Re: [PATCH v3 10/13] ARM: dts: aspeed: Add Facebook Fuji-data64 (AST2600) Board

[Tao Ren <rentao.bupt@gmail.com>]

On Thu, Jul 24, 2025 at 10:18:57PM -0700, Tao Ren wrote:
> On Thu, Jul 24, 2025 at 02:53:39PM +0200, Andrew Lunn wrote:
> > On Wed, Jul 23, 2025 at 06:03:49PM -0700, Tao Ren wrote:
> > > On Thu, Jul 24, 2025 at 02:03:20AM +0200, Andrew Lunn wrote:
> > > > > +&mac3 {
> > > > > +	status = "okay";
> > > > > +	phy-mode = "rgmii";
> > > > 
> > > > Does the PCB have extra long clock lines to implement the 2ns delay?
> > > > 
> > > > 	Andrew
> > > 
> > > Hi Andrew,
> > > 
> > > Thank you for catching it. I didn't notice the settings because the file
> > > is copied from the exiting fuji.dts with minor changes.
> > > 
> > > The delay is currently introduced on MAC side (by manually setting SCU
> > > registers), but I guess I can update phy-mode to "rgmii-id" so the delay
> > > can be handled by the PHY?
> > 
> > That would be good, if it works. The problem with the current code is
> > that those SCU registers are not set as part of the MAC driver, so it
> > is hard to know what value they have.
> > 
> > 	Andrew
> 
> Hi Andrew,
> 
> I set phy-mode to rgmii-id (letting BCM54616S handle RX/TX delay) and
> cleared SCU350 (MAC3/4 RGMII delay) register, but somehow BMC is not
> reachable over ethernet.
> 
> Let me see if I missed other settings. I will drop the mac entry from v4
> if I cannot make it work by next Monday.

Hi Andrew,

I made it "work" by updating phy-mode to rgmii-txid, and it seems like
AST2600 MAC introduces RX delay even though RXCLK delay setting is 0 in
SCU350 register.

As I'm not 100% sure where the RX clock delay is introduced, I will drop
mac3 entry in v4.


Thanks,

Tao