@ cpu4: cpu@0 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x0>;
-			qcom,acc = <&acc4>;
-			qcom,saw = <&saw4>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;
@@ -121,10 +116,9 @@ cpu5: cpu@1 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x1>;
 			next-level-cache = <&l2_0>;
-			qcom,acc = <&acc5>;
-			qcom,saw = <&saw5>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;
@@ -134,10 +128,9 @@ cpu6: cpu@2 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x2>;
 			next-level-cache = <&l2_0>;
-			qcom,acc = <&acc6>;
-			qcom,saw = <&saw6>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;
@@ -147,10 +140,9 @@ cpu7: cpu@3 {
 			compatible = "arm,cortex-a53";
 			device_type = "cpu";
 			enable-method = "spin-table";
+			cpu-release-addr = /bits/ 64 <0>;
 			reg = <0x3>;
 			next-level-cache = <&l2_0>;
-			qcom,acc = <&acc7>;
-			qcom,saw = <&saw7>;
 			cpu-idle-states = <&cpu_sleep_0>;
 			clocks = <&apcs0_mbox>;
 			#cooling-cells = <2>;

-- 
2.47.2

[PATCH 07/19] arm64: dts: qcom: msm8992-lg-h815: Fix CPU node "enable-method" property dependencies

[Rob Herring (Arm)]

The "spin-table" enable-method requires "cpu-release-addr" property,
so add a dummy entry. It is assumed the bootloader will fill in the
correct values.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
index 4520d5d51a29..6a231afad85d 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
@@ -93,26 +93,32 @@ key-vol-up {
 
 &cpu0 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu1 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu2 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu3 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu4 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &cpu5 {
 	enable-method = "spin-table";
+	cpu-release-addr = /bits/ 64 <0>;
 };
 
 &pm8994_resin {

-- 
2.47.2

[PATCH 08/19] arm: dts: qcom: msm8916: Move "qcom,acc" and "qcom,saw" to 32-bit .dtsi

[Rob Herring (Arm)]

The "qcom,acc" and "qcom,saw" properties are only used with 32-bit
kernels. Of course, booting a 64-bit or 32-bit kernel shouldn't matter
to the DTS, but the "enable-method" is already different for 32-bit.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi | 8 ++++++++
 arch/arm64/boot/dts/qcom/msm8916.dtsi        | 8 --------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
index 94b7694eeeff..594cc4a3a78b 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8916-smp.dtsi
@@ -4,15 +4,23 @@ / {
 	cpus {
 		cpu@0 {
 			enable-method = "qcom,msm8916-smp";
+			qcom,acc = <&cpu0_acc>;
+			qcom,saw = <&cpu0_saw>;
 		};
 		cpu@1 {
 			enable-method = "qcom,msm8916-smp";
+			qcom,acc = <&cpu1_acc>;
+			qcom,saw = <&cpu1_saw>;
 		};
 		cpu@2 {
 			enable-method = "qcom,msm8916-smp";
+			qcom,acc = <&cpu2_acc>;
+			qcom,saw = <&cpu2_saw>;
 		};
 		cpu@3 {
 			enable-method = "qcom,msm8916-smp";
+			qcom,acc = <&cpu3_acc>;
+			qcom,saw = <&cpu3_saw>;
 		};
 
 		idle-states {
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8f35c9af1878..88e452752de6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -144,8 +144,6 @@ cpu0: cpu@0 {
 			#cooling-cells = <2>;
 			power-domains = <&cpu_pd0>;
 			power-domain-names = "psci";
-			qcom,acc = <&cpu0_acc>;
-			qcom,saw = <&cpu0_saw>;
 		};
 
 		cpu1: cpu@1 {
@@ -159,8 +157,6 @@ cpu1: cpu@1 {
 			#cooling-cells = <2>;
 			power-domains = <&cpu_pd1>;
 			power-domain-names = "psci";
-			qcom,acc = <&cpu1_acc>;
-			qcom,saw = <&cpu1_saw>;
 		};
 
 		cpu2: cpu@2 {
@@ -174,8 +170,6 @@ cpu2: cpu@2 {
 			#cooling-cells = <2>;
 			power-domains = <&cpu_pd2>;
 			power-domain-names = "psci";
-			qcom,acc = <&cpu2_acc>;
-			qcom,saw = <&cpu2_saw>;
 		};
 
 		cpu3: cpu@3 {
@@ -189,8 +183,6 @@ cpu3: cpu@3 {
 			#cooling-cells = <2>;
 			power-domains = <&cpu_pd3>;
 			power-domain-names = "psci";
-			qcom,acc = <&cpu3_acc>;
-			qcom,saw = <&cpu3_saw>;
 		};
 
 		l2_0: l2-cache {

-- 
2.47.2

[PATCH 09/19] arm: dts: qcom: sdx55/sdx65: Fix CPU power-domain-names

[Rob Herring (Arm)]

"rpmhpd" is not documented nor used anywhere. As the enable-method is
"psci" use "psci" for the power-domain name.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 2 +-
 arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 39530eb580ea..64d9858b4248 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -57,7 +57,7 @@ cpu0: cpu@0 {
 			enable-method = "psci";
 			clocks = <&apcs>;
 			power-domains = <&rpmhpd SDX55_CX>;
-			power-domain-names = "rpmhpd";
+			power-domain-names = "psci";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
index 6b23ee676c9e..bfd04e53c5a8 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi
@@ -58,7 +58,7 @@ cpu0: cpu@0 {
 			enable-method = "psci";
 			clocks = <&apcs>;
 			power-domains = <&rpmhpd SDX65_CX_AO>;
-			power-domain-names = "rpmhpd";
+			power-domain-names = "psci";
 			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};

-- 
2.47.2

[PATCH 10/19] arm/arm64: dts: imx: Drop redundant CPU "clock-latency"

[Rob Herring (Arm)]

The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP tables have values of 150000, so it can be
removed.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/nxp/imx/imx7s.dtsi      | 1 -
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 4 ----
 arch/arm64/boot/dts/freescale/imx8mn.dtsi | 4 ----
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ----
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ----
 5 files changed, 17 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
index 2629968001a7..9235dd7e93bb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi
@@ -73,7 +73,6 @@ cpu0: cpu@0 {
 			device_type = "cpu";
 			reg = <0>;
 			clock-frequency = <792000000>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clks IMX7D_CLK_ARM>;
 			cpu-idle-states = <&cpu_sleep_wait>;
 			operating-points-v2 = <&cpu0_opp_table>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 4de3bf22902b..cfebaa01217e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -62,7 +62,6 @@ A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@ A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@ A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@ A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MM_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index a5f9cfb46e5d..848ba5e46ee6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -62,7 +62,6 @@ A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -83,7 +82,6 @@ A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -102,7 +100,6 @@ A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -121,7 +118,6 @@ A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MN_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index ce6793b2d57e..f8afdba71c36 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -65,7 +65,6 @@ A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -86,7 +85,6 @@ A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -105,7 +103,6 @@ A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -124,7 +121,6 @@ A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>;
 			clocks = <&clk IMX8MP_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index d51de8d899b2..d27b824995eb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -106,7 +106,6 @@ A53_0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -126,7 +125,6 @@ A53_1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x1>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -144,7 +142,6 @@ A53_2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x2>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -162,7 +159,6 @@ A53_3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x3>;
-			clock-latency = <61036>; /* two CLK32 periods */
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;

-- 
2.47.2

[PATCH 11/19] arm: dts: qcom: ipq4019: Drop redundant CPU "clock-latency"

[Rob Herring (Arm)]

The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP table has values of 256000, so it can be
removed.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index 06b20c196faf..fceb2f5f5482 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -53,7 +53,6 @@ cpu@0 {
 			reg = <0x0>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -67,7 +66,6 @@ cpu@1 {
 			reg = <0x1>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -81,7 +79,6 @@ cpu@2 {
 			reg = <0x2>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 
@@ -95,7 +92,6 @@ cpu@3 {
 			reg = <0x3>;
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
-			clock-latency = <256000>;
 			operating-points-v2 = <&cpu0_opp_table>;
 		};
 

-- 
2.47.2

[PATCH 12/19] arm: dts: rockchip: Drop redundant CPU "clock-latency"

[Rob Herring (Arm)]

The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". Add any missing "clock-latency-ns" properties and
remove "clock-latency".

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/rockchip/rk3128.dtsi | 8 +++++++-
 arch/arm/boot/dts/rockchip/rk3188.dtsi | 1 -
 arch/arm/boot/dts/rockchip/rk322x.dtsi | 1 -
 arch/arm/boot/dts/rockchip/rk3288.dtsi | 5 +----
 arch/arm/boot/dts/rockchip/rv1108.dtsi | 1 -
 5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi
index d4572146d135..c49099954c28 100644
--- a/arch/arm/boot/dts/rockchip/rk3128.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi
@@ -48,7 +48,6 @@ cpu0: cpu@f00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu_opp_table>;
@@ -87,31 +86,38 @@ cpu_opp_table: opp-table-0 {
 		opp-216000000 {
 			opp-hz = /bits/ 64 <216000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-408000000 {
 			opp-hz = /bits/ 64 <408000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-696000000 {
 			opp-hz = /bits/ 64 <696000000>;
 			opp-microvolt = <975000 975000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <1075000 1075000 1325000>;
 			opp-suspend;
+			clock-latency-ns = <40000>;
 		};
 		opp-1008000000 {
 			opp-hz = /bits/ 64 <1008000000>;
 			opp-microvolt = <1200000 1200000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1325000 1325000 1325000>;
+			clock-latency-ns = <40000>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/rockchip/rk3188.dtsi b/arch/arm/boot/dts/rockchip/rk3188.dtsi
index 44b54af0bbf9..850bd6e67895 100644
--- a/arch/arm/boot/dts/rockchip/rk3188.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3188.dtsi
@@ -23,7 +23,6 @@ cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0x0>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			resets = <&cru SRST_CORE0>;
diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi
index 96421355c274..cd11a018105b 100644
--- a/arch/arm/boot/dts/rockchip/rk322x.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi
@@ -36,7 +36,6 @@ cpu0: cpu@f00 {
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			enable-method = "psci";
 		};
diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi
index 3f1d640afafa..42d705b544ec 100644
--- a/arch/arm/boot/dts/rockchip/rk3288.dtsi
+++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi
@@ -70,7 +70,6 @@ cpu0: cpu@500 {
 			resets = <&cru SRST_CORE0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -81,7 +80,6 @@ cpu1: cpu@501 {
 			resets = <&cru SRST_CORE1>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -92,7 +90,6 @@ cpu2: cpu@502 {
 			resets = <&cru SRST_CORE2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -103,7 +100,6 @@ cpu3: cpu@503 {
 			resets = <&cru SRST_CORE3>;
 			operating-points-v2 = <&cpu_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			dynamic-power-coefficient = <370>;
 		};
@@ -116,6 +112,7 @@ cpu_opp_table: opp-table-0 {
 		opp-126000000 {
 			opp-hz = /bits/ 64 <126000000>;
 			opp-microvolt = <900000>;
+			clock-latency-ns = <40000>;
 		};
 		opp-216000000 {
 			opp-hz = /bits/ 64 <216000000>;
diff --git a/arch/arm/boot/dts/rockchip/rv1108.dtsi b/arch/arm/boot/dts/rockchip/rv1108.dtsi
index f3291f3bbc6f..42a4d72597a5 100644
--- a/arch/arm/boot/dts/rockchip/rv1108.dtsi
+++ b/arch/arm/boot/dts/rockchip/rv1108.dtsi
@@ -32,7 +32,6 @@ cpu0: cpu@f00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
-			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 			#cooling-cells = <2>; /* min followed by max */
 			dynamic-power-coefficient = <75>;

-- 
2.47.2

[PATCH 13/19] arm64: dts: amlogic: Drop redundant CPU "clock-latency"

[Rob Herring (Arm)]

The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". Add any missing "clock-latency-ns" properties and
remove "clock-latency".

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts             | 4 ----
 arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts         | 4 ----
 arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts             | 4 ----
 arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts               | 4 ----
 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts            | 4 ----
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi                   | 1 +
 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts | 6 ------
 arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi             | 2 ++
 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi      | 6 ------
 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi          | 6 ------
 arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi       | 6 ------
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts    | 6 ------
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi            | 6 ------
 arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts        | 6 ------
 arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi             | 2 ++
 arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi              | 6 ------
 arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi              | 4 ----
 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi           | 4 ----
 arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts        | 4 ----
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi             | 4 ----
 arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts | 4 ----
 arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts              | 4 ----
 arch/arm64/boot/dts/amlogic/meson-sm1.dtsi                    | 1 +
 23 files changed, 6 insertions(+), 92 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
index 9aa36f17ffa2..d0a3b4b9229c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
@@ -267,28 +267,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
index 952b8d02e5c2..4353485c6f26 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
@@ -220,28 +220,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 52fbc5103e45..f39fcabc763f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -314,28 +314,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 5407049d2647..b5bf8ecc91e6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -407,28 +407,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &clkc_audio {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 01da83658ae3..5ab460a3e637 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -263,28 +263,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 543e70669df5..deee61dbe074 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -62,6 +62,7 @@ cpu_opp_table: opp-table {
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
index adedc1340c78..415248931ab1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
@@ -76,42 +76,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index 8e9ad1e51d66..8ecb5bd125c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -14,6 +14,7 @@ cpu_opp_table_0: opp-table-0 {
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <761000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -54,6 +55,7 @@ cpub_opp_table_1: opp-table-1 {
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
index 92e8b26ecccc..39011b645128 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
@@ -155,42 +155,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
index 54663c55a20e..1b08303c4282 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
@@ -263,42 +263,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
index 48650bad230d..fc737499f207 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
@@ -51,42 +51,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_ab {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
index e21831dfceee..d5938a4a6da3 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
@@ -281,42 +281,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 /* RK817 only supports 12.5mV steps, round up the values */
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
index 7e8964bacfce..3298d59833b6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
@@ -227,42 +227,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
index fc05ecf90714..1e5c6f984945 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -259,42 +259,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu_thermal {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 44c23c984034..19cad93a6889 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -14,6 +14,7 @@ cpu_opp_table_0: opp-table-0 {
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <731000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
@@ -59,6 +60,7 @@ cpub_opp_table_1: opp-table-1 {
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <771000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index a7a0fc264cdc..9b6d780eada7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -213,42 +213,36 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table_0>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu100 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu101 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu102 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu103 {
 	cpu-supply = <&vddcpu_a>;
 	operating-points-v2 = <&cpub_opp_table_1>;
 	clocks = <&clkc CLKID_CPUB_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
index a3463149db3d..9be3084b090d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -147,28 +147,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &cvbs_vdac_port {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 40db95f64636..538b35036954 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -185,28 +185,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index 5d75ad3f3e46..a3d9b66b6878 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -51,28 +51,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &pwm_AO_cd {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index ad8d07883760..c4524eb4f099 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -250,28 +250,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ext_mdio {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
index 537370db360f..5daadfb170b4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
@@ -64,26 +64,22 @@ &cpu0 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu_b>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 37d7f64b6d5d..024d2eb8e6ee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -359,28 +359,24 @@ &cpu0 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu1 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU1_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu2 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU2_CLK>;
-	clock-latency = <50000>;
 };
 
 &cpu3 {
 	cpu-supply = <&vddcpu>;
 	operating-points-v2 = <&cpu_opp_table>;
 	clocks = <&clkc CLKID_CPU3_CLK>;
-	clock-latency = <50000>;
 };
 
 &ethmac {
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 97e4b52066dc..966ebb19cc55 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -100,6 +100,7 @@ cpu_opp_table: opp-table {
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <770000>;
+			clock-latency-ns = <50000>;
 		};
 
 		opp-1200000000 {

-- 
2.47.2

[PATCH 14/19] dt-bindings: arm/cpus: Add schemas for "enable-method" dependencies

[Rob Herring (Arm)]

Replace the prose for properties dependent on specific "enable-method"
values with schemas defining the same requirements.

Both "qcom,acc" and "qcom,saw" properties appear to be required for any
of the Qualcomm enable-method values, so the schema is a bit simpler
than what the text said. The references to arm/msm/qcom,saw2.txt and
arm/msm/qcom,kpss-acc.txt are out of date, so just drop them.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 82 +++++++++++++++----------
 1 file changed, 49 insertions(+), 33 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 2e666b2a4dcd..963a9320cba8 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -273,8 +273,6 @@ properties:
     description:
       The DT specification defines this as 64-bit always, but some 32-bit Arm
       systems have used a 32-bit value which must be supported.
-      Required for systems that have an "enable-method"
-        property value of "spin-table".
 
   cpu-idle-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
@@ -333,24 +331,13 @@ properties:
 
   qcom,saw:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: |
-      Specifies the SAW* node associated with this CPU.
-
-      Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
-
-      * arm/msm/qcom,saw2.txt
+    description:
+      Specifies the SAW node associated with this CPU.
 
   qcom,acc:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: |
-      Specifies the ACC* node associated with this CPU.
-
-      Required for systems that have an "enable-method" property
-      value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" or
-      "qcom,msm8916-smp".
-
-      * arm/msm/qcom,kpss-acc.txt
+    description:
+      Specifies the ACC node associated with this CPU.
 
   rockchip,pmu:
     $ref: /schemas/types.yaml#/definitions/phandle
@@ -378,22 +365,51 @@ properties:
       formed by encoding the target CPU id into the low bits of the
       physical start address it should jump to.
 
-if:
-  # If the enable-method property contains one of those values
-  properties:
-    enable-method:
-      contains:
-        enum:
-          - brcm,bcm11351-cpu-method
-          - brcm,bcm23550
-          - brcm,bcm-nsp-smp
-  # and if enable-method is present
-  required:
-    - enable-method
-
-then:
-  required:
-    - secondary-boot-reg
+allOf:
+  - if:
+      # If the enable-method property contains one of those values
+      properties:
+        enable-method:
+          contains:
+            enum:
+              - brcm,bcm11351-cpu-method
+              - brcm,bcm23550
+              - brcm,bcm-nsp-smp
+      # and if enable-method is present
+      required:
+        - enable-method
+    then:
+      required:
+        - secondary-boot-reg
+  - if:
+      properties:
+        enable-method:
+          enum:
+            - spin-table
+            - renesas,r9a06g032-smp
+      required:
+        - enable-method
+    then:
+      required:
+        - cpu-release-addr
+  - if:
+      properties:
+        enable-method:
+          enum:
+            - qcom,kpss-acc-v1
+            - qcom,kpss-acc-v2
+            - qcom,msm8226-smp
+            - qcom,msm8916-smp
+      required:
+        - enable-method
+    then:
+      required:
+        - qcom,acc
+        - qcom,saw
+    else:
+      properties:
+        qcom,acc: false
+        qcom,saw: false
 
 required:
   - device_type

-- 
2.47.2

[PATCH 15/19] dt-bindings: arm/cpus: Re-wrap 'description' entries

[Rob Herring (Arm)]

Some of the 'description' entries have odd line wrapping and incorrect
YAML block modifiers. The 'description' entries should typically wrap
at 80 chars. Reformat the entries to follow that along with using '>'
modifiers as appropriate.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 85 +++++++++++--------------
 1 file changed, 36 insertions(+), 49 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 963a9320cba8..3e76de3e950d 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -10,9 +10,9 @@ maintainers:
   - Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 
 description: |+
-  The device tree allows to describe the layout of CPUs in a system through
-  the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
-  defining properties for every cpu.
+  The device tree allows to describe the layout of CPUs in a system through the
+  "cpus" node, which in turn contains a number of subnodes (ie "cpu") defining
+  properties for every cpu.
 
   Bindings for CPU nodes follow the Devicetree Specification, available from:
 
@@ -41,45 +41,40 @@ description: |+
 properties:
   reg:
     maxItems: 1
-    description: |
-      Usage and definition depend on ARM architecture version and
-      configuration:
+    description: >
+      Usage and definition depend on ARM architecture version and configuration:
 
-      On uniprocessor ARM architectures previous to v7
-      this property is required and must be set to 0.
+      On uniprocessor ARM architectures previous to v7 this property is required
+      and must be set to 0.
 
-      On ARM 11 MPcore based systems this property is
-        required and matches the CPUID[11:0] register bits.
+      On ARM 11 MPcore based systems this property is required and matches the
+      CPUID[11:0] register bits.
 
-        Bits [11:0] in the reg cell must be set to
-        bits [11:0] in CPU ID register.
+        Bits [11:0] in the reg cell must be set to bits [11:0] in CPU ID register.
 
         All other bits in the reg cell must be set to 0.
 
-      On 32-bit ARM v7 or later systems this property is
-        required and matches the CPU MPIDR[23:0] register
-        bits.
+      On 32-bit ARM v7 or later systems this property is required and matches
+      the CPU MPIDR[23:0] register bits.
 
-        Bits [23:0] in the reg cell must be set to
-        bits [23:0] in MPIDR.
+        Bits [23:0] in the reg cell must be set to bits [23:0] in MPIDR.
 
         All other bits in the reg cell must be set to 0.
 
-      On ARM v8 64-bit systems this property is required
-        and matches the MPIDR_EL1 register affinity bits.
+      On ARM v8 64-bit systems this property is required and matches the
+      MPIDR_EL1 register affinity bits.
 
         * If cpus node's #address-cells property is set to 2
 
-          The first reg cell bits [7:0] must be set to
-          bits [39:32] of MPIDR_EL1.
+          The first reg cell bits [7:0] must be set to bits [39:32] of
+          MPIDR_EL1.
 
-          The second reg cell bits [23:0] must be set to
-          bits [23:0] of MPIDR_EL1.
+          The second reg cell bits [23:0] must be set to bits [23:0] of
+          MPIDR_EL1.
 
         * If cpus node's #address-cells property is set to 1
 
-          The reg cell bits [23:0] must be set to bits [23:0]
-          of MPIDR_EL1.
+          The reg cell bits [23:0] must be set to bits [23:0] of MPIDR_EL1.
 
       All other bits in the reg cells must be set to 0.
 
@@ -278,29 +273,26 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
-    description: |
-      List of phandles to idle state nodes supported
-      by this cpu (see ./idle-states.yaml).
+    description:
+      List of phandles to idle state nodes supported by this cpu (see
+      ./idle-states.yaml).
 
   capacity-dmips-mhz:
     description:
       u32 value representing CPU capacity (see ../cpu/cpu-capacity.txt) in
-      DMIPS/MHz, relative to highest capacity-dmips-mhz
-      in the system.
+      DMIPS/MHz, relative to highest capacity-dmips-mhz in the system.
 
   cci-control-port: true
 
   dynamic-power-coefficient:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description:
-      A u32 value that represents the running time dynamic
-      power coefficient in units of uW/MHz/V^2. The
-      coefficient can either be calculated from power
+    description: >
+      A u32 value that represents the running time dynamic power coefficient in
+      units of uW/MHz/V^2. The coefficient can either be calculated from power
       measurements or derived by analysis.
 
-      The dynamic power consumption of the CPU  is
-      proportional to the square of the Voltage (V) and
-      the clock frequency (f). The coefficient is used to
+      The dynamic power consumption of the CPU  is proportional to the square of
+      the Voltage (V) and the clock frequency (f). The coefficient is used to
       calculate the dynamic power as below -
 
       Pdyn = dynamic-power-coefficient * V^2 * f
@@ -309,10 +301,6 @@ properties:
 
   performance-domains:
     maxItems: 1
-    description:
-      List of phandles and performance domain specifiers, as defined by
-      bindings of the performance domain provider. See also
-      dvfs/performance-domain.yaml.
 
   power-domains:
     description:
@@ -341,22 +329,21 @@ properties:
 
   rockchip,pmu:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: |
+    description: >
       Specifies the syscon node controlling the cpu core power domains.
 
-      Optional for systems that have an "enable-method"
-      property value of "rockchip,rk3066-smp"
-      While optional, it is the preferred way to get access to
-      the cpu-core power-domains.
+      Optional for systems that have an "enable-method" property value of
+      "rockchip,rk3066-smp". While optional, it is the preferred way to get
+      access to the cpu-core power-domains.
 
   secondary-boot-reg:
     $ref: /schemas/types.yaml#/definitions/uint32
-    description: |
+    description: >
       Required for systems that have an "enable-method" property value of
       "brcm,bcm11351-cpu-method", "brcm,bcm23550" or "brcm,bcm-nsp-smp".
 
-      This includes the following SoCs: |
-      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550
+      This includes the following SoCs:
+      BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664, BCM23550,
       BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
 
       The secondary-boot-reg property is a u32 value that specifies the

-- 
2.47.2

[PATCH 16/19] dt-bindings: Reference opp-v1 schema in CPU schemas

[Rob Herring (Arm)]

The opp-v1 binding is only used in MIPS and arm32 CPU nodes, so add a
$ref to it in the CPU schemas and drop the "select".

As opp-v1 has long been deprecated, mark it as such.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml   | 1 +
 Documentation/devicetree/bindings/mips/cpus.yaml  | 3 ++-
 Documentation/devicetree/bindings/opp/opp-v1.yaml | 2 +-
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 3e76de3e950d..3d2b6286efb8 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -353,6 +353,7 @@ properties:
       physical start address it should jump to.
 
 allOf:
+  - $ref: /schemas/opp/opp-v1.yaml#
   - if:
       # If the enable-method property contains one of those values
       properties:
diff --git a/Documentation/devicetree/bindings/mips/cpus.yaml b/Documentation/devicetree/bindings/mips/cpus.yaml
index a85137add668..471373ad0cfb 100644
--- a/Documentation/devicetree/bindings/mips/cpus.yaml
+++ b/Documentation/devicetree/bindings/mips/cpus.yaml
@@ -50,6 +50,7 @@ properties:
   device_type: true
 
 allOf:
+  - $ref: /schemas/opp/opp-v1.yaml#
   - if:
       properties:
         compatible:
@@ -68,7 +69,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml
index 07e26c267815..1b59b103dab6 100644
--- a/Documentation/devicetree/bindings/opp/opp-v1.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -18,7 +18,7 @@ description: |+
 
   This binding only supports voltage-frequency pairs.
 
-select: true
+deprecated: true
 
 properties:
   operating-points:

-- 
2.47.2

[PATCH 17/19] dt-bindings: arm/cpus: Add missing properties

[Rob Herring (Arm)]

The Arm CPU schema is missing a number of properties already in use.
This has gone unnoticed as extra properties have not been restricted.
Add a missing reference to cpu.yaml, and add all the missing properties.

As "clock-latency" and "voltage-tolerance" are related to opp-v1, add
those properties to the opp-v1.yaml schema.

With this, other properties can be prevented from creeping in with
'unevaluatedProperties: false'.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml   | 46 ++++++++++++++++++++++-
 Documentation/devicetree/bindings/opp/opp-v1.yaml | 16 ++++++++
 2 files changed, 61 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 3d2b6286efb8..6f74ebfd38df 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -299,6 +299,16 @@ properties:
 
       where voltage is in V, frequency is in MHz.
 
+  interconnects:
+    minItems: 1
+    maxItems: 2
+
+  nvmem-cells:
+    maxItems: 1
+
+  nvmem-cell-names:
+    const: speed_grade
+
   performance-domains:
     maxItems: 1
 
@@ -317,6 +327,31 @@ properties:
       corresponding to the index of an SCMI performance domain provider, must be
       "perf".
 
+  resets:
+    maxItems: 1
+
+  arm-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
+
+  cpu0-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
+
+  mem-supply: true
+
+  proc-supply:
+    deprecated: true
+    description: Use 'cpu-supply' instead
+
+  sram-supply:
+    deprecated: true
+    description: Use 'mem-supply' instead
+
+  mediatek,cci:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Link to Mediatek Cache Coherent Interconnect
+
   qcom,saw:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -327,6 +362,11 @@ properties:
     description:
       Specifies the ACC node associated with this CPU.
 
+  qcom,freq-domain:
+    description: Specifies the QCom CPUFREQ HW associated with the CPU.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
   rockchip,pmu:
     $ref: /schemas/types.yaml#/definitions/phandle
     description: >
@@ -352,7 +392,11 @@ properties:
       formed by encoding the target CPU id into the low bits of the
       physical start address it should jump to.
 
+  thermal-idle:
+    type: object
+
 allOf:
+  - $ref: /schemas/cpu.yaml#
   - $ref: /schemas/opp/opp-v1.yaml#
   - if:
       # If the enable-method property contains one of those values
@@ -407,7 +451,7 @@ required:
 dependencies:
   rockchip,pmu: [enable-method]
 
-additionalProperties: true
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml
index 1b59b103dab6..61c080e50859 100644
--- a/Documentation/devicetree/bindings/opp/opp-v1.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -21,6 +21,18 @@ description: |+
 deprecated: true
 
 properties:
+  clock-latency:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The latency in nanoseconds for clock changes. Use OPP tables for new
+      designs instead.
+
+  voltage-tolerance:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 10
+    description:
+      The voltage tolerance in percent. Use OPP tables for new designs instead.
+
   operating-points:
     $ref: /schemas/types.yaml#/definitions/uint32-matrix
     items:
@@ -28,8 +40,12 @@ properties:
         - description: Frequency in kHz
         - description: Voltage for OPP in uV
 
+dependencies:
+  clock-latency: [ operating-points ]
+  voltage-tolerance: [ operating-points ]
 
 additionalProperties: true
+
 examples:
   - |
     cpus {

-- 
2.47.2

[PATCH 18/19] dt-bindings: arm/cpus: Add power-domains constraints

[Rob Herring (Arm)]

The "power-domains" and "power-domains-names" properties are missing any
constraints. Add the constraints and drop the generic descriptions.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/arm/cpus.yaml | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 6f74ebfd38df..5bd5822db8af 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -313,19 +313,15 @@ properties:
     maxItems: 1
 
   power-domains:
-    description:
-      List of phandles and PM domain specifiers, as defined by bindings of the
-      PM domain provider (see also ../power_domain.txt).
+    maxItems: 1
 
   power-domain-names:
     description:
-      A list of power domain name strings sorted in the same order as the
-      power-domains property.
-
       For PSCI based platforms, the name corresponding to the index of the PSCI
       PM domain provider, must be "psci". For SCMI based platforms, the name
       corresponding to the index of an SCMI performance domain provider, must be
       "perf".
+    enum: [ psci, perf, cpr ]
 
   resets:
     maxItems: 1

-- 
2.47.2

[PATCH 19/19] dt-bindings: cpufreq: Drop redundant Mediatek binding

[Rob Herring (Arm)]

The Mediatek CPUFreq binding document just describes properties from
the CPU node which the driver uses. This is redundant as all the
properties are described in the arm/cpus.yaml schema.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../bindings/cpufreq/cpufreq-mediatek.txt          | 250 ---------------------
 1 file changed, 250 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
deleted file mode 100644
index e0a4ba599abc..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ /dev/null
@@ -1,250 +0,0 @@
-Binding for MediaTek's CPUFreq driver
-=====================================
-
-Required properties:
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
-- clock-names: Should contain the following:
-	"cpu"		- The multiplexer for clock input of CPU cluster.
-	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
-			  source (usually MAINPLL) when the original CPU PLL is under
-			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
-	generic clock consumer properties.
-- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
-	for detail.
-- proc-supply: Regulator for Vproc of CPU cluster.
-
-Optional properties:
-- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
-	       needs to do "voltage tracking" to step by step scale up/down Vproc and
-	       Vsram to fit SoC specific needs. When absent, the voltage scaling
-	       flow is handled by hardware, hence no software "voltage tracking" is
-	       needed.
-- mediatek,cci:
-	Used to confirm the link status between cpufreq and mediatek cci. Because
-	cpufreq and mediatek cci could share the same regulator in some MediaTek SoCs.
-	To prevent the issue of high frequency and low voltage, we need to use this
-	property to make sure mediatek cci is ready.
-	For details of mediatek cci, please refer to
-	Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
-- #cooling-cells:
-	For details, please refer to
-	Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
-
-Example 1 (MT7623 SoC):
-
-	cpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-598000000 {
-			opp-hz = /bits/ 64 <598000000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-747500000 {
-			opp-hz = /bits/ 64 <747500000>;
-			opp-microvolt = <1050000>;
-		};
-
-		opp-1040000000 {
-			opp-hz = /bits/ 64 <1040000000>;
-			opp-microvolt = <1150000>;
-		};
-
-		opp-1196000000 {
-			opp-hz = /bits/ 64 <1196000000>;
-			opp-microvolt = <1200000>;
-		};
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1300000>;
-		};
-	};
-
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x0>;
-		clocks = <&infracfg CLK_INFRA_CPUSEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table>;
-		#cooling-cells = <2>;
-	};
-	cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x1>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-	cpu@2 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x2>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-	cpu@3 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a7";
-		reg = <0x3>;
-		operating-points-v2 = <&cpu_opp_table>;
-	};
-
-Example 2 (MT8173 SoC):
-	cpu_opp_table_a: opp_table_a {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-507000000 {
-			opp-hz = /bits/ 64 <507000000>;
-			opp-microvolt = <859000>;
-		};
-
-		opp-702000000 {
-			opp-hz = /bits/ 64 <702000000>;
-			opp-microvolt = <908000>;
-		};
-
-		opp-1001000000 {
-			opp-hz = /bits/ 64 <1001000000>;
-			opp-microvolt = <983000>;
-		};
-
-		opp-1105000000 {
-			opp-hz = /bits/ 64 <1105000000>;
-			opp-microvolt = <1009000>;
-		};
-
-		opp-1183000000 {
-			opp-hz = /bits/ 64 <1183000000>;
-			opp-microvolt = <1028000>;
-		};
-
-		opp-1404000000 {
-			opp-hz = /bits/ 64 <1404000000>;
-			opp-microvolt = <1083000>;
-		};
-
-		opp-1508000000 {
-			opp-hz = /bits/ 64 <1508000000>;
-			opp-microvolt = <1109000>;
-		};
-
-		opp-1573000000 {
-			opp-hz = /bits/ 64 <1573000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cpu_opp_table_b: opp_table_b {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-507000000 {
-			opp-hz = /bits/ 64 <507000000>;
-			opp-microvolt = <828000>;
-		};
-
-		opp-702000000 {
-			opp-hz = /bits/ 64 <702000000>;
-			opp-microvolt = <867000>;
-		};
-
-		opp-1001000000 {
-			opp-hz = /bits/ 64 <1001000000>;
-			opp-microvolt = <927000>;
-		};
-
-		opp-1209000000 {
-			opp-hz = /bits/ 64 <1209000000>;
-			opp-microvolt = <968000>;
-		};
-
-		opp-1404000000 {
-			opp-hz = /bits/ 64 <1007000000>;
-			opp-microvolt = <1028000>;
-		};
-
-		opp-1612000000 {
-			opp-hz = /bits/ 64 <1612000000>;
-			opp-microvolt = <1049000>;
-		};
-
-		opp-1807000000 {
-			opp-hz = /bits/ 64 <1807000000>;
-			opp-microvolt = <1089000>;
-		};
-
-		opp-1989000000 {
-			opp-hz = /bits/ 64 <1989000000>;
-			opp-microvolt = <1125000>;
-		};
-	};
-
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_a>;
-	};
-
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_a>;
-	};
-
-	cpu2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a72";
-		reg = <0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA72SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_b>;
-	};
-
-	cpu3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a72";
-		reg = <0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA72SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-		operating-points-v2 = <&cpu_opp_table_b>;
-	};
-
-	&cpu0 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu1 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu2 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
-
-	&cpu3 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};

-- 
2.47.2

Re: [PATCH 13/19] arm64: dts: amlogic: Drop redundant CPU "clock-latency"

[Neil Armstrong]

On 04/04/2025 04:59, Rob Herring (Arm) wrote:
> The "clock-latency" property is part of the deprecated opp-v1 binding
> and is redundant if the opp-v2 table has equal or larger values in any
> "clock-latency-ns". Add any missing "clock-latency-ns" properties and
> remove "clock-latency".
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts             | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts         | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts             | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts               | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts            | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-g12a.dtsi                   | 1 +
>   arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi             | 2 ++
>   arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi      | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi          | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi       | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts    | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi            | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts        | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi             | 2 ++
>   arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi              | 6 ------
>   arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi              | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi           | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts        | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi             | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts              | 4 ----
>   arch/arm64/boot/dts/amlogic/meson-sm1.dtsi                    | 1 +
>   23 files changed, 6 insertions(+), 92 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> index 9aa36f17ffa2..d0a3b4b9229c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dts
> @@ -267,28 +267,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &ethmac {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
> index 952b8d02e5c2..4353485c6f26 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
> @@ -220,28 +220,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cvbs_vdac_port {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> index 52fbc5103e45..f39fcabc763f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
> @@ -314,28 +314,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cvbs_vdac_port {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> index 5407049d2647..b5bf8ecc91e6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> @@ -407,28 +407,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &clkc_audio {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index 01da83658ae3..5ab460a3e637 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -263,28 +263,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cvbs_vdac_port {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> index 543e70669df5..deee61dbe074 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
> @@ -62,6 +62,7 @@ cpu_opp_table: opp-table {
>   		opp-1000000000 {
>   			opp-hz = /bits/ 64 <1000000000>;
>   			opp-microvolt = <731000>;
> +			clock-latency-ns = <50000>;
>   		};
>   
>   		opp-1200000000 {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
> index adedc1340c78..415248931ab1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-libretech-cc.dts
> @@ -76,42 +76,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &pwm_ab {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
> index 8e9ad1e51d66..8ecb5bd125c1 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
> @@ -14,6 +14,7 @@ cpu_opp_table_0: opp-table-0 {
>   		opp-1000000000 {
>   			opp-hz = /bits/ 64 <1000000000>;
>   			opp-microvolt = <761000>;
> +			clock-latency-ns = <50000>;
>   		};
>   
>   		opp-1200000000 {
> @@ -54,6 +55,7 @@ cpub_opp_table_1: opp-table-1 {
>   		opp-1000000000 {
>   			opp-hz = /bits/ 64 <1000000000>;
>   			opp-microvolt = <731000>;
> +			clock-latency-ns = <50000>;
>   		};
>   
>   		opp-1200000000 {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> index 92e8b26ecccc..39011b645128 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
> @@ -155,42 +155,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &ext_mdio {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> index 54663c55a20e..1b08303c4282 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
> @@ -263,42 +263,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &ethmac {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> index 48650bad230d..fc737499f207 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi
> @@ -51,42 +51,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &pwm_ab {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> index e21831dfceee..d5938a4a6da3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-go-ultra.dts
> @@ -281,42 +281,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   /* RK817 only supports 12.5mV steps, round up the values */
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
> index 7e8964bacfce..3298d59833b6 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid.dtsi
> @@ -227,42 +227,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu_thermal {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> index fc05ecf90714..1e5c6f984945 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
> @@ -259,42 +259,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu_thermal {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
> index 44c23c984034..19cad93a6889 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
> @@ -14,6 +14,7 @@ cpu_opp_table_0: opp-table-0 {
>   		opp-1000000000 {
>   			opp-hz = /bits/ 64 <1000000000>;
>   			opp-microvolt = <731000>;
> +			clock-latency-ns = <50000>;
>   		};
>   
>   		opp-1200000000 {
> @@ -59,6 +60,7 @@ cpub_opp_table_1: opp-table-1 {
>   		opp-1000000000 {
>   			opp-hz = /bits/ 64 <1000000000>;
>   			opp-microvolt = <771000>;
> +			clock-latency-ns = <50000>;
>   		};
>   
>   		opp-1200000000 {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> index a7a0fc264cdc..9b6d780eada7 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
> @@ -213,42 +213,36 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table_0>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu100 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu101 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu102 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu103 {
>   	cpu-supply = <&vddcpu_a>;
>   	operating-points-v2 = <&cpub_opp_table_1>;
>   	clocks = <&clkc CLKID_CPUB_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cvbs_vdac_port {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
> index a3463149db3d..9be3084b090d 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
> @@ -147,28 +147,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU1_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU2_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU3_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cvbs_vdac_port {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> index 40db95f64636..538b35036954 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
> @@ -185,28 +185,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU1_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU2_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU3_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &ext_mdio {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> index 5d75ad3f3e46..a3d9b66b6878 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
> @@ -51,28 +51,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU1_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU2_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU3_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &pwm_AO_cd {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index ad8d07883760..c4524eb4f099 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -250,28 +250,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU1_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU2_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU3_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &ext_mdio {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
> index 537370db360f..5daadfb170b4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-s905d3-libretech-cc.dts
> @@ -64,26 +64,22 @@ &cpu0 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU1_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU2_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu_b>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU3_CLK>;
> -	clock-latency = <50000>;
>   };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 37d7f64b6d5d..024d2eb8e6ee 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -359,28 +359,24 @@ &cpu0 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu1 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU1_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu2 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU2_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &cpu3 {
>   	cpu-supply = <&vddcpu>;
>   	operating-points-v2 = <&cpu_opp_table>;
>   	clocks = <&clkc CLKID_CPU3_CLK>;
> -	clock-latency = <50000>;
>   };
>   
>   &ethmac {
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> index 97e4b52066dc..966ebb19cc55 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> @@ -100,6 +100,7 @@ cpu_opp_table: opp-table {
>   		opp-1000000000 {
>   			opp-hz = /bits/ 64 <1000000000>;
>   			opp-microvolt = <770000>;
> +			clock-latency-ns = <50000>;
>   		};
>   
>   		opp-1200000000 {
> 

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Re: [PATCH 04/19] arm64: dts: microchip: sparx5: Fix CPU node "enable-method" property dependencies

[Daniel Machon]

> The "spin-table" enable-method requires "cpu-release-addr" property,
> so add a dummy entry. It is assumed the bootloader will fill in the
> correct values.
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
>  arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
> index 32bb76b3202a..83bf5c81b5f7 100644
> --- a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
> +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
> @@ -12,10 +12,12 @@ &psci {
> 
>  &cpu0 {
>         enable-method = "spin-table";
> +       cpu-release-addr = /bits/ 64 <0>;
>  };
> 
>  &cpu1 {
>         enable-method = "spin-table";
> +       cpu-release-addr = /bits/ 64 <0>;
>  };
> 
>  &uart0 {
> 
> --
> 2.47.2
>

Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Tested-by: Daniel Machon <daniel.machon@microchip.com>
 

Re: [PATCH 17/19] dt-bindings: arm/cpus: Add missing properties

[AngeloGioacchino Del Regno]

Il 04/04/25 04:59, Rob Herring (Arm) ha scritto:
> The Arm CPU schema is missing a number of properties already in use.
> This has gone unnoticed as extra properties have not been restricted.
> Add a missing reference to cpu.yaml, and add all the missing properties.
> 
> As "clock-latency" and "voltage-tolerance" are related to opp-v1, add
> those properties to the opp-v1.yaml schema.
> 
> With this, other properties can be prevented from creeping in with
> 'unevaluatedProperties: false'.
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
>   Documentation/devicetree/bindings/arm/cpus.yaml   | 46 ++++++++++++++++++++++-
>   Documentation/devicetree/bindings/opp/opp-v1.yaml | 16 ++++++++
>   2 files changed, 61 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
> index 3d2b6286efb8..6f74ebfd38df 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.yaml
> +++ b/Documentation/devicetree/bindings/arm/cpus.yaml
> @@ -299,6 +299,16 @@ properties:
>   
>         where voltage is in V, frequency is in MHz.
>   
> +  interconnects:
> +    minItems: 1
> +    maxItems: 2
> +
> +  nvmem-cells:
> +    maxItems: 1
> +
> +  nvmem-cell-names:
> +    const: speed_grade
> +
>     performance-domains:
>       maxItems: 1
>   
> @@ -317,6 +327,31 @@ properties:
>         corresponding to the index of an SCMI performance domain provider, must be
>         "perf".
>   
> +  resets:
> +    maxItems: 1
> +
> +  arm-supply:
> +    deprecated: true
> +    description: Use 'cpu-supply' instead
> +
> +  cpu0-supply:
> +    deprecated: true
> +    description: Use 'cpu-supply' instead
> +
> +  mem-supply: true
> +
> +  proc-supply:
> +    deprecated: true
> +    description: Use 'cpu-supply' instead
> +
> +  sram-supply:
> +    deprecated: true
> +    description: Use 'mem-supply' instead
> +
> +  mediatek,cci:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description: Link to Mediatek Cache Coherent Interconnect

s/Mediatek/MediaTek/g please :-)

Anyway:
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH 16/19] dt-bindings: Reference opp-v1 schema in CPU schemas

[AngeloGioacchino Del Regno]

Il 04/04/25 04:59, Rob Herring (Arm) ha scritto:
> The opp-v1 binding is only used in MIPS and arm32 CPU nodes, so add a
> $ref to it in the CPU schemas and drop the "select".
> 
> As opp-v1 has long been deprecated, mark it as such.
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

ARM//MediaTek:
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH 19/19] dt-bindings: cpufreq: Drop redundant Mediatek binding

[AngeloGioacchino Del Regno]

Il 04/04/25 04:59, Rob Herring (Arm) ha scritto:
> The Mediatek CPUFreq binding document just describes properties from
> the CPU node which the driver uses. This is redundant as all the
> properties are described in the arm/cpus.yaml schema.
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH 18/19] dt-bindings: arm/cpus: Add power-domains constraints

[AngeloGioacchino Del Regno]

Il 04/04/25 04:59, Rob Herring (Arm) ha scritto:
> The "power-domains" and "power-domains-names" properties are missing any
> constraints. Add the constraints and drop the generic descriptions.
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

For MediaTek:
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH 00/19] Arm cpu schema clean-ups

[Viresh Kumar]

On 03-04-25, 21:59, Rob Herring (Arm) wrote:
>  .../bindings/cpufreq/cpufreq-mediatek.txt          | 250 ---------------------
>  Documentation/devicetree/bindings/opp/opp-v1.yaml  |  18 +-

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh

Re: [PATCH 01/19] arm64: dts: allwinner: h5/h6: Drop spurious 'clock-latency-ns' properties

[Jernej Škrabec]

Dne petek, 4. april 2025 ob 04:59:22 Srednjeevropski poletni čas je Rob Herring (Arm) napisal(a):
> 'clock-latency-ns' is not a valid property for CPU nodes. It belongs in
> OPP table (which has it). Drop them from the CPU nodes.
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej

Re: [PATCH 00/19] Arm cpu schema clean-ups

[Rob Herring]

On Tue, Apr 8, 2025 at 12:57 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> On 03-04-25, 21:59, Rob Herring (Arm) wrote:
> >  .../bindings/cpufreq/cpufreq-mediatek.txt          | 250 ---------------------
> >  Documentation/devicetree/bindings/opp/opp-v1.yaml  |  18 +-
>
> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

In the future, please consider acking the 2 patches rather than the
cover letter because 'b4 trailers' thinks you acked everything.

Rob

Re: [PATCH 10/19] arm/arm64: dts: imx: Drop redundant CPU "clock-latency"

[Shawn Guo]

On Thu, Apr 03, 2025 at 09:59:31PM -0500, Rob Herring (Arm) wrote:
> The "clock-latency" property is part of the deprecated opp-v1 binding
> and is redundant if the opp-v2 table has equal or larger values in any
> "clock-latency-ns". The OPP tables have values of 150000, so it can be
> removed.
> 
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
>  arch/arm/boot/dts/nxp/imx/imx7s.dtsi      | 1 -
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi | 4 ----
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi | 4 ----
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 4 ----
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ----
>  5 files changed, 17 deletions(-)

Applied as two patches, one for imx/dt branch and the other for imx/dt64.

Shawn