* [PATCH v3 01/13] ARM: dts: aspeed: wedge400: Fix DTB warnings
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
@ 2025-07-23 23:29 ` rentao.bupt
2025-07-23 23:29 ` [PATCH v3 02/13] ARM: dts: aspeed: fuji: " rentao.bupt
` (13 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:29 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Fix the deprecated spi-gpio properties in wedge400 dts.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None.
Changes in v2:
- None (the patch is introduced in v2).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index 5a8169bbda87..3e4d30f0884d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -75,9 +75,9 @@ spi_gpio: spi {
#size-cells = <0>;
cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
- gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+ sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
num-chipselects = <1>;
tpm@0 {
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 02/13] ARM: dts: aspeed: fuji: Fix DTB warnings
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
2025-07-23 23:29 ` [PATCH v3 01/13] ARM: dts: aspeed: wedge400: Fix DTB warnings rentao.bupt
@ 2025-07-23 23:29 ` rentao.bupt
2025-07-23 23:29 ` [PATCH v3 03/13] ARM: dts: aspeed: Fix DTB warnings in ast2600-facebook-netbmc-common.dtsi rentao.bupt
` (12 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:29 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Remove redundant adm1278 properties from fuji dts.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None.
Changes in v2:
- None (the patch is introduced in v2).
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
index f23c26a3441d..840d19d6b1d4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -248,8 +248,6 @@ imux16: i2c@0 {
adm1278@10 {
compatible = "adi,adm1278";
reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
shunt-resistor-micro-ohms = <1500>;
};
};
@@ -577,8 +575,6 @@ imux67: i2c@3 {
adm1278@10 {
compatible = "adi,adm1278";
reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
shunt-resistor-micro-ohms = <250>;
};
};
@@ -648,8 +644,6 @@ imux75: i2c@3 {
adm1278@10 {
compatible = "adi,adm1278";
reg = <0x10>;
- #address-cells = <1>;
- #size-cells = <0>;
shunt-resistor-micro-ohms = <250>;
};
};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 03/13] ARM: dts: aspeed: Fix DTB warnings in ast2600-facebook-netbmc-common.dtsi
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
2025-07-23 23:29 ` [PATCH v3 01/13] ARM: dts: aspeed: wedge400: Fix DTB warnings rentao.bupt
2025-07-23 23:29 ` [PATCH v3 02/13] ARM: dts: aspeed: fuji: " rentao.bupt
@ 2025-07-23 23:29 ` rentao.bupt
2025-07-23 23:30 ` [PATCH v3 04/13] ARM: dts: aspeed: Move eMMC out of ast2600-facebook-netbmc-common.dtsi rentao.bupt
` (11 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:29 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Fix deprecated spi-gpio properties in ast2600-facebook-netbmc-common.dtsi.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None.
Changes in v2:
- None (the patch is introduced in v2).
.../dts/aspeed/ast2600-facebook-netbmc-common.dtsi | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 00e5887c926f..208cf6567ed4 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -31,9 +31,13 @@ spi_gpio: spi {
#address-cells = <1>;
#size-cells = <0>;
- gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+ /*
+ * chipselect pins are defined in platform .dts files
+ * separately.
+ */
+ sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 04/13] ARM: dts: aspeed: Move eMMC out of ast2600-facebook-netbmc-common.dtsi
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (2 preceding siblings ...)
2025-07-23 23:29 ` [PATCH v3 03/13] ARM: dts: aspeed: Fix DTB warnings in ast2600-facebook-netbmc-common.dtsi rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-23 23:30 ` [PATCH v3 05/13] ARM: dts: aspeed: Add facebook-bmc-flash-layout-128-data64.dtsi rentao.bupt
` (10 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Move eMMC entries from ast2600-facebook-netbmc-common.dtsi to each
platform because eMMC is removed from future Meta/Facebook AST2600
Network BMC platforms.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None.
Changes in v2:
- The 3 emmc-related patches in v1 are squashed into this patch.
.../boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts | 12 ++++++++++++
.../arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts | 12 ++++++++++++
.../dts/aspeed/ast2600-facebook-netbmc-common.dtsi | 12 ------------
3 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
index 74f3c67e0eff..ff1009ea1c49 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -201,3 +201,15 @@ fixed-link {
full-duplex;
};
};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
index 840d19d6b1d4..d0331980d082 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -1243,3 +1243,15 @@ &mac3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgmii4_default>;
};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 208cf6567ed4..0ef225acddfc 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -156,18 +156,6 @@ &vhub {
status = "okay";
};
-&emmc_controller {
- status = "okay";
-};
-
-&emmc {
- status = "okay";
-
- non-removable;
- max-frequency = <25000000>;
- bus-width = <4>;
-};
-
&rtc {
status = "okay";
};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 05/13] ARM: dts: aspeed: Add facebook-bmc-flash-layout-128-data64.dtsi
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (3 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 04/13] ARM: dts: aspeed: Move eMMC out of ast2600-facebook-netbmc-common.dtsi rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-23 23:30 ` [PATCH v3 06/13] dt-bindings: arm: aspeed: add Facebook Wedge400-data64 board rentao.bupt
` (9 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Add facebook-bmc-flash-layout-128-data64.dts (with 64MB datastore) to be
used by Meta Network BMC platforms.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None.
Changes in v2:
- None (the patch is introduced in v2 per Andrew's suggestion).
.../facebook-bmc-flash-layout-128-data64.dtsi | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 000000000000..efd92232cda2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /*
+ * u-boot partition: 896KB.
+ */
+ u-boot@0 {
+ reg = <0x0 0xe0000>;
+ label = "u-boot";
+ };
+
+ /*
+ * u-boot environment variables: 64KB.
+ */
+ u-boot-env@e0000 {
+ reg = <0xe0000 0x10000>;
+ label = "env";
+ };
+
+ /*
+ * image metadata partition (64KB), used by Facebook internal
+ * tools.
+ */
+ image-meta@f0000 {
+ reg = <0xf0000 0x10000>;
+ label = "meta";
+ };
+
+ /*
+ * FIT image: 63 MB.
+ */
+ fit@100000 {
+ reg = <0x100000 0x3f00000>;
+ label = "fit";
+ };
+
+ /*
+ * "data0" partition (64MB) is used by Facebook BMC platforms as
+ * persistent data store.
+ */
+ data0@4000000 {
+ reg = <0x4000000 0x4000000>;
+ label = "data0";
+ };
+
+ /*
+ * Although the master partition can be created by enabling
+ * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+ * explicitly created to avoid breaking legacy applications.
+ */
+ flash0@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash0";
+ };
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 06/13] dt-bindings: arm: aspeed: add Facebook Wedge400-data64 board
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (4 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 05/13] ARM: dts: aspeed: Add facebook-bmc-flash-layout-128-data64.dtsi rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-24 10:03 ` Krzysztof Kozlowski
2025-07-23 23:30 ` [PATCH v3 07/13] ARM: dts: aspeed: Add Facebook Wedge400-data64 (AST2500) BMC rentao.bupt
` (8 subsequent siblings)
14 siblings, 1 reply; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Document the new compatibles used on Meta/Facebook Wedge400-data64
board.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None (the patch is introduced in v3).
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 01333ac111fb..0c9d6a30dce0 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -46,6 +46,7 @@ properties:
- facebook,yamp-bmc
- facebook,yosemitev2-bmc
- facebook,wedge400-bmc
+ - facebook,wedge400-data64-bmc
- hxt,stardragon4800-rep2-bmc
- ibm,mihawk-bmc
- ibm,mowgli-bmc
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v3 06/13] dt-bindings: arm: aspeed: add Facebook Wedge400-data64 board
2025-07-23 23:30 ` [PATCH v3 06/13] dt-bindings: arm: aspeed: add Facebook Wedge400-data64 board rentao.bupt
@ 2025-07-24 10:03 ` Krzysztof Kozlowski
0 siblings, 0 replies; 26+ messages in thread
From: Krzysztof Kozlowski @ 2025-07-24 10:03 UTC (permalink / raw)
To: rentao.bupt, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Joel Stanley, Andrew Jeffery, devicetree, linux-arm-kernel,
linux-aspeed, linux-kernel, Andrew Lunn, Tao Ren
On 24/07/2025 01:30, rentao.bupt@gmail.com wrote:
> From: Tao Ren <rentao.bupt@gmail.com>
>
> Document the new compatibles used on Meta/Facebook Wedge400-data64
> board.
>
> Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 07/13] ARM: dts: aspeed: Add Facebook Wedge400-data64 (AST2500) BMC
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (5 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 06/13] dt-bindings: arm: aspeed: add Facebook Wedge400-data64 board rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-24 8:05 ` Krzysztof Kozlowski
2025-07-23 23:30 ` [PATCH v3 08/13] ARM: dts: aspeed: wedge400: Include wedge400-data64.dts rentao.bupt
` (7 subsequent siblings)
14 siblings, 1 reply; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Add wedge400-data64.dts to extend wedge400's data0 partition from 8MB to
64MB smoothly.
wedge400-data64.dts is copied from wedge400.dts with below changes:
- updating model/compatible strings.
- updating BMC flash layout.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None (the patch is introduced in v3).
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed-bmc-facebook-wedge400-data64.dts | 376 ++++++++++++++++++
2 files changed, 377 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 2e5f4833a073..55be25acfc80 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -30,6 +30,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-facebook-wedge40.dtb \
aspeed-bmc-facebook-wedge100.dtb \
+ aspeed-bmc-facebook-wedge400-data64.dtb \
aspeed-bmc-facebook-wedge400.dtb \
aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-facebook-yosemitev2.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..5b23842f26a3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Wedge 400 BMC (64MB Datastore)";
+ compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+ aliases {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (11-0076) provides 8 channels connecting to
+ * FCM (Fan Controller Module).
+ */
+ i2c32 = &imux32;
+ i2c33 = &imux33;
+ i2c34 = &imux34;
+ i2c35 = &imux35;
+ i2c36 = &imux36;
+ i2c37 = &imux37;
+ i2c38 = &imux38;
+ i2c39 = &imux39;
+
+ spi2 = &spi_gpio;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+ };
+
+ ast-adc-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+ };
+
+ /*
+ * GPIO-based SPI Master is required to access SPI TPM, because
+ * full-duplex SPI transactions are not supported by ASPEED SPI
+ * Controllers.
+ */
+ spi_gpio: spi {
+ status = "okay";
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+ sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+ num-chipselects = <1>;
+
+ tpm@0 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ spi-max-frequency = <33000000>;
+ reg = <0>;
+ };
+ };
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x8000000>;
+ label = "flash1";
+ };
+ };
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd4_default
+ &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+ status = "okay";
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux32: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux33: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux34: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux35: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux36: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux37: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux38: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux39: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&sdhci1 {
+ max-frequency = <25000000>;
+ /*
+ * DMA mode needs to be disabled to avoid conflicts with UHCI
+ * Controller in AST2500 SoC.
+ */
+ sdhci-caps-mask = <0x0 0x580000>;
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v3 07/13] ARM: dts: aspeed: Add Facebook Wedge400-data64 (AST2500) BMC
2025-07-23 23:30 ` [PATCH v3 07/13] ARM: dts: aspeed: Add Facebook Wedge400-data64 (AST2500) BMC rentao.bupt
@ 2025-07-24 8:05 ` Krzysztof Kozlowski
2025-07-25 5:20 ` Tao Ren
0 siblings, 1 reply; 26+ messages in thread
From: Krzysztof Kozlowski @ 2025-07-24 8:05 UTC (permalink / raw)
To: rentao.bupt
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
On Wed, Jul 23, 2025 at 04:30:03PM -0700, rentao.bupt@gmail.com wrote:
> + /*
> + * PCA9548 (11-0076) provides 8 channels connecting to
> + * FCM (Fan Controller Module).
> + */
> + i2c32 = &imux32;
> + i2c33 = &imux33;
> + i2c34 = &imux34;
> + i2c35 = &imux35;
> + i2c36 = &imux36;
> + i2c37 = &imux37;
> + i2c38 = &imux38;
> + i2c39 = &imux39;
> +
> + spi2 = &spi_gpio;
> + };
> +
> + chosen {
> + stdout-path = &uart1;
> + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
Drop bootargs. You are duplicating stdout path and choice of root is
definitely not a mainline user friendly.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 07/13] ARM: dts: aspeed: Add Facebook Wedge400-data64 (AST2500) BMC
2025-07-24 8:05 ` Krzysztof Kozlowski
@ 2025-07-25 5:20 ` Tao Ren
0 siblings, 0 replies; 26+ messages in thread
From: Tao Ren @ 2025-07-25 5:20 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
On Thu, Jul 24, 2025 at 10:05:40AM +0200, Krzysztof Kozlowski wrote:
> On Wed, Jul 23, 2025 at 04:30:03PM -0700, rentao.bupt@gmail.com wrote:
> > + /*
> > + * PCA9548 (11-0076) provides 8 channels connecting to
> > + * FCM (Fan Controller Module).
> > + */
> > + i2c32 = &imux32;
> > + i2c33 = &imux33;
> > + i2c34 = &imux34;
> > + i2c35 = &imux35;
> > + i2c36 = &imux36;
> > + i2c37 = &imux37;
> > + i2c38 = &imux38;
> > + i2c39 = &imux39;
> > +
> > + spi2 = &spi_gpio;
> > + };
> > +
> > + chosen {
> > + stdout-path = &uart1;
> > + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
>
> Drop bootargs. You are duplicating stdout path and choice of root is
> definitely not a mainline user friendly.
>
> Best regards,
> Krzysztof
Got it. I will drop bootargs in v4.
Thanks,
Tao
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 08/13] ARM: dts: aspeed: wedge400: Include wedge400-data64.dts
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (6 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 07/13] ARM: dts: aspeed: Add Facebook Wedge400-data64 (AST2500) BMC rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-23 23:30 ` [PATCH v3 09/13] dt-bindings: arm: aspeed: add Facebook Fuji-data64 board rentao.bupt
` (6 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Include "wedge400-data64.dts" in wedge400 dts to avoid duplicated code.
Wedge400-data64 and Wedge400 are identical except the BMC flash layout.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None (the patch is introduced in v3).
.../aspeed/aspeed-bmc-facebook-wedge400.dts | 366 +-----------------
1 file changed, 2 insertions(+), 364 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index 3e4d30f0884d..ef0cfc51cda4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -1,376 +1,14 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
/ {
model = "Facebook Wedge 400 BMC";
compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
- aliases {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to
- * SCM (System Controller Module).
- */
- i2c16 = &imux16;
- i2c17 = &imux17;
- i2c18 = &imux18;
- i2c19 = &imux19;
- i2c20 = &imux20;
- i2c21 = &imux21;
- i2c22 = &imux22;
- i2c23 = &imux23;
-
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
- i2c28 = &imux28;
- i2c29 = &imux29;
- i2c30 = &imux30;
- i2c31 = &imux31;
-
- /*
- * PCA9548 (11-0076) provides 8 channels connecting to
- * FCM (Fan Controller Module).
- */
- i2c32 = &imux32;
- i2c33 = &imux33;
- i2c34 = &imux34;
- i2c35 = &imux35;
- i2c36 = &imux36;
- i2c37 = &imux37;
- i2c38 = &imux38;
- i2c39 = &imux39;
-
- spi2 = &spi_gpio;
- };
-
- chosen {
- stdout-path = &uart1;
- bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
- };
-
- ast-adc-hwmon {
- compatible = "iio-hwmon";
- io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
- <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
- };
-
- /*
- * GPIO-based SPI Master is required to access SPI TPM, because
- * full-duplex SPI transactions are not supported by ASPEED SPI
- * Controllers.
- */
- spi_gpio: spi {
- status = "okay";
- compatible = "spi-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
- sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
- mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
- miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
- num-chipselects = <1>;
-
- tpm@0 {
- compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
- spi-max-frequency = <33000000>;
- reg = <0>;
- };
- };
};
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
&fmc_flash0 {
+ /delete-node/partitions;
#include "facebook-bmc-flash-layout-128.dtsi"
};
-
-&fmc_flash1 {
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- flash1@0 {
- reg = <0x0 0x8000000>;
- label = "flash1";
- };
- };
-};
-
-&uart2 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd2_default
- &pinctrl_rxd2_default>;
-};
-
-&uart4 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd4_default
- &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
- status = "okay";
- multi-master;
- bus-frequency = <1000000>;
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux16: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux17: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux18: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux19: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux20: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux21: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux22: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux23: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2c8 {
- status = "okay";
-
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux28: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux29: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux30: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux31: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c9 {
- status = "okay";
-};
-
-&i2c10 {
- status = "okay";
-};
-
-&i2c11 {
- status = "okay";
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux32: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux33: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux34: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux35: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux36: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux37: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux38: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux39: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
-};
-
-&adc {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&uhci {
- status = "okay";
-};
-
-&sdhci1 {
- max-frequency = <25000000>;
- /*
- * DMA mode needs to be disabled to avoid conflicts with UHCI
- * Controller in AST2500 SoC.
- */
- sdhci-caps-mask = <0x0 0x580000>;
-};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 09/13] dt-bindings: arm: aspeed: add Facebook Fuji-data64 board
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (7 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 08/13] ARM: dts: aspeed: wedge400: Include wedge400-data64.dts rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-23 23:30 ` [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board rentao.bupt
` (5 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Document the new compatibles used on Meta/Facebook Fuji-data64 board.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None (the patch is introduced in v3).
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 0c9d6a30dce0..3cc6e62ae5f3 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -85,6 +85,7 @@ properties:
- facebook,cloudripper-bmc
- facebook,elbert-bmc
- facebook,fuji-bmc
+ - facebook,fuji-data64-bmc
- facebook,greatlakes-bmc
- facebook,harma-bmc
- facebook,minerva-cmc
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (8 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 09/13] dt-bindings: arm: aspeed: add Facebook Fuji-data64 board rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-24 0:03 ` Andrew Lunn
2025-07-23 23:30 ` [PATCH v3 11/13] ARM: dts: aspeed: facebook-fuji: Include facebook-fuji-data64.dts rentao.bupt
` (4 subsequent siblings)
14 siblings, 1 reply; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Introduce fuji-data64.dts to extend Meta/Facebook Fuji BMC's data0
partition without breaking the existing users.
Fuji-data64.dts is copied from fuji.dts with below changes:
- updating model/compatible strings.
- updating FMC flash0' data0 partition to 64MB.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None (the patch is introduced in v3).
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed-bmc-facebook-fuji-data64.dts | 1264 +++++++++++++++++
2 files changed, 1265 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index 55be25acfc80..f6e714b7db2d 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -21,6 +21,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-catalina.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-elbert.dtb \
+ aspeed-bmc-facebook-fuji-data64.dtb \
aspeed-bmc-facebook-fuji.dtb \
aspeed-bmc-facebook-galaxy100.dtb \
aspeed-bmc-facebook-greatlakes.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..e915119488ef
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1264 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Fuji BMC (64MB Datastore)";
+ compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+ aliases {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to
+ * SCM (System Controller Module).
+ */
+ i2c16 = &imux16;
+ i2c17 = &imux17;
+ i2c18 = &imux18;
+ i2c19 = &imux19;
+ i2c20 = &imux20;
+ i2c21 = &imux21;
+ i2c22 = &imux22;
+ i2c23 = &imux23;
+
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c24 = &imux24;
+ i2c25 = &imux25;
+ i2c26 = &imux26;
+ i2c27 = &imux27;
+ i2c28 = &imux28;
+ i2c29 = &imux29;
+ i2c30 = &imux30;
+ i2c31 = &imux31;
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to
+ * SMB (Switch Main Board).
+ */
+ i2c40 = &imux40;
+ i2c41 = &imux41;
+ i2c42 = &imux42;
+ i2c43 = &imux43;
+ i2c44 = &imux44;
+ i2c45 = &imux45;
+ i2c46 = &imux46;
+ i2c47 = &imux47;
+
+ /*
+ * PCA9548 (24-0071) provides 8 channels connecting to
+ * PDB-Left.
+ */
+ i2c48 = &imux48;
+ i2c49 = &imux49;
+ i2c50 = &imux50;
+ i2c51 = &imux51;
+ i2c52 = &imux52;
+ i2c53 = &imux53;
+ i2c54 = &imux54;
+ i2c55 = &imux55;
+
+ /*
+ * PCA9548 (25-0072) provides 8 channels connecting to
+ * PDB-Right.
+ */
+ i2c56 = &imux56;
+ i2c57 = &imux57;
+ i2c58 = &imux58;
+ i2c59 = &imux59;
+ i2c60 = &imux60;
+ i2c61 = &imux61;
+ i2c62 = &imux62;
+ i2c63 = &imux63;
+
+ /*
+ * PCA9548 (26-0076) provides 8 channels connecting to
+ * FCM1.
+ */
+ i2c64 = &imux64;
+ i2c65 = &imux65;
+ i2c66 = &imux66;
+ i2c67 = &imux67;
+ i2c68 = &imux68;
+ i2c69 = &imux69;
+ i2c70 = &imux70;
+ i2c71 = &imux71;
+
+ /*
+ * PCA9548 (27-0076) provides 8 channels connecting to
+ * FCM2.
+ */
+ i2c72 = &imux72;
+ i2c73 = &imux73;
+ i2c74 = &imux74;
+ i2c75 = &imux75;
+ i2c76 = &imux76;
+ i2c77 = &imux77;
+ i2c78 = &imux78;
+ i2c79 = &imux79;
+
+ /*
+ * PCA9548 (40-0076) provides 8 channels connecting to
+ * PIM1.
+ */
+ i2c80 = &imux80;
+ i2c81 = &imux81;
+ i2c82 = &imux82;
+ i2c83 = &imux83;
+ i2c84 = &imux84;
+ i2c85 = &imux85;
+ i2c86 = &imux86;
+ i2c87 = &imux87;
+
+ /*
+ * PCA9548 (41-0076) provides 8 channels connecting to
+ * PIM2.
+ */
+ i2c88 = &imux88;
+ i2c89 = &imux89;
+ i2c90 = &imux90;
+ i2c91 = &imux91;
+ i2c92 = &imux92;
+ i2c93 = &imux93;
+ i2c94 = &imux94;
+ i2c95 = &imux95;
+
+ /*
+ * PCA9548 (42-0076) provides 8 channels connecting to
+ * PIM3.
+ */
+ i2c96 = &imux96;
+ i2c97 = &imux97;
+ i2c98 = &imux98;
+ i2c99 = &imux99;
+ i2c100 = &imux100;
+ i2c101 = &imux101;
+ i2c102 = &imux102;
+ i2c103 = &imux103;
+
+ /*
+ * PCA9548 (43-0076) provides 8 channels connecting to
+ * PIM4.
+ */
+ i2c104 = &imux104;
+ i2c105 = &imux105;
+ i2c106 = &imux106;
+ i2c107 = &imux107;
+ i2c108 = &imux108;
+ i2c109 = &imux109;
+ i2c110 = &imux110;
+ i2c111 = &imux111;
+
+ /*
+ * PCA9548 (44-0076) provides 8 channels connecting to
+ * PIM5.
+ */
+ i2c112 = &imux112;
+ i2c113 = &imux113;
+ i2c114 = &imux114;
+ i2c115 = &imux115;
+ i2c116 = &imux116;
+ i2c117 = &imux117;
+ i2c118 = &imux118;
+ i2c119 = &imux119;
+
+ /*
+ * PCA9548 (45-0076) provides 8 channels connecting to
+ * PIM6.
+ */
+ i2c120 = &imux120;
+ i2c121 = &imux121;
+ i2c122 = &imux122;
+ i2c123 = &imux123;
+ i2c124 = &imux124;
+ i2c125 = &imux125;
+ i2c126 = &imux126;
+ i2c127 = &imux127;
+
+ /*
+ * PCA9548 (46-0076) provides 8 channels connecting to
+ * PIM7.
+ */
+ i2c128 = &imux128;
+ i2c129 = &imux129;
+ i2c130 = &imux130;
+ i2c131 = &imux131;
+ i2c132 = &imux132;
+ i2c133 = &imux133;
+ i2c134 = &imux134;
+ i2c135 = &imux135;
+
+ /*
+ * PCA9548 (47-0076) provides 8 channels connecting to
+ * PIM8.
+ */
+ i2c136 = &imux136;
+ i2c137 = &imux137;
+ i2c138 = &imux138;
+ i2c139 = &imux139;
+ i2c140 = &imux140;
+ i2c141 = &imux141;
+ i2c142 = &imux142;
+ i2c143 = &imux143;
+ };
+
+ spi_gpio: spi {
+ num-chipselects = <3>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+ <0>, /* device reg=<1> does not exist */
+ <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+ eeprom@2 {
+ compatible = "atmel,at93c46d";
+ spi-max-frequency = <250000>;
+ data-size = <16>;
+ spi-cs-high;
+ reg = <2>;
+ };
+ };
+};
+
+&fmc {
+ flash@0 {
+ /delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+ };
+};
+
+&i2c0 {
+ multi-master;
+ bus-frequency = <1000000>;
+};
+
+&i2c2 {
+ /*
+ * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+ * Controller Module).
+ */
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux16: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <1500>;
+ };
+ };
+
+ imux17: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux18: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux19: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux20: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux21: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux22: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux23: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+};
+
+&i2c8 {
+ /*
+ * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-mux@70 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x70>;
+ i2c-mux-idle-disconnect;
+
+ imux24: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-mux@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ i2c-mux-idle-disconnect;
+
+ imux48: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux49: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux50: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ lp5012@14 {
+ compatible = "ti,lp5012";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "sys";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "fan";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "psu";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+
+ multi-led@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+ label = "smb";
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ };
+ };
+ };
+
+ imux51: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux52: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux53: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux54: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux55: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux25: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-mux@72 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x72>;
+ i2c-mux-idle-disconnect;
+
+ imux56: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux57: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux58: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux59: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux60: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux61: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux62: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux63: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux26: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux64: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux65: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux66: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux67: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux68: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux69: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux70: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux71: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux27: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux72: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux73: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux74: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux75: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <250>;
+ };
+ };
+
+ imux76: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux77: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux78: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux79: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux28: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux29: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux30: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux31: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ /*
+ * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+ * Main Board).
+ */
+ i2c-mux@77 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x77>;
+ i2c-mux-idle-disconnect;
+
+ imux40: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux80: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux81: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux82: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux83: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux84: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux85: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux86: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux87: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux41: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux88: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux89: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux90: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux91: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux92: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux93: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux94: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux95: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux42: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux96: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux97: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux98: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux99: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux100: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux101: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux102: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux103: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux43: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux104: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux105: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux106: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux107: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux108: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux109: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux110: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux111: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux44: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux112: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux113: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux114: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux115: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux116: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux117: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux118: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux119: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux45: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux120: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux121: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux122: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux123: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux124: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux125: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux126: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux127: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux46: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux128: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux129: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux130: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux131: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux132: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux133: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux134: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux135: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ imux47: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ i2c-mux@76 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x76>;
+ i2c-mux-idle-disconnect;
+
+ imux136: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ imux137: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ imux138: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ imux139: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+
+ imux140: i2c@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ };
+
+ imux141: i2c@5 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <5>;
+ };
+
+ imux142: i2c@6 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <6>;
+ };
+
+ imux143: i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+ };
+ };
+
+ };
+
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&mdio1 {
+ status = "okay";
+
+ ethphy3: ethernet-phy@13 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0d>;
+ };
+};
+
+&mac3 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <ðphy3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-23 23:30 ` [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board rentao.bupt
@ 2025-07-24 0:03 ` Andrew Lunn
2025-07-24 1:03 ` Tao Ren
0 siblings, 1 reply; 26+ messages in thread
From: Andrew Lunn @ 2025-07-24 0:03 UTC (permalink / raw)
To: rentao.bupt
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Tao Ren
> +&mac3 {
> + status = "okay";
> + phy-mode = "rgmii";
Does the PCB have extra long clock lines to implement the 2ns delay?
Andrew
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-24 0:03 ` Andrew Lunn
@ 2025-07-24 1:03 ` Tao Ren
2025-07-24 12:53 ` Andrew Lunn
0 siblings, 1 reply; 26+ messages in thread
From: Tao Ren @ 2025-07-24 1:03 UTC (permalink / raw)
To: Andrew Lunn
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Tao Ren
On Thu, Jul 24, 2025 at 02:03:20AM +0200, Andrew Lunn wrote:
> > +&mac3 {
> > + status = "okay";
> > + phy-mode = "rgmii";
>
> Does the PCB have extra long clock lines to implement the 2ns delay?
>
> Andrew
Hi Andrew,
Thank you for catching it. I didn't notice the settings because the file
is copied from the exiting fuji.dts with minor changes.
The delay is currently introduced on MAC side (by manually setting SCU
registers), but I guess I can update phy-mode to "rgmii-id" so the delay
can be handled by the PHY?
Thanks,
Tao
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-24 1:03 ` Tao Ren
@ 2025-07-24 12:53 ` Andrew Lunn
2025-07-25 5:18 ` Tao Ren
0 siblings, 1 reply; 26+ messages in thread
From: Andrew Lunn @ 2025-07-24 12:53 UTC (permalink / raw)
To: Tao Ren
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Tao Ren
On Wed, Jul 23, 2025 at 06:03:49PM -0700, Tao Ren wrote:
> On Thu, Jul 24, 2025 at 02:03:20AM +0200, Andrew Lunn wrote:
> > > +&mac3 {
> > > + status = "okay";
> > > + phy-mode = "rgmii";
> >
> > Does the PCB have extra long clock lines to implement the 2ns delay?
> >
> > Andrew
>
> Hi Andrew,
>
> Thank you for catching it. I didn't notice the settings because the file
> is copied from the exiting fuji.dts with minor changes.
>
> The delay is currently introduced on MAC side (by manually setting SCU
> registers), but I guess I can update phy-mode to "rgmii-id" so the delay
> can be handled by the PHY?
That would be good, if it works. The problem with the current code is
that those SCU registers are not set as part of the MAC driver, so it
is hard to know what value they have.
Andrew
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-24 12:53 ` Andrew Lunn
@ 2025-07-25 5:18 ` Tao Ren
2025-07-27 5:57 ` Tao Ren
0 siblings, 1 reply; 26+ messages in thread
From: Tao Ren @ 2025-07-25 5:18 UTC (permalink / raw)
To: Andrew Lunn
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Tao Ren
On Thu, Jul 24, 2025 at 02:53:39PM +0200, Andrew Lunn wrote:
> On Wed, Jul 23, 2025 at 06:03:49PM -0700, Tao Ren wrote:
> > On Thu, Jul 24, 2025 at 02:03:20AM +0200, Andrew Lunn wrote:
> > > > +&mac3 {
> > > > + status = "okay";
> > > > + phy-mode = "rgmii";
> > >
> > > Does the PCB have extra long clock lines to implement the 2ns delay?
> > >
> > > Andrew
> >
> > Hi Andrew,
> >
> > Thank you for catching it. I didn't notice the settings because the file
> > is copied from the exiting fuji.dts with minor changes.
> >
> > The delay is currently introduced on MAC side (by manually setting SCU
> > registers), but I guess I can update phy-mode to "rgmii-id" so the delay
> > can be handled by the PHY?
>
> That would be good, if it works. The problem with the current code is
> that those SCU registers are not set as part of the MAC driver, so it
> is hard to know what value they have.
>
> Andrew
Hi Andrew,
I set phy-mode to rgmii-id (letting BCM54616S handle RX/TX delay) and
cleared SCU350 (MAC3/4 RGMII delay) register, but somehow BMC is not
reachable over ethernet.
Let me see if I missed other settings. I will drop the mac entry from v4
if I cannot make it work by next Monday.
Thanks,
Tao
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-25 5:18 ` Tao Ren
@ 2025-07-27 5:57 ` Tao Ren
2025-07-27 15:45 ` Andrew Lunn
0 siblings, 1 reply; 26+ messages in thread
From: Tao Ren @ 2025-07-27 5:57 UTC (permalink / raw)
To: Andrew Lunn
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Tao Ren
On Thu, Jul 24, 2025 at 10:18:57PM -0700, Tao Ren wrote:
> On Thu, Jul 24, 2025 at 02:53:39PM +0200, Andrew Lunn wrote:
> > On Wed, Jul 23, 2025 at 06:03:49PM -0700, Tao Ren wrote:
> > > On Thu, Jul 24, 2025 at 02:03:20AM +0200, Andrew Lunn wrote:
> > > > > +&mac3 {
> > > > > + status = "okay";
> > > > > + phy-mode = "rgmii";
> > > >
> > > > Does the PCB have extra long clock lines to implement the 2ns delay?
> > > >
> > > > Andrew
> > >
> > > Hi Andrew,
> > >
> > > Thank you for catching it. I didn't notice the settings because the file
> > > is copied from the exiting fuji.dts with minor changes.
> > >
> > > The delay is currently introduced on MAC side (by manually setting SCU
> > > registers), but I guess I can update phy-mode to "rgmii-id" so the delay
> > > can be handled by the PHY?
> >
> > That would be good, if it works. The problem with the current code is
> > that those SCU registers are not set as part of the MAC driver, so it
> > is hard to know what value they have.
> >
> > Andrew
>
> Hi Andrew,
>
> I set phy-mode to rgmii-id (letting BCM54616S handle RX/TX delay) and
> cleared SCU350 (MAC3/4 RGMII delay) register, but somehow BMC is not
> reachable over ethernet.
>
> Let me see if I missed other settings. I will drop the mac entry from v4
> if I cannot make it work by next Monday.
Hi Andrew,
I made it "work" by updating phy-mode to rgmii-txid, and it seems like
AST2600 MAC introduces RX delay even though RXCLK delay setting is 0 in
SCU350 register.
As I'm not 100% sure where the RX clock delay is introduced, I will drop
mac3 entry in v4.
Thanks,
Tao
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-27 5:57 ` Tao Ren
@ 2025-07-27 15:45 ` Andrew Lunn
2025-07-28 5:34 ` Tao Ren
0 siblings, 1 reply; 26+ messages in thread
From: Andrew Lunn @ 2025-07-27 15:45 UTC (permalink / raw)
To: Tao Ren
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Tao Ren
> As I'm not 100% sure where the RX clock delay is introduced, I will drop
> mac3 entry in v4.
Many of the hyperscalers, or the supplies to the hyperscalers keep
hitting this. The standard policy at the moment seems to be to drop
Ethernet support. How useful is a BMC without Ethernet?
If you all got together and talked to aspeed, apply a bit of pressure,
it should be possible to get this mess fixed pretty quickly. And then
you could all have working Ethernet....
Andrew
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
2025-07-27 15:45 ` Andrew Lunn
@ 2025-07-28 5:34 ` Tao Ren
0 siblings, 0 replies; 26+ messages in thread
From: Tao Ren @ 2025-07-28 5:34 UTC (permalink / raw)
To: Andrew Lunn
Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Tao Ren
On Sun, Jul 27, 2025 at 05:45:51PM +0200, Andrew Lunn wrote:
> > As I'm not 100% sure where the RX clock delay is introduced, I will drop
> > mac3 entry in v4.
>
> Many of the hyperscalers, or the supplies to the hyperscalers keep
> hitting this. The standard policy at the moment seems to be to drop
> Ethernet support. How useful is a BMC without Ethernet?
>
> If you all got together and talked to aspeed, apply a bit of pressure,
> it should be possible to get this mess fixed pretty quickly. And then
> you could all have working Ethernet....
Hi Andrew,
I've already reached out to Ryan and Jacky from ASPEED regarding the
topic a few weeks ago. Originally I thought MAC-side clock delay was
only needed for fixed-linked (for example, in darwin dts), but looks
like it's also impacting platforms with PHY..
Anyways I will follow up with Jacky/Ryan after addressing all the
comments for this patch series.
Thanks,
Tao
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH v3 11/13] ARM: dts: aspeed: facebook-fuji: Include facebook-fuji-data64.dts
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (9 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-23 23:30 ` [PATCH v3 12/13] dt-bindings: arm: aspeed: add Facebook Darwin board rentao.bupt
` (3 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Include "facebook-fuji-data64.dts" in facebook-fuji dts to avoid
duplicated code.
Fuji-data64 and Fuji are identical except the BMC flash layout.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- None (the patch is introduced in v3).
.../dts/aspeed/aspeed-bmc-facebook-fuji.dts | 1251 +----------------
1 file changed, 5 insertions(+), 1246 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
index d0331980d082..5dc2a165e441 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -1,1257 +1,16 @@
// SPDX-License-Identifier: GPL-2.0+
// Copyright (c) 2020 Facebook Inc.
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-fuji-data64.dts"
/ {
model = "Facebook Fuji BMC";
compatible = "facebook,fuji-bmc", "aspeed,ast2600";
-
- aliases {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to
- * SCM (System Controller Module).
- */
- i2c16 = &imux16;
- i2c17 = &imux17;
- i2c18 = &imux18;
- i2c19 = &imux19;
- i2c20 = &imux20;
- i2c21 = &imux21;
- i2c22 = &imux22;
- i2c23 = &imux23;
-
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c24 = &imux24;
- i2c25 = &imux25;
- i2c26 = &imux26;
- i2c27 = &imux27;
- i2c28 = &imux28;
- i2c29 = &imux29;
- i2c30 = &imux30;
- i2c31 = &imux31;
-
- /*
- * PCA9548 (11-0077) provides 8 channels connecting to
- * SMB (Switch Main Board).
- */
- i2c40 = &imux40;
- i2c41 = &imux41;
- i2c42 = &imux42;
- i2c43 = &imux43;
- i2c44 = &imux44;
- i2c45 = &imux45;
- i2c46 = &imux46;
- i2c47 = &imux47;
-
- /*
- * PCA9548 (24-0071) provides 8 channels connecting to
- * PDB-Left.
- */
- i2c48 = &imux48;
- i2c49 = &imux49;
- i2c50 = &imux50;
- i2c51 = &imux51;
- i2c52 = &imux52;
- i2c53 = &imux53;
- i2c54 = &imux54;
- i2c55 = &imux55;
-
- /*
- * PCA9548 (25-0072) provides 8 channels connecting to
- * PDB-Right.
- */
- i2c56 = &imux56;
- i2c57 = &imux57;
- i2c58 = &imux58;
- i2c59 = &imux59;
- i2c60 = &imux60;
- i2c61 = &imux61;
- i2c62 = &imux62;
- i2c63 = &imux63;
-
- /*
- * PCA9548 (26-0076) provides 8 channels connecting to
- * FCM1.
- */
- i2c64 = &imux64;
- i2c65 = &imux65;
- i2c66 = &imux66;
- i2c67 = &imux67;
- i2c68 = &imux68;
- i2c69 = &imux69;
- i2c70 = &imux70;
- i2c71 = &imux71;
-
- /*
- * PCA9548 (27-0076) provides 8 channels connecting to
- * FCM2.
- */
- i2c72 = &imux72;
- i2c73 = &imux73;
- i2c74 = &imux74;
- i2c75 = &imux75;
- i2c76 = &imux76;
- i2c77 = &imux77;
- i2c78 = &imux78;
- i2c79 = &imux79;
-
- /*
- * PCA9548 (40-0076) provides 8 channels connecting to
- * PIM1.
- */
- i2c80 = &imux80;
- i2c81 = &imux81;
- i2c82 = &imux82;
- i2c83 = &imux83;
- i2c84 = &imux84;
- i2c85 = &imux85;
- i2c86 = &imux86;
- i2c87 = &imux87;
-
- /*
- * PCA9548 (41-0076) provides 8 channels connecting to
- * PIM2.
- */
- i2c88 = &imux88;
- i2c89 = &imux89;
- i2c90 = &imux90;
- i2c91 = &imux91;
- i2c92 = &imux92;
- i2c93 = &imux93;
- i2c94 = &imux94;
- i2c95 = &imux95;
-
- /*
- * PCA9548 (42-0076) provides 8 channels connecting to
- * PIM3.
- */
- i2c96 = &imux96;
- i2c97 = &imux97;
- i2c98 = &imux98;
- i2c99 = &imux99;
- i2c100 = &imux100;
- i2c101 = &imux101;
- i2c102 = &imux102;
- i2c103 = &imux103;
-
- /*
- * PCA9548 (43-0076) provides 8 channels connecting to
- * PIM4.
- */
- i2c104 = &imux104;
- i2c105 = &imux105;
- i2c106 = &imux106;
- i2c107 = &imux107;
- i2c108 = &imux108;
- i2c109 = &imux109;
- i2c110 = &imux110;
- i2c111 = &imux111;
-
- /*
- * PCA9548 (44-0076) provides 8 channels connecting to
- * PIM5.
- */
- i2c112 = &imux112;
- i2c113 = &imux113;
- i2c114 = &imux114;
- i2c115 = &imux115;
- i2c116 = &imux116;
- i2c117 = &imux117;
- i2c118 = &imux118;
- i2c119 = &imux119;
-
- /*
- * PCA9548 (45-0076) provides 8 channels connecting to
- * PIM6.
- */
- i2c120 = &imux120;
- i2c121 = &imux121;
- i2c122 = &imux122;
- i2c123 = &imux123;
- i2c124 = &imux124;
- i2c125 = &imux125;
- i2c126 = &imux126;
- i2c127 = &imux127;
-
- /*
- * PCA9548 (46-0076) provides 8 channels connecting to
- * PIM7.
- */
- i2c128 = &imux128;
- i2c129 = &imux129;
- i2c130 = &imux130;
- i2c131 = &imux131;
- i2c132 = &imux132;
- i2c133 = &imux133;
- i2c134 = &imux134;
- i2c135 = &imux135;
-
- /*
- * PCA9548 (47-0076) provides 8 channels connecting to
- * PIM8.
- */
- i2c136 = &imux136;
- i2c137 = &imux137;
- i2c138 = &imux138;
- i2c139 = &imux139;
- i2c140 = &imux140;
- i2c141 = &imux141;
- i2c142 = &imux142;
- i2c143 = &imux143;
- };
-
- spi_gpio: spi {
- num-chipselects = <3>;
- cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
- <0>, /* device reg=<1> does not exist */
- <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-
- eeprom@2 {
- compatible = "atmel,at93c46d";
- spi-max-frequency = <250000>;
- data-size = <16>;
- spi-cs-high;
- reg = <2>;
- };
- };
-};
-
-&i2c0 {
- multi-master;
- bus-frequency = <1000000>;
-};
-
-&i2c2 {
- /*
- * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
- * Controller Module).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux16: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- adm1278@10 {
- compatible = "adi,adm1278";
- reg = <0x10>;
- shunt-resistor-micro-ohms = <1500>;
- };
- };
-
- imux17: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux18: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux19: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux20: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux21: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux22: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux23: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-};
-
-&i2c8 {
- /*
- * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
- * Main Board).
- */
- i2c-mux@70 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x70>;
- i2c-mux-idle-disconnect;
-
- imux24: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- i2c-mux@71 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x71>;
- i2c-mux-idle-disconnect;
-
- imux48: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux49: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux50: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- lp5012@14 {
- compatible = "ti,lp5012";
- reg = <0x14>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- multi-led@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "sys";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "fan";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "psu";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
-
- multi-led@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- color = <LED_COLOR_ID_MULTI>;
- function = LED_FUNCTION_ACTIVITY;
- label = "smb";
-
- led@0 {
- reg = <0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@2 {
- reg = <2>;
- color = <LED_COLOR_ID_GREEN>;
- };
- };
- };
- };
-
- imux51: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux52: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux53: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux54: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux55: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux25: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- i2c-mux@72 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x72>;
- i2c-mux-idle-disconnect;
-
- imux56: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux57: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux58: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux59: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux60: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux61: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux62: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux63: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux26: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux64: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux65: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux66: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux67: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- adm1278@10 {
- compatible = "adi,adm1278";
- reg = <0x10>;
- shunt-resistor-micro-ohms = <250>;
- };
- };
-
- imux68: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux69: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux70: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux71: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux27: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux72: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux73: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux74: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux75: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- adm1278@10 {
- compatible = "adi,adm1278";
- reg = <0x10>;
- shunt-resistor-micro-ohms = <250>;
- };
- };
-
- imux76: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux77: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux78: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux79: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux28: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux29: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux30: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux31: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
-
- };
-};
-
-&i2c11 {
- status = "okay";
-
- /*
- * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
- * Main Board).
- */
- i2c-mux@77 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x77>;
- i2c-mux-idle-disconnect;
-
- imux40: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux80: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux81: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux82: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux83: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux84: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux85: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux86: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux87: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux41: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux88: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux89: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux90: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux91: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux92: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux93: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux94: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux95: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux42: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux96: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux97: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux98: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux99: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux100: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux101: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux102: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux103: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux43: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux104: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux105: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux106: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux107: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux108: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux109: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux110: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux111: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux44: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux112: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux113: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux114: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux115: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux116: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux117: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux118: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux119: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux45: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux120: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux121: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux122: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux123: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux124: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux125: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux126: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux127: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux46: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux128: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux129: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux130: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux131: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux132: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux133: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux134: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux135: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- imux47: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
-
- i2c-mux@76 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x76>;
- i2c-mux-idle-disconnect;
-
- imux136: i2c@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
- };
-
- imux137: i2c@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <1>;
- };
-
- imux138: i2c@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <2>;
- };
-
- imux139: i2c@3 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <3>;
- };
-
- imux140: i2c@4 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <4>;
- };
-
- imux141: i2c@5 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <5>;
- };
-
- imux142: i2c@6 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <6>;
- };
-
- imux143: i2c@7 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <7>;
- };
- };
-
- };
-
- };
};
-&ehci1 {
- status = "okay";
-};
-
-&mdio1 {
- status = "okay";
-
- ethphy3: ethernet-phy@13 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0x0d>;
+&fmc {
+ flash@0 {
+ /delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
};
};
-
-&mac3 {
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <ðphy3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
-
-&emmc_controller {
- status = "okay";
-};
-
-&emmc {
- status = "okay";
-
- non-removable;
- max-frequency = <25000000>;
- bus-width = <4>;
-};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 12/13] dt-bindings: arm: aspeed: add Facebook Darwin board
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (10 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 11/13] ARM: dts: aspeed: facebook-fuji: Include facebook-fuji-data64.dts rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-23 23:30 ` [PATCH v3 13/13] ARM: dts: aspeed: Add Facebook Darwin (AST2600) BMC rentao.bupt
` (2 subsequent siblings)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren, Krzysztof Kozlowski
From: Tao Ren <rentao.bupt@gmail.com>
Document the new compatibles used on Meta/Facebook Darwin board.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Changes in v3:
- None.
Changes in v2:
- None (the patch is introduced in v2).
Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
index 3cc6e62ae5f3..2887565d4170 100644
--- a/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
+++ b/Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml
@@ -83,6 +83,7 @@ properties:
- facebook,bletchley-bmc
- facebook,catalina-bmc
- facebook,cloudripper-bmc
+ - facebook,darwin-bmc
- facebook,elbert-bmc
- facebook,fuji-bmc
- facebook,fuji-data64-bmc
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* [PATCH v3 13/13] ARM: dts: aspeed: Add Facebook Darwin (AST2600) BMC
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (11 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 12/13] dt-bindings: arm: aspeed: add Facebook Darwin board rentao.bupt
@ 2025-07-23 23:30 ` rentao.bupt
2025-07-23 23:44 ` [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts Tao Ren
2025-07-25 3:19 ` Rob Herring (Arm)
14 siblings, 0 replies; 26+ messages in thread
From: rentao.bupt @ 2025-07-23 23:30 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
Cc: Tao Ren
From: Tao Ren <rentao.bupt@gmail.com>
Add initial device tree for the Meta (Facebook) Darwin AST2600 BMC.
Darwin is Meta's rack switch platform with an AST2600 BMC integrated for
health monitoring purpose.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
Changes in v3:
- Removed flash layout (use the "default" in common.dtsi).
Changes in v2:
- Removed mac3 controller.
- Fixed DTB warnings.
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-facebook-darwin.dts | 72 +++++++++++++++++++
2 files changed, 73 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index f6e714b7db2d..dce32ee0ace7 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-facebook-bletchley.dtb \
aspeed-bmc-facebook-catalina.dtb \
aspeed-bmc-facebook-cmm.dtb \
+ aspeed-bmc-facebook-darwin.dtb \
aspeed-bmc-facebook-elbert.dtb \
aspeed-bmc-facebook-fuji-data64.dtb \
aspeed-bmc-facebook-fuji.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+ model = "Facebook Darwin BMC";
+ compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+ aliases {
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+ <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+ <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+ <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+ };
+
+ spi_gpio: spi {
+ num-chipselects = <1>;
+ cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c0 {
+ eeprom@50 {
+ compatible = "atmel,24c512";
+ reg = <0x50>;
+ };
+};
+
+&adc0 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default
+ &pinctrl_adc4_default &pinctrl_adc5_default
+ &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+ status = "okay";
+
+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+ &pinctrl_adc10_default &pinctrl_adc11_default
+ &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+ status = "okay";
+};
+
+&emmc {
+ status = "okay";
+
+ non-removable;
+ max-frequency = <25000000>;
+ bus-width = <4>;
+};
--
2.47.3
^ permalink raw reply related [flat|nested] 26+ messages in thread* Re: [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (12 preceding siblings ...)
2025-07-23 23:30 ` [PATCH v3 13/13] ARM: dts: aspeed: Add Facebook Darwin (AST2600) BMC rentao.bupt
@ 2025-07-23 23:44 ` Tao Ren
2025-07-25 3:19 ` Rob Herring (Arm)
14 siblings, 0 replies; 26+ messages in thread
From: Tao Ren @ 2025-07-23 23:44 UTC (permalink / raw)
To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
Andrew Jeffery, devicetree, linux-arm-kernel, linux-aspeed,
linux-kernel, Andrew Lunn, Tao Ren
On Wed, Jul 23, 2025 at 04:29:56PM -0700, rentao.bupt@gmail.com wrote:
> From: Tao Ren <rentao.bupt@gmail.com>
>
> The patch series introduces the initial device tree for Meta/Facebook
> Darwin AST2600 BMC.
>
> Patches #1, #2 and #3 fixes the DTB warnings in wedge400/fuji dts and
> ast2600-facebook-netbmc-common.dtsi.
>
> Patch #4 moves eMMC entries from ast2600-facebook-netbmc-common.dtsi to
> each BMC platform because eMMC was removed from future Meta Network BMC
> platforms.
>
> Patch #5 introduces new BMC flash layout with 64MB data partition.
>
> Patches #6, #7 and #8 add "wedge400-data64-bmc" board. "wedge400-bmc"
> and "wedge400-data64-bmc" are identical except BMC flash layout.
>
> Patches #9, #10 and #11 add "fuji-data64-bmc" board. "fuji-bmc" and
> "fuji-data64-bmc" are identical except BMC flash layout.
>
> Patches #12 and #13 add Meta Darwin BMC and updates devicetree
> bindings.
Hi Andrew,
Sorry the patch series grow bigger and bigger, and thanks again for the
review.
Besides, the patch series is applied on top of the latest mainline, and
we may need to rebase when v6.17-rc1 is ready. Please let me know if I
need to hold my patches till v6.17-rc1.
Cheers,
- Tao
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts
2025-07-23 23:29 [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts rentao.bupt
` (13 preceding siblings ...)
2025-07-23 23:44 ` [PATCH v3 00/13] ARM: dts: aspeed: Add Meta Darwin dts Tao Ren
@ 2025-07-25 3:19 ` Rob Herring (Arm)
14 siblings, 0 replies; 26+ messages in thread
From: Rob Herring (Arm) @ 2025-07-25 3:19 UTC (permalink / raw)
To: rentao.bupt
Cc: Conor Dooley, Joel Stanley, linux-arm-kernel, linux-kernel,
linux-aspeed, Andrew Lunn, Krzysztof Kozlowski, Andrew Jeffery,
devicetree, Tao Ren
On Wed, 23 Jul 2025 16:29:56 -0700, rentao.bupt@gmail.com wrote:
> From: Tao Ren <rentao.bupt@gmail.com>
>
> The patch series introduces the initial device tree for Meta/Facebook
> Darwin AST2600 BMC.
>
> Patches #1, #2 and #3 fixes the DTB warnings in wedge400/fuji dts and
> ast2600-facebook-netbmc-common.dtsi.
>
> Patch #4 moves eMMC entries from ast2600-facebook-netbmc-common.dtsi to
> each BMC platform because eMMC was removed from future Meta Network BMC
> platforms.
>
> Patch #5 introduces new BMC flash layout with 64MB data partition.
>
> Patches #6, #7 and #8 add "wedge400-data64-bmc" board. "wedge400-bmc"
> and "wedge400-data64-bmc" are identical except BMC flash layout.
>
> Patches #9, #10 and #11 add "fuji-data64-bmc" board. "fuji-bmc" and
> "fuji-data64-bmc" are identical except BMC flash layout.
>
> Patches #12 and #13 add Meta Darwin BMC and updates devicetree
> bindings.
>
> Tao Ren (13):
> ARM: dts: aspeed: wedge400: Fix DTB warnings
> ARM: dts: aspeed: fuji: Fix DTB warnings
> ARM: dts: aspeed: Fix DTB warnings in
> ast2600-facebook-netbmc-common.dtsi
> ARM: dts: aspeed: Move eMMC out of ast2600-facebook-netbmc-common.dtsi
> ARM: dts: aspeed: Add facebook-bmc-flash-layout-128-data64.dtsi
> dt-bindings: arm: aspeed: add Facebook Wedge400-data64 board
> ARM: dts: aspeed: Add Facebook Wedge400-data64 (AST2500) BMC
> ARM: dts: aspeed: wedge400: Include wedge400-data64.dts
> dt-bindings: arm: aspeed: add Facebook Fuji-data64 board
> ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board
> ARM: dts: aspeed: facebook-fuji: Include facebook-fuji-data64.dts
> dt-bindings: arm: aspeed: add Facebook Darwin board
> ARM: dts: aspeed: Add Facebook Darwin (AST2600) BMC
>
> .../bindings/arm/aspeed/aspeed.yaml | 3 +
> arch/arm/boot/dts/aspeed/Makefile | 3 +
> .../dts/aspeed/aspeed-bmc-facebook-darwin.dts | 72 +
> .../dts/aspeed/aspeed-bmc-facebook-elbert.dts | 12 +
> .../aspeed-bmc-facebook-fuji-data64.dts | 1264 +++++++++++++++++
> .../dts/aspeed/aspeed-bmc-facebook-fuji.dts | 1245 +---------------
> .../aspeed-bmc-facebook-wedge400-data64.dts | 376 +++++
> .../aspeed/aspeed-bmc-facebook-wedge400.dts | 366 +----
> .../ast2600-facebook-netbmc-common.dtsi | 22 +-
> .../facebook-bmc-flash-layout-128-data64.dtsi | 60 +
> 10 files changed, 1804 insertions(+), 1619 deletions(-)
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
> create mode 100644 arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
>
> --
> 2.47.3
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: attempting to guess base-commit...
Base: remotes/next/fs-next-11017-gdc9b385a8a2e (best guess, 4/6 blobs matched)
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250723233013.142337-1-rentao.bupt@gmail.com:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: /ahb/apb/memory-controller@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2500-sdram-edac']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: /ahb/apb/syscon@1e6e2000/p2a-control@2c: failed to match any schema with compatible: ['aspeed,ast2500-p2a-ctrl']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2500-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: sd-controller@1e740000 (aspeed,ast2500-sd-controller): sdhci@200: Unevaluated properties are not allowed ('sdhci-caps-mask' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: /ahb/apb/pwm-tacho-controller@1e786000: failed to match any schema with compatible: ['aspeed,ast2500-pwm-tacho']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: lpc@1e789000 (aspeed,ast2500-lpc-v2): reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: lpc@1e789000 (aspeed,ast2500-lpc-v2): lpc-snoop@90: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2500-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2500-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-qcom-dc-scm-v1.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: bus@1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: syscon@1e6e2000 (aspeed,ast2600-scu): 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: adc@1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: adc@1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: crypto@1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: lpc@1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop@80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: kcs@24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: kcs@28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: kcs@2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: kcs@114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: sdc@1e740000 (aspeed,ast2600-sd-controller): sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: fsi@1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: fsi@1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
^ permalink raw reply [flat|nested] 26+ messages in thread