From: Yeoreum Yun <yeoreum.yun@arm.com>
To: Leo Yan <leo.yan@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>,
Mike Leach <mike.leach@linaro.org>,
James Clark <james.clark@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alexander Shishkin <alexander.shishkin@linux.intel.com>,
Yabin Cui <yabinc@google.com>, Keita Morisaki <keyz@google.com>,
Yuanfang Zhang <quic_yuanfang@quicinc.com>,
coresight@lists.linaro.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 04/28] coresight: etm4x: Correct polling IDLE bit
Date: Wed, 2 Jul 2025 11:24:55 +0100 [thread overview]
Message-ID: <aGUI977Tj9DzKYrb@e129823.arm.com> (raw)
In-Reply-To: <20250701-arm_cs_pm_fix_v3-v2-4-23ebb864fcc1@arm.com>
LGTM.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
> Since commit 4ff6039ffb79 ("coresight-etm4x: add isb() before reading
> the TRCSTATR"), the code has incorrectly been polling the PMSTABLE bit
> instead of the IDLE bit.
>
> This commit corrects the typo.
>
> Fixes: 4ff6039ffb79 ("coresight-etm4x: add isb() before reading the TRCSTATR")
> Signed-off-by: Leo Yan <leo.yan@arm.com>
> ---
> drivers/hwtracing/coresight/coresight-etm4x-core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> index ee405c88ea5faa130819f96b00b8307f8764d58a..0f2a8b8459c93ca29d270b6fa05928244e0761c5 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> @@ -1921,7 +1921,7 @@ static int __etm4_cpu_save(struct etmv4_drvdata *drvdata)
> state->trcpdcr = etm4x_read32(csa, TRCPDCR);
>
> /* wait for TRCSTATR.IDLE to go up */
> - if (etm4x_wait_status(csa, TRCSTATR_PMSTABLE_BIT, 1)) {
> + if (etm4x_wait_status(csa, TRCSTATR_IDLE_BIT, 1)) {
> dev_err(etm_dev,
> "timeout while waiting for Idle Trace Status\n");
> etm4_os_unlock(drvdata);
>
> --
> 2.34.1
>
--
Sincerely,
Yeoreum Yun
next prev parent reply other threads:[~2025-07-02 11:12 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-01 14:53 [PATCH v2 00/28] CoreSight: Address CPU Power Management Issues Leo Yan
2025-07-01 14:53 ` [PATCH v2 01/28] coresight: Change device mode to atomic type Leo Yan
2025-07-02 9:49 ` Yeoreum Yun
2025-07-02 10:38 ` Leo Yan
2025-07-02 16:35 ` Yeoreum Yun
2025-07-15 6:53 ` Anshuman Khandual
2025-08-04 8:22 ` Leo Yan
2025-07-01 14:53 ` [PATCH v2 02/28] coresight: etm4x: Always set tracer's device mode on target CPU Leo Yan
2025-07-02 10:14 ` Yeoreum Yun
2025-07-15 7:26 ` Anshuman Khandual
2025-08-04 9:08 ` Leo Yan
2025-08-21 9:45 ` James Clark
2025-08-21 12:51 ` Leo Yan
2025-07-01 14:53 ` [PATCH v2 03/28] coresight: etm3x: " Leo Yan
2025-07-02 3:04 ` kernel test robot
2025-07-02 4:08 ` kernel test robot
2025-07-02 10:18 ` Yeoreum Yun
2025-07-02 10:42 ` Leo Yan
2025-07-01 14:53 ` [PATCH v2 04/28] coresight: etm4x: Correct polling IDLE bit Leo Yan
2025-07-02 10:24 ` Yeoreum Yun [this message]
2025-07-01 14:53 ` [PATCH v2 05/28] coresight: etm4x: Ensure context synchronization is not ignored Leo Yan
2025-07-02 11:10 ` Yeoreum Yun
2025-07-02 14:35 ` Leo Yan
2025-07-01 14:53 ` [PATCH v2 06/28] coresight: etm4x: Add context synchronization before enabling trace Leo Yan
2025-07-02 11:05 ` Yeoreum Yun
2025-07-02 14:40 ` Leo Yan
2025-07-02 16:21 ` Yeoreum Yun
2025-07-01 14:53 ` [PATCH v2 07/28] coresight: etm4x: Properly control filter in CPU idle with FEAT_TRF Leo Yan
2025-07-01 14:53 ` [PATCH v2 08/28] coresight: etm4x: Remove the state_needs_restore flag Leo Yan
2025-07-02 11:19 ` Yeoreum Yun
2025-07-01 14:53 ` [PATCH v2 09/28] coresight: etm4x: Add flag to control single-shot restart Leo Yan
2025-07-01 14:53 ` [PATCH v2 10/28] coresight: etm4x: Reuse normal enable and disable logic in CPU idle Leo Yan
2025-07-01 14:53 ` [PATCH v2 11/28] coresight: Populate CPU ID into the coresight_device structure Leo Yan
2025-07-02 6:34 ` kernel test robot
2025-07-01 14:53 ` [PATCH v2 12/28] coresight: sysfs: Validate CPU online status for per-CPU sources Leo Yan
2025-07-02 12:55 ` Yeoreum Yun
2025-07-01 14:53 ` [PATCH v2 13/28] coresight: Set per CPU source pointer Leo Yan
2025-07-01 14:53 ` [PATCH v2 14/28] coresight: Register CPU PM notifier in core layer Leo Yan
2025-07-01 14:53 ` [PATCH v2 15/28] coresight: etm4x: Hook CPU PM callbacks Leo Yan
2025-07-01 14:53 ` [PATCH v2 16/28] coresight: Add callback to determine if context save/restore is needed Leo Yan
2025-07-01 14:53 ` [PATCH v2 17/28] coresight: etm4x: Remove redundant condition checks in save and restore Leo Yan
2025-07-01 14:53 ` [PATCH v2 18/28] coresight: cti: Fix race condition by using device mode Leo Yan
2025-07-01 14:53 ` [PATCH v2 19/28] coresight: cti: Introduce CS_MODE_DEBUG mode Leo Yan
2025-07-01 14:53 ` [PATCH v2 20/28] coresight: cti: Properly handle modes in CPU PM notifiers Leo Yan
2025-07-01 14:53 ` [PATCH v2 21/28] coresight: Add per-CPU path pointer Leo Yan
2025-07-01 14:53 ` [PATCH v2 22/28] coresight: Add 'in_idle' argument to path enable/disable functions Leo Yan
2025-07-01 14:53 ` [PATCH v2 23/28] coresight: Control path during CPU idle Leo Yan
2025-07-01 14:53 ` [PATCH v2 24/28] coresight: Add PM callbacks for percpu sink Leo Yan
2025-07-01 14:53 ` [PATCH v2 25/28] coresight: trbe: Save and restore state across CPU low power state Leo Yan
2025-09-04 13:15 ` James Clark
2025-07-01 14:53 ` [PATCH v2 26/28] coresight: Take hotplug lock in enable_source_store() for Sysfs mode Leo Yan
2025-07-01 14:53 ` [PATCH v2 27/28] coresight: Move CPU hotplug callbacks to core layer Leo Yan
2025-07-01 14:53 ` [PATCH v2 28/28] coresight: Manage activated path during CPU hotplug Leo Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aGUI977Tj9DzKYrb@e129823.arm.com \
--to=yeoreum.yun@arm.com \
--cc=alexander.shishkin@linux.intel.com \
--cc=coresight@lists.linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=james.clark@linaro.org \
--cc=keyz@google.com \
--cc=leo.yan@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mike.leach@linaro.org \
--cc=quic_yuanfang@quicinc.com \
--cc=suzuki.poulose@arm.com \
--cc=yabinc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).