* [PATCH] dt-bindings: timer: Convert socionext,milbeaut-timer to DT schema
@ 2025-05-06 2:23 Rob Herring (Arm)
2025-05-15 8:28 ` Daniel Lezcano
0 siblings, 1 reply; 2+ messages in thread
From: Rob Herring (Arm) @ 2025-05-06 2:23 UTC (permalink / raw)
To: Daniel Lezcano, Thomas Gleixner, Krzysztof Kozlowski,
Conor Dooley, Taichi Sugaya, Takao Orito
Cc: linux-kernel, devicetree, linux-arm-kernel
Convert the Socionext Milbeaut Timer binding to DT schema format.
It's a straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
.../timer/socionext,milbeaut-timer.txt | 17 --------
.../timer/socionext,milbeaut-timer.yaml | 40 +++++++++++++++++++
2 files changed, 40 insertions(+), 17 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
create mode 100644 Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt b/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
deleted file mode 100644
index ac44c4b67530..000000000000
--- a/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Milbeaut SoCs Timer Controller
-
-Required properties:
-
-- compatible : should be "socionext,milbeaut-timer".
-- reg : Specifies base physical address and size of the registers.
-- interrupts : The interrupt of the first timer.
-- clocks: phandle to the input clk.
-
-Example:
-
-timer {
- compatible = "socionext,milbeaut-timer";
- reg = <0x1e000050 0x20>
- interrupts = <0 91 4>;
- clocks = <&clk 4>;
-};
diff --git a/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.yaml b/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.yaml
new file mode 100644
index 000000000000..9ab72b762314
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/socionext,milbeaut-timer.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/socionext,milbeaut-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Milbeaut SoCs Timer Controller
+
+maintainers:
+ - Sugaya Taichi <sugaya.taichi@socionext.com>
+
+properties:
+ compatible:
+ const: socionext,milbeaut-timer
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ timer@1e000050 {
+ compatible = "socionext,milbeaut-timer";
+ reg = <0x1e000050 0x20>;
+ interrupts = <0 91 4>;
+ clocks = <&clk 4>;
+ };
--
2.47.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] dt-bindings: timer: Convert socionext,milbeaut-timer to DT schema
2025-05-06 2:23 [PATCH] dt-bindings: timer: Convert socionext,milbeaut-timer to DT schema Rob Herring (Arm)
@ 2025-05-15 8:28 ` Daniel Lezcano
0 siblings, 0 replies; 2+ messages in thread
From: Daniel Lezcano @ 2025-05-15 8:28 UTC (permalink / raw)
To: Rob Herring (Arm)
Cc: Thomas Gleixner, Krzysztof Kozlowski, Conor Dooley, Taichi Sugaya,
Takao Orito, linux-kernel, devicetree, linux-arm-kernel
On Mon, May 05, 2025 at 09:23:20PM -0500, Rob Herring wrote:
> Convert the Socionext Milbeaut Timer binding to DT schema format.
> It's a straight-forward conversion.
>
> Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
> ---
Applied, thanks
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2025-05-15 8:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-05-06 2:23 [PATCH] dt-bindings: timer: Convert socionext,milbeaut-timer to DT schema Rob Herring (Arm)
2025-05-15 8:28 ` Daniel Lezcano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).