From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sean Wang <sean.wang@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
Benjamin Larsson <benjamin.larsson@genexis.eu>,
linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, stable@vger.kernel.org
Subject: Re: [PATCH 1/6] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46
Date: Wed, 28 May 2025 09:16:04 +0200 [thread overview]
Message-ID: <aDa4NCTzyzw0mnfE@lore-desk> (raw)
In-Reply-To: <20250527222040.32000-2-ansuelsmth@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2465 bytes --]
> In all the MUX value for LED1 GPIO46 there is a Copy-Paste error where
> the MUX value is set to LED0_MODE_MASK instead of LED1_MODE_MASK.
>
> This wasn't notice as there were no board that made use of the
> secondary PHY LED but looking at the internal Documentation the actual
> value should be LED1_MODE_MASK similar to the other GPIO entry.
>
> Fix the wrong value to apply the correct MUX configuration.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
>
> Cc: stable@vger.kernel.org
> Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
> ---
> drivers/pinctrl/mediatek/pinctrl-airoha.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-airoha.c b/drivers/pinctrl/mediatek/pinctrl-airoha.c
> index b97b28ebb37a..8ef7f88477aa 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-airoha.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c
> @@ -1752,8 +1752,8 @@ static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> @@ -1816,8 +1816,8 @@ static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> @@ -1880,8 +1880,8 @@ static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> @@ -1944,8 +1944,8 @@ static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
> .regmap[0] = {
> AIROHA_FUNC_MUX,
> REG_GPIO_2ND_I2C_MODE,
> - GPIO_LAN3_LED0_MODE_MASK,
> - GPIO_LAN3_LED0_MODE_MASK
> + GPIO_LAN3_LED1_MODE_MASK,
> + GPIO_LAN3_LED1_MODE_MASK
> },
> .regmap[1] = {
> AIROHA_FUNC_MUX,
> --
> 2.48.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
next prev parent reply other threads:[~2025-05-28 7:20 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-27 22:20 [PATCH 0/6] pinctrl: Add Airoha AN7583 support Christian Marangi
2025-05-27 22:20 ` [PATCH 1/6] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46 Christian Marangi
2025-05-28 7:16 ` Lorenzo Bianconi [this message]
2025-05-27 22:20 ` [PATCH 2/6] pinctrl: mediatek: airoha: generalize pins/group/function/confs handling Christian Marangi
2025-05-28 8:07 ` Lorenzo Bianconi
2025-05-31 13:29 ` Christian Marangi
2025-05-27 22:20 ` [PATCH 3/6] pinctrl: airoha: convert PHY LED GPIO to macro Christian Marangi
2025-05-28 8:21 ` Lorenzo Bianconi
2025-05-27 22:20 ` [PATCH 4/6] pinctrl: airoha: convert PWM " Christian Marangi
2025-05-28 8:22 ` Lorenzo Bianconi
2025-05-27 22:20 ` [PATCH 5/6] dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller Christian Marangi
2025-06-05 19:55 ` Rob Herring
2025-05-27 22:20 ` [PATCH 6/6] pinctrl: airoha: add support for Airoha AN7583 PINs Christian Marangi
2025-05-28 9:20 ` Benjamin Larsson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aDa4NCTzyzw0mnfE@lore-desk \
--to=lorenzo@kernel.org \
--cc=angelogioacchino.delregno@collabora.com \
--cc=ansuelsmth@gmail.com \
--cc=benjamin.larsson@genexis.eu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=sean.wang@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).