linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Geraldo Nascimento <geraldogabriel@gmail.com>
To: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: linux-rockchip@lists.infradead.org,
	"Shawn Lin" <shawn.lin@rock-chips.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Manivannan Sadhasivam" <mani@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	linux-phy@lists.infradead.org, linux-pci@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH v4 2/5] PCI: rockchip: Drop unused custom registers and bitfields
Date: Fri, 13 Jun 2025 12:19:20 -0300	[thread overview]
Message-ID: <aExBeNdkOtFtW87z@geday> (raw)
In-Reply-To: <97114c68-5eb7-18b0-adbd-227e1d7957c6@linux.intel.com>

On Fri, Jun 13, 2025 at 06:03:14PM +0300, Ilpo Järvinen wrote:
> On Fri, 13 Jun 2025, Geraldo Nascimento wrote:
> 
> > Since we are now using standard PCIe defines, drop
> > unused custom-defined ones, which are now referenced
> > from offset at added Capabilities Register.
> 
> These are quite short lines, please reflow the changelog paragraphs to the 
> usual length.

Hi Ilpo,

I'll reflow for v5.

> 
> > Suggested-By: Bjorn Helgaas <bhelgaas@google.com>
> > Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
> > ---
> >  drivers/pci/controller/pcie-rockchip.h | 11 +----------
> >  1 file changed, 1 insertion(+), 10 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/pcie-rockchip.h b/drivers/pci/controller/pcie-rockchip.h
> > index 5864a20323f2..f611599988d7 100644
> > --- a/drivers/pci/controller/pcie-rockchip.h
> > +++ b/drivers/pci/controller/pcie-rockchip.h
> > @@ -155,16 +155,7 @@
> >  #define PCIE_EP_CONFIG_DID_VID		(PCIE_EP_CONFIG_BASE + 0x00)
> >  #define PCIE_EP_CONFIG_LCS		(PCIE_EP_CONFIG_BASE + 0xd0)
> >  #define PCIE_RC_CONFIG_RID_CCR		(PCIE_RC_CONFIG_BASE + 0x08)
> > -#define PCIE_RC_CONFIG_DCR		(PCIE_RC_CONFIG_BASE + 0xc4)
> > -#define   PCIE_RC_CONFIG_DCR_CSPL_SHIFT		18
> > -#define   PCIE_RC_CONFIG_DCR_CSPL_LIMIT		0xff
> > -#define   PCIE_RC_CONFIG_DCR_CPLS_SHIFT		26
> > -#define PCIE_RC_CONFIG_DCSR		(PCIE_RC_CONFIG_BASE + 0xc8)
> > -#define   PCIE_RC_CONFIG_DCSR_MPS_MASK		GENMASK(7, 5)
> > -#define   PCIE_RC_CONFIG_DCSR_MPS_256		(0x1 << 5)
> > -#define PCIE_RC_CONFIG_LINK_CAP		(PCIE_RC_CONFIG_BASE + 0xcc)
> > -#define   PCIE_RC_CONFIG_LINK_CAP_L0S		BIT(10)
> > -#define PCIE_RC_CONFIG_LCS		(PCIE_RC_CONFIG_BASE + 0xd0)
> > +#define PCIE_RC_CONFIG_CR		(PCIE_RC_CONFIG_BASE + 0xc0)
> 
> This will cause a build failure because PCIE_RC_CONFIG_CR is used in 1/5 
> but only introduced here so you'll need to do this in the same patch as 
> any step within a series must build too. IMO it would anyway make sense to 
> combine patches 1 & 2.

Ah, interesting angle. I'll fix it.

> 
> >  #define PCIE_EP_CONFIG_LCS		(PCIE_EP_CONFIG_BASE + 0xd0)
> 
> Aren't you going to convert this as well?

I can, but I can't test it however! But I'll Cc: someone who hopefully
can.

Thanks,
Geraldo Nascimento
> 
> >  #define PCIE_RC_CONFIG_L1_SUBSTATE_CTRL2 (PCIE_RC_CONFIG_BASE + 0x90c)
> >  #define PCIE_RC_CONFIG_THP_CAP		(PCIE_RC_CONFIG_BASE + 0x274)
> > 
> 
> -- 
>  i.
> 


  reply	other threads:[~2025-06-13 16:42 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1749826250.git.geraldogabriel@gmail.com>
2025-06-13 14:51 ` [RFC PATCH v4 1/5] PCI: rockchip: Use standard PCIe defines Geraldo Nascimento
2025-06-13 14:51 ` [RFC PATCH v4 2/5] PCI: rockchip: Drop unused custom registers and bitfields Geraldo Nascimento
2025-06-13 15:03   ` Ilpo Järvinen
2025-06-13 15:19     ` Geraldo Nascimento [this message]
2025-06-13 15:25       ` Ilpo Järvinen
2025-06-13 14:51 ` [RFC PATCH v4 3/5] PCI: rockchip: Set Target Link Speed before retraining Geraldo Nascimento
2025-06-13 14:51 ` [RFC PATCH v4 4/5] phy: rockchip-pcie: Enable all four lanes Geraldo Nascimento
2025-06-13 14:52 ` [RFC PATCH v4 5/5] phy: rockchip-pcie: Adjust read mask and write Geraldo Nascimento

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aExBeNdkOtFtW87z@geday \
    --to=geraldogabriel@gmail.com \
    --cc=bhelgaas@google.com \
    --cc=heiko@sntech.de \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=kishon@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=mani@kernel.org \
    --cc=robh@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).